2003 Power Supply Roundup Part II: Better Faster Cheaper
by Kristopher Kubicki on July 31, 2003 1:58 PM EST- Posted in
- Cases/Cooling/PSUs
A great representation of balance between power, price, stability and noise came in the form of Fortron’s FSP400-60PFN power supply. We were particularly pleased this unit was able to produce a great amount of stability, while keeping noise levels way down. Most of Fortron’s power supplies carry the same OEM components as Sparkle and Zalman, so many of their products appear identical.
The unimpressive looking power supply impressed us the minute we turned it because we could not hear it. Whereas some power supplies emit a slight whine or purr of fans, this power supply was literally inaudible. Our only complaint is that the ATX cable was not sheathed. Since this is a relatively inexpensive unit, you should invest in some cable management. The power supply does come with a motherboard monitoring cable, and some units ship with Serial ATA adaptors. The unit is also rated with Active PFC.
Wattages
|
|
3.3V |
5V |
12V |
-12 |
-5 |
+5vsb |
combined theoretical |
actual combined |
advertised total |
|
Fortron FSP400-60PFN |
92.40 |
200.00 |
180.00 |
9.60 |
1.50 |
10.00 |
292.40 |
235.00 |
400.00 |
We can see that the combined rail on this power supply is capable of 235W. This is actually higher than some power supplies in the 500W range. For AMD users, the FSP400 will work well with AMD processors, since the majority of the power from the unit is coming in on the +3.3V and +5V rails.
The FSP400-60PFN retails for under $60. As far as other power supplies go, this is a little higher than what you will pay for a TurboLink or Allied. On the other hand, this Fortron unit comes with respectable features, and good performance. It should be mentioned that Sparkle (SPI) has an identical unit with the same SKU (FSP400-60PFN) for about the same price.
Facebook
Twitter
RSS
70 Comments
View All Comments
Anonymous User - Saturday, August 2, 2003 - link
#11, yes P=IxV, but the power ratings in the table were obviously taken from manufacturers' data rather than actual measurements, which is why when any power rating for any of the positive voltages is divided by that voltage, the quotient exactly equals an integer. That would not be a problem if all manufacturers applied identical standards to their specifications, but many computer users have learned that this isn't the case.Anonymous User - Saturday, August 2, 2003 - link
Perhaps you could include a Q-Tec PSU in the next review? They retail here in Sweden at about 60% of the price of corresponding Enermax and other high quality units, so assuming they aren't totally lousy they're very cheap.Anonymous User - Friday, August 1, 2003 - link
I agree with #15. Definitely take a look at the PC Power and Cooling 400w Silencer PSU. I own two of these units and they're very high quality with reasonably low noise.Anonymous User - Friday, August 1, 2003 - link
Enlight power supplies are always being excluded from these PSU comparsions. I have a Enlight 360W PSU and it's very stable and very quiet. Test some Enlight PSUs!Anonymous User - Friday, August 1, 2003 - link
I appreciated the comments concerning AMD users, but what I really need is some sort of guidance on AMD processor speed vs combined power or 3.3V rail current for upgrading older systems. Many older cases have limited power supplies and I'm trying to figure out the fastest processor I can install and still have reliable operation. Example: A 300 watt supply with 25A of 3.3V can only support up to a Athlon 1600+ on an ECS K7S5A Pro or a 350 watt with a combined power of 200W can support up to 2200+. Oh, and forget that old 250 watt power supply altogether. I need something like that... yeah, I know: your mileage may vary, void where prohibited by law, no watts were endangered in the making of this article.....:-)Anonymous User - Friday, August 1, 2003 - link
Next time you guys might want to check out the PC P&C Silencer 400. It's built just as heavily as the Turbo Cool but with a quieter fan.Anonymous User - Friday, August 1, 2003 - link
Hey guys, im sure 1 or 2 of you resistorheads are an ee or will soon be one.. ripple and noise are only part of a good pwr supply.. we need the facts... how many watts do these power supplies really put out. how do they respond with a big load.. will they take an overload.. how well are they protected...thats what i wanna read aboutMIDIman - Friday, August 1, 2003 - link
WOW - excellent review. I'm getting a zalman for my silent box.Nice to see you guys pumping out articles quickly again! Thanks!
idenyit - Friday, August 1, 2003 - link
hey just wondering the allied A400ATX hows that compare with the B400ATX thats offered on newegg? any differences?Anonymous User - Friday, August 1, 2003 - link
#10, doesnt P=IV? The Power and Voltage measurements were given.