2003 Power Supply Roundup Part II: Better Faster Cheaper
by Kristopher Kubicki on July 31, 2003 1:58 PM EST- Posted in
- Cases/Cooling/PSUs
Except for the specifications, the EG651P was very similar to the EG465. It came with the same glossy finish, copper sheathed ATX cable, and rear variable fan controller.
Undoubtedly, Enermax has the best power supply cable management capabilities available. To combat interference, the ATX and +12V cables are copper meshed with rubber sheathing. This copper shielding extends all the way into the power supply housing, where the rails are also shielded in copper. It is no wonder why this power supply is also one of the heaviest.
This is the only other power supply in our review to display the ATX12V 1.2 compliance. For those of you not familiar, this is the published standard that assures stability with Intel and AMD systems. This particular standard makes sure the +3.3V rail is not neglected when increasing the wattage on the +12V rail, but also assures tight specifications on the lesser used -5VSB rail. We can see that the specifications on this unit are not skewed only to the +12V rail, so this unit does make sense for an AMD system builder as well.
Wattages
|
3.3V |
5V |
12V |
-12 |
-5 |
+5vsb |
combined theoretical |
actual combined |
advertised total |
Enermax EG651P-VE FMA 550W |
118.80 |
180.00 |
432.00 |
12.00 |
5.00 |
11.00 |
298.80 |
200.00 |
550.00 |
Specifications alone speak volumes for this power supply. The +12V rail has an advertised rating of 36A, or 432 watts. This puts the EG651 way above any other non-Enermax component. However, since mathematically the power supply can only sustain about 330watts on that rail, the advertised 432 is probably the peak output. Even at 330W, the EG651 still towers over most power supplies.
The EG651P-VE is one of the pricier units in our round up. Most online retailers are carrying this unit for around $135, but with rebates and deals you might get it as low as $120.
We thank MaxPoint for rushing us the two Enermax power supplies to us before the deadline for this article.
70 Comments
View All Comments
Anonymous User - Saturday, August 2, 2003 - link
#11, yes P=IxV, but the power ratings in the table were obviously taken from manufacturers' data rather than actual measurements, which is why when any power rating for any of the positive voltages is divided by that voltage, the quotient exactly equals an integer. That would not be a problem if all manufacturers applied identical standards to their specifications, but many computer users have learned that this isn't the case.Anonymous User - Saturday, August 2, 2003 - link
Perhaps you could include a Q-Tec PSU in the next review? They retail here in Sweden at about 60% of the price of corresponding Enermax and other high quality units, so assuming they aren't totally lousy they're very cheap.Anonymous User - Friday, August 1, 2003 - link
I agree with #15. Definitely take a look at the PC Power and Cooling 400w Silencer PSU. I own two of these units and they're very high quality with reasonably low noise.Anonymous User - Friday, August 1, 2003 - link
Enlight power supplies are always being excluded from these PSU comparsions. I have a Enlight 360W PSU and it's very stable and very quiet. Test some Enlight PSUs!Anonymous User - Friday, August 1, 2003 - link
I appreciated the comments concerning AMD users, but what I really need is some sort of guidance on AMD processor speed vs combined power or 3.3V rail current for upgrading older systems. Many older cases have limited power supplies and I'm trying to figure out the fastest processor I can install and still have reliable operation. Example: A 300 watt supply with 25A of 3.3V can only support up to a Athlon 1600+ on an ECS K7S5A Pro or a 350 watt with a combined power of 200W can support up to 2200+. Oh, and forget that old 250 watt power supply altogether. I need something like that... yeah, I know: your mileage may vary, void where prohibited by law, no watts were endangered in the making of this article.....:-)Anonymous User - Friday, August 1, 2003 - link
Next time you guys might want to check out the PC P&C Silencer 400. It's built just as heavily as the Turbo Cool but with a quieter fan.Anonymous User - Friday, August 1, 2003 - link
Hey guys, im sure 1 or 2 of you resistorheads are an ee or will soon be one.. ripple and noise are only part of a good pwr supply.. we need the facts... how many watts do these power supplies really put out. how do they respond with a big load.. will they take an overload.. how well are they protected...thats what i wanna read aboutMIDIman - Friday, August 1, 2003 - link
WOW - excellent review. I'm getting a zalman for my silent box.Nice to see you guys pumping out articles quickly again! Thanks!
idenyit - Friday, August 1, 2003 - link
hey just wondering the allied A400ATX hows that compare with the B400ATX thats offered on newegg? any differences?Anonymous User - Friday, August 1, 2003 - link
#10, doesnt P=IV? The Power and Voltage measurements were given.