Dell UltraSharp 2001FP Preview: Gaming LCDs for the Masses
by Kristopher Kubicki on November 10, 2003 12:36 AM EST- Posted in
- Displays
By Popular request...
Here are a few quick looks at some demanding full screen applications (except Solitaire, which is windowed).The Matrix Reloaded and The Matrix - As with our previous benchmarks, these are not spectacular movies to test colors subjectively. However, as far as high motion video, both movies were quite acceptable on the 2001FP. Colors tended to be a little bluer than normal, and as in the frame below, it's obvious that darks are not dark as they should be. The slight problem with backlight alignment that we mentioned earlier is over exaggerated by the still camera (upper right).
Click to enlarge.
Morrowind - Our synopsis of this 1600x1200 LCD wouldn't be complete without some games running at 1600x1200. Although the screenshot cannot tell you much, zooming in reveals that this game is showing up the way it was meant on the monitor.
Click to enlarge.
Firewarrior - Another game we decided to load up at 1600x1200. Firewarrior does a decent job of displaying lots of different extreme hues at the same time, and from the 1600x1200 game, we did not notice anything out of the ordinary.
Click to enlarge.
Max Payne and Max Payne 2 - Response time is definitely acceptable (although it is amplified by still images). We noticed no immediate blurring, but being that Max Payne lacks color depth, this is not the best game on which to judge response time. Darks were a little bit too bright, but acceptable.
Click to enlarge.
Click to enlarge.
Halo - We had some mixed feelings while playing Halo. Granted, we spend a lot of time playing Halo on DLP screens via component input (XBox of course). There is a noticeable difference between playing Halo on a CRT and on an LCD. For probably 2/3 of the games we play, pixel blur is not noticeable; but on a game like Halo, it is. We suspect this is due to the larger amounts of gray-to-gray (and gray-to-black) transitions. Below, you can see where our camera captured some blur.
Click to enlarge.
Solitaire - Again noticeable, but you can see the difference below. On the left is a Dell 1702FP LCD; on the right is the 2001FP. Notice the challenged response time on the 1702FP. The 2001FP seems to be displaying fewer copies of the cursor, even though we are using a program to pull the cursor from left to right at the same speed in both images.
|
|
Facebook
Twitter
RSS
53 Comments
View All Comments
airjrdn - Friday, April 9, 2004 - link
I'm getting conflicting feelings about this monitor as well. I guess I'm summing it up to some people being pickier than others.Is there ANY ghosting at all in UT2K3/4?
labelreader - Saturday, April 3, 2004 - link
Yep. I have one of these monitors at work and that's exactly what I did; the "insulator" actually helps with the movement problems when it's on top of the cable hook because it gives you some slack in the cable between the hook and the display. By the way, there are no flaws on mine or my coworkers' displays...I want one for home!HermosaBeach - Saturday, February 7, 2004 - link
Hi, I own an ATI 9800 Pro and a Samsung 210T (Digital 1600x1200 via DVI).The ATI 9800 Pro defintely supports 1600x1200 via DVI (digital). Not only does it support it, but I only play games at 1600x1200, I never reduce the resolution, unless the game does not allow this resolution. Furthermore, it most games, I turn 6xAA and 16xAF on as well. The odd game is too slow (frames per second are too slow) and I reduce the AA and AF, but I never reduce the resolution.
You want to use the LCD in its native resolution when-ever possible.
Dave
StripPokeHer - Saturday, December 27, 2003 - link
Owners of 2001FP:Do any of you guys have the same problem with the "grainyness" of this screen.
Here are different posts from others that I have found:
http://forums.us.dell.com/supportforums/board/mess...
http://forums.us.dell.com/supportforums/board/mess...
http://forums.us.dell.com/supportforums/board/mess...
I have the same problem. My eyes are used to LCD screens because I use my laptop for half of the day at least (1400x1040 14") I have also used both the 1800FP and 1900FP without issue. But this thing is bugging the sh*t out of me, and i will probably send it back. Waited a long time to get this (primarily based on this review), and the quality of this monitor turns out to be like crap.
Anyone seen/know what the cause of this is? FYI: I'm running a 9800XT 256MB on DVI @ 1600x1200. Running latest cats + the monitor driver provided by dell. I had the same problem on both DVI and Analog, but truth be told, they were both ATI controllers (9800XT & a Radeon 9000)
Any input to those who are owners are appreciated! :) TIA
MorbentFell - Wednesday, December 24, 2003 - link
Hmm... will check that out. Thnx for the reply.Singletary - Tuesday, December 23, 2003 - link
Folks on the Dell Community forum are saying that the screen is LG Phillips, but the monitor is assembled/manufactured by BenQ.MorbentFell - Saturday, December 20, 2003 - link
I just received this monitor a couple days ago. I've been having some strange problems with green & red horizontal diagnol pixel lines that resolve when I turn the power off and on again. As I was looking on the back, one thing I noticed is that it says 'BenQ Corporation'. I may be showing my ignorance here, but I was under the impression these are LG Phillips screens. Are they the same thing? If not, are the specs/quality equivalent? Any input would be appreciated.Singletary - Thursday, December 18, 2003 - link
I like the monitor very much, but don't think I have it adjusted correctly. I know room lighting is different, but where are you folks setting the contrast and brightness? Anyone found a profile to ensure color correctness? Please share Kristopher!Spirex - Wednesday, December 17, 2003 - link
FYI...go to Dell Business to order, they are currently selling it for $749.00 plus tax. Mine came out to a total of $794.00 to ship to NJ. I am not sure how long this promotion will last.Spirex - Wednesday, December 17, 2003 - link
I just got mine yesterday. Hooked it up via the DVI port to my ATI 9700 pro AIW. This thing is kicks my previous monitor to the curb(Viewsonic p813 21"). At first, I was having difficulty reading text because I wasn't used to the sharpness @ 1600x1200. I had also played in a UT2k3 ladder match that night. To sum it up....AMAZING. No ghosting at 1024x768-60hz full screen. The image quality was as good or better than my CRT. I didn't lose any skill points with this monitor. Maybe I try some real work on it today.