2003 Power Supply Roundup Part II: Better Faster Cheaper
by Kristopher Kubicki on July 31, 2003 1:58 PM EST- Posted in
- Cases/Cooling/PSUs
An alarming trend we noticed with our roundup was that power supplies with fan controls on the rear of the unit have problems keeping tight tolerances. We looked into the problem a little more and noticed that while the components on the inside of the unit were of good quality, the fan control switches themselves were not.
Often the worst cases were fan control power supplies with often poor locking mechanisms. For example, the TTGI power supplies sometimes let the control switch slip slightly, resulting in a switch that rested half way between “high” and “low”. As a result, the poor contact produced incredibly awful ripple tests as demonstrated below.
Fan Control out of Place Voltages
|
|
+12V Low |
+12V High |
|
Kingwin KWI-450WABK |
11.830 |
12.225 |
|
TTGI/SuperFlower 520SS 4Fan |
11.820 |
12.240 |
|
TTGI/SuperFlower 420SS |
11.850 |
12.225 |
|
TTGI/SuperFlower 350SS |
11.875 |
12.305 |
|
Vantec Ion 400W |
11.780 |
12.005 |
|
Vantec Stealth 520W |
11.750 |
12.010 |
Edit:Although these measurements do not show the +12V rail out of specification from the ATX12V 1.2 document, they are much different from the measurements obtained on the previous page. This change warrants some attention, since if unchecked, poor signals will damage your hardware. Newer motherboards attempt to purify signals coming on the motherboard to prevent catastrophic failure, but voltages over the rails not feeding to the motherboard are very susceptible to failure (this puts a video card or hard drive in serious jeopardy).
After contacting manufacturers with this information, we got confirmation from companies stating that they planned on dropping the fan control from their power supplies. Vantec told us that dropping this controller actually lowers their cost significantly, and the savings would be then relayed to the consumer. Consider how much you actually use the fan control on your power supply (if you have one). Our opinion is that the tradeoff will be well worth it.
Facebook
Twitter
RSS
70 Comments
View All Comments
Anonymous User - Monday, August 18, 2003 - link
I cast another vote for us to be able to get a copy of the modified version of memtest86. I'd love to check to find out how much bit-flipping is happening over time on my various PCs. In addition, it seems to me that it would be a good way to see if ECC memory is actually doing what it should be. (If a bit gets flipped on a board with ECC memory that's supposed to support ECC memory then there's obviously something wrong).Also, you should give a copy of your modified source to the memtest people so that they might include the long delay time as an option in a new version.
Anonymous User - Sunday, August 17, 2003 - link
Any chance of a review of the silentmaxx fanless 350W. This thing has no fans so in theory it should be 0Dba! Not sure where the poewsupply is up to the job though on the poewer front - a review owuld be great. Cost as you probably guess is on the high side...http://www.silentmaxx.net/silent_products/power_su...
Anonymous User - Wednesday, August 13, 2003 - link
To me the most interesting data from this roundup was the instability a PS can cause to a system. I think this subject is worth a dedicated article. Also how can we reproduce this data at home? Where can we get the modified memtest86?Anonymous User - Wednesday, August 13, 2003 - link
Hello!!??? Seasonic power supplies?? These have to be the quiestest power suplies I have ever (NOT) heard. Appears to be pretty well constructed. These should realy be included in any decent, comprehensive power supply round-up.Anonymous User - Monday, August 11, 2003 - link
They didn't look at the seasonic brand. recommended herehttp://www.silentpcreview.com/modules.php?op=modlo...
Anonymous User - Monday, August 11, 2003 - link
I got a PC P&C Silencer 300 a while back, and I was very unimpressed with its noise level. It was hardly quieter than the cheapo PSU it replaced. My Enermax 365 and Antec Truepower 350 are much better.How about reviewing Seasonic? I hear they're super quiet. A little hard to find, though...
Anonymous User - Monday, August 11, 2003 - link
Untill all power supply manufacturers get it together and sheath their cables, we are pretty much stuck with what they offer. I solved this in my window case with some electrical conduit from the auto parts store. there are a few color choices including your basic black, but any of them make a world of difference hiding those unsightly P.S. cables. That and a little electrical tape over the white connector and they almost disappear.Anonymous User - Monday, August 11, 2003 - link
Another extremely happy user with a PCP&C Silencer power supply. I do have to question just a bit why the reviewer didn't find out about their existence on his own, noise being the primary complaint in his review (though I imagine the sheer number of power supplies being reviewed and perhaps deadline pressure could have been factors).Anonymous User - Sunday, August 10, 2003 - link
This is actually the third power supply review on Anandtech. Not the second as you wrote.Anonymous User - Thursday, August 7, 2003 - link
#16, please check out http://www.wikipedia.org/wiki/CPU_power_consumptio... for information on power consumption of several common CPUs (especially AMD).