Maxtor's MaXLine III 250GB: Bringing 16MB Buffers and NCQ to Hard Drives

Native Command Queuing

Hard drives are the slowest things in your PC and they are such mostly because they are the only component in your PC that still relies heavily on mechanics for its normal operation. That being said, there are definite ways of improving disk performance by optimizing the electronics that augment the mechanical functions of a hard drive.

Hard drives work like this: they receive read/write requests from the chipset's I/O controller (e.g. Intel's ICH6) that are then buffered by the disk's on-board memory and carried out by the disk's on-board controller, making the heads move to the correct platter and the right place on the platter to read or write the necessary data. The hard drive is, in fact, a very obedient device; it does exactly what it's told to do, which is a bit unfortunate. Here's why:

It is the hard drive, not the chipset's controller, not the CPU and not the OS that knows where all of the data is laid out across its various platters. So, when it receives requests for data, the requests are not always organized in the best manner for the hard disk to read them. They are organized in the order in which they are dispatched by the chipset's I/O controller.

Native Command Queuing is a technology that allows the hard drive to reorder dynamically its requests according to the location of the requests on a platter. It's like this - say you had to go to the grocery store and the drug store next to it, the mall and then back to the grocery store for something else. Doing it in that order would not make sense; you'd be wasting time and money. You would naturally re-order your errands to grocery store, grocery store, drug store and then the mall in order to improve efficiency. Native Command Queuing does just that for disk accesses.

For most desktop applications, NCQ isn't necessary. Desktop applications are mostly sequential in nature and exhibit a high degree of spatial locality. What this means is that most disk accesses for desktop systems occur around the same basic areas on a platter. Applications store all of their data around the same location on your disk as do games, so loading either one doesn't require many random accesses across the platter - reducing the need for NCQ. Instead, we see that most desktop applications benefit much more from higher platter densities (more data stored in the same physical area on a platter) and larger buffers to improve sequential read/write performance. This is the reason why Western Digital's 10,000 RPM Raptor can barely outperform the best 7200 RPM drives today.

Times are changing however, and while a single desktop application may be sequential in nature, running two different desktop applications simultaneously changes the dynamics considerably. With Hyper Threading and multi core processors being the thing of the future, we can expect desktop hard disk access patterns to begin to slightly resemble those of servers - with more random accesses. It is with these true multitasking and multithreading environments that technologies such as NCQ can improve performance.