2003 Power Supply Roundup Part II: Better Faster Cheaper
by Kristopher Kubicki on July 31, 2003 1:58 PM EST- Posted in
- Cases/Cooling/PSUs
Zalman’s 400W power supply is almost identical to Fortron’s 400W power supply. In fact, many of the components are labeled with identical serial numbers. However, this is not a bad thing at all. The other Fortron power supply represented in this cross section are of very good quality, and we will see the performance advantages in the benchmark.
The Zalman 400W APFC power supply abides by the fundamental rule for almost all Zalman products. It’s quiet and it’s constructed well. Of course, we wanted the Zalman version of this power supply to come with an ATX sheath, but we think the advantages in performance have proved worthy enough. The unit also comes with Active PFC, motherboard monitoring and Serial ATA adaptors.
Wattages
|
3.3V |
5V |
12V |
-12 |
-5 |
+5vsb |
combined theoretical |
actual combined |
advertised total |
Zalman ZM400A-APF |
92.40 |
200.00 |
180.00 |
9.60 |
1.50 |
10.00 |
292.40 |
235.00 |
400.00 |
The 235W combined rail is identical to the Fortron unit. Again, this is a respectable range for a 400W power supply, and should perform well for AMD motherboards.
The Zalman 400W is priced very competitively with Sparkle and Fortron’s 400W APFC offerings. Choosing one would essentially be the same as choosing the other. We have seen many online vendors carry the ZM400A for around $70, but if you look hard enough you can sometimes find it around same price as its Fortron counterpart.
70 Comments
View All Comments
Anonymous User - Friday, August 1, 2003 - link
1. No amp measurements were listed, a serious deficiency because without them there is no way to know how well each PS met its amp specs, and many brands are known to fall short.2. No overload testing results for shorts, excessive power draw, excessive temperature.
3. Ripple is not just slow voltage variation also short term variation, such as for each AC cycle (60 Hz for the incoming AC, about 60,000 Hz for the output DC). I would have liked to see how the latter correlated with the memory noise test results.
4. I hope you were careful when you tested the PS heatsink temperatures because some heatsinks are live with high voltage.
Anonymous User - Thursday, July 31, 2003 - link
Well for the observent people who can differentiate between orange and blue, its not an issue. Also waiting a full second before clicking it reveals the location on both the bottom left and the mouse cursor. but i can see how it does get annoying.Anonymous User - Thursday, July 31, 2003 - link
yeah those in page advertisements are REALLY annoying...those have got to go. i never know when i'm going to link to another anandtech article or to an ad...i guess that's the point but it's still unacceptableAnonymous User - Thursday, July 31, 2003 - link
I would like to see the review include a Heroichi Electronic power supply, I hear they are very good but I haven't used one.Anonymous User - Thursday, July 31, 2003 - link
Some of your "In Page Advertising" links seem to be missing closing links tags or something so that it results in having a <link> in the middle or end of a sentence. Ex. "We had a lot of troubles with Vantec’s last power supply, the Stealth. We found an error in the production label<link>, which quickly led to a change in all the labeling on all Stealth power supplies."KristopherKubicki - Thursday, July 31, 2003 - link
#3 and #4, thank you for spotting these errors. I have updated and fixed them.Cheers,
Kristopher
Anonymous User - Thursday, July 31, 2003 - link
I hope the ripple for the PC Power & Cooling 3V wasn't 2.295.. Possibly 3.296??? 1 volt drop is unacceptable.Anonymous User - Thursday, July 31, 2003 - link
The REAL price of the pc power&coolinghttp://www.directron.com/pcpower.htmlAnonymous User - Thursday, July 31, 2003 - link
a little more content per page in some cases would be nice too......but good to see content on the site at all...and seemingly more regularly too...
Anonymous User - Thursday, July 31, 2003 - link
woah guys, the tables need some work...