We took the time to put our power supplies under a multimeter to determine the extreme values of each power supply

We came under a little scrutiny in our last review because we used hard drives to perform our “stress testing.”  Well all you EE folks can eat your hearts out because we built our own resistance platform out of junk found around our lab and the local university basement.  After several power supplies and ECS motherboards later, we came up with something capable of putting our power supplies under 300W of load (60W on the +3.3V, 100W on the +5.0V, and 140W on the +12V rail).

Below is a table of the Voltages we recorded while the system was under load. Using a multimeter we measured the power supplies from the ATX cable. The highest and lowest values demonstrated were recorded.

Measured Voltages

 

+3.3V Low

+3.3V High

+5V Low

+5V High

+12V Low

+12V High

Allied AL-A400ATX

3.260

3.280

4.965

5.005

11.780

11.880

Antec TrueControl 550

3.275

3.320

4.970

5.015

11.880

11.990

Antec TruePower 330

3.280

3.315

4.980

5.030

11.920

11.995

Enermax EG465AX-VE FCA 460W

3.295

3.330

4.980

5.040

11.960

12.020

Enermax EG651P-VE FMA 550W

3.300

3.325

4.985

5.045

11.965

12.030

Enhance ENS-0246 460W

3.290

3.320

4.950

5.040

11.895

11.980

Fortron FSP400-60PFN

3.280

3.320

4.985

5.025

11.895

12.000

Kingwin KWI-450WABK

3.300

3.340

4.985

5.040

11.990

12.220

PC Power & Cooling TurboCool 475

3.295

3.310

4.990

5.005

11.990

12.050

Sparkle FSP350-60PN

3.275

3.320

4.980

5.035

11.925

11.995

ThermalTake PurePower 480W

3.280

3.335

4.945

4.995

11.860

11.970

TTGI/SuperFlower 520SS 4Fan

3.300

3.355

5.005

5.080

11.995

12.235

TTGI/SuperFlower 420SS

3.305

3.350

4.990

5.045

11.990

12.225

TTGI/SuperFlower 350SS

3.295

3.365

4.995

5.040

11.995

12.195

TurboLink 420W

3.250

3.295

5.010

5.035

11.790

11.895

Vantec Ion 400W

3.270

3.320

4.925

5.040

11.880

11.940

Vantec Stealth 520W

3.260

3.335

4.925

5.045

11.890

11.945

Zalman ZM400A-APF

3.285

3.320

4.985

5.035

11.895

11.990

Our table confirms the reverse of the previous interference test. Again, the sturdier constructed power supplies ended up performing with the tigheset specifications.  The TurboCool 475 performed incredibly well; even with our high expectations we could not believe the performance. It is our guess that the PC Power & Cooling engineers really know what they are doing.

Interference Results Voltages Cont. (Fan Control Problems)
Comments Locked

70 Comments

View All Comments

  • Anonymous User - Saturday, August 2, 2003 - link

    #11, yes P=IxV, but the power ratings in the table were obviously taken from manufacturers' data rather than actual measurements, which is why when any power rating for any of the positive voltages is divided by that voltage, the quotient exactly equals an integer. That would not be a problem if all manufacturers applied identical standards to their specifications, but many computer users have learned that this isn't the case.
  • Anonymous User - Saturday, August 2, 2003 - link

    Perhaps you could include a Q-Tec PSU in the next review? They retail here in Sweden at about 60% of the price of corresponding Enermax and other high quality units, so assuming they aren't totally lousy they're very cheap.
  • Anonymous User - Friday, August 1, 2003 - link

    I agree with #15. Definitely take a look at the PC Power and Cooling 400w Silencer PSU. I own two of these units and they're very high quality with reasonably low noise.
  • Anonymous User - Friday, August 1, 2003 - link

    Enlight power supplies are always being excluded from these PSU comparsions. I have a Enlight 360W PSU and it's very stable and very quiet. Test some Enlight PSUs!
  • Anonymous User - Friday, August 1, 2003 - link

    I appreciated the comments concerning AMD users, but what I really need is some sort of guidance on AMD processor speed vs combined power or 3.3V rail current for upgrading older systems. Many older cases have limited power supplies and I'm trying to figure out the fastest processor I can install and still have reliable operation. Example: A 300 watt supply with 25A of 3.3V can only support up to a Athlon 1600+ on an ECS K7S5A Pro or a 350 watt with a combined power of 200W can support up to 2200+. Oh, and forget that old 250 watt power supply altogether. I need something like that... yeah, I know: your mileage may vary, void where prohibited by law, no watts were endangered in the making of this article.....:-)
  • Anonymous User - Friday, August 1, 2003 - link

    Next time you guys might want to check out the PC P&C Silencer 400. It's built just as heavily as the Turbo Cool but with a quieter fan.
  • Anonymous User - Friday, August 1, 2003 - link

    Hey guys, im sure 1 or 2 of you resistorheads are an ee or will soon be one.. ripple and noise are only part of a good pwr supply.. we need the facts... how many watts do these power supplies really put out. how do they respond with a big load.. will they take an overload.. how well are they protected...thats what i wanna read about
  • MIDIman - Friday, August 1, 2003 - link

    WOW - excellent review. I'm getting a zalman for my silent box.

    Nice to see you guys pumping out articles quickly again! Thanks!
  • idenyit - Friday, August 1, 2003 - link

    hey just wondering the allied A400ATX hows that compare with the B400ATX thats offered on newegg? any differences?
  • Anonymous User - Friday, August 1, 2003 - link

    #10, doesnt P=IV? The Power and Voltage measurements were given.

Log in

Don't have an account? Sign up now