Western Digital's Raptors in RAID-0: Are two drives better than one?
by Anand Lal Shimpi on July 1, 2004 12:00 PM EST- Posted in
- Storage
Game Loading Performance
For our game loading tests, we used two games: Far Cry and Unreal Tournament 2004. Both games were installed, in full, to the hard drive. We then used no-CD patches to prevent any accessing of the CD/DVD drive to skew the loading process. Both games were installed to a clean drive without anything else present on the drive (the OS is located on a separate drive).Our Far Cry test consists of starting a campaign with the default difficulty level, hitting escape to skip the introductory movie and beginning the stop watch timer at first sight of the loading screen. The stop watch timer is stopped as soon as the loading screen disappears. The test is repeated three times with the final score reported being an average of the three. In order to avoid the effects of caching, we reboot between runs. All times are reported in seconds; lower scores, obviously, being better.
We were hoping to see some sort of performance increase in the game loading tests, but the RAID array didn't give us that. While the scores put the RAID-0 array slightly slower than the single drive Raptor II, you should also remember that these scores are timed by hand and thus, we're dealing within normal variations in the "benchmark".
Our Unreal Tournament 2004 test uses the full version of the game and leaves all settings on defaults. After launching the game, we select Instant Action from the menu, choose Assault mode and select the Robot Factory level. The stop watch timer is started right after the Play button is clicked, and stopped when the loading screen disappears. The test is repeated three times with the final score reported being an average of the three. In order to avoid the effects of caching, we reboot between runs. All times are reported in seconds; lower scores, obviously, being better.
In Unreal Tournament, we're left with exactly no performance improvement, thanks to RAID-0.
Facebook
Twitter
RSS
127 Comments
View All Comments
RyanVM - Friday, July 2, 2004 - link
Let's not forget the target audience of this article: home users. The point of this article was that a two disk RAID0 array has little to no benefit whatsoever for the home user and/or gamer, which is exactly the primary consumer who'd make use of Intel's onboard RAID controller.Power users with multiple-disk RAID setups would be VERY unlikely to use an onboard RAID controller, opting instead for a dedicated RAID controller with onboard cache, processor offloading, etc.
And as others said, the controller makes very little difference in a two-disk RAID array. It's only with multiple disks (4+) that the controller starts showing its importance by managing read/write requests, caching data, etc.
In summary, for those of you who were expecting a full blown RAID review, go over to Storage Review where they specialize in those types of tests. This article was simply showing that onboard RAID is really quite useless for its target audience.
Jalf - Friday, July 2, 2004 - link
Funny how quick people are to dismiss an article the moment it doesn't confirm what they already believed...I might be the only one here, but I'm not really surprised by this article in general.
RAID has its place, yes, but not as a desktop system.
Yes, bandwidth goes way up, but so does latency. Instead of locating a file on one drive, you have to locate it on two drives, before you can even start the transfer. With sequential transfers, RAID is obviously faster, but with multiple smaller accesses, it will be slower. There's no magic in it, no faked results, and no incompetent and biased authors of that article.
It's simple, really. Locating data on one disk is faster than locating it on two disks simultaneously.
That is no matter which controller you use. Yes, a faster controller might mean a smaller performance penalty, but doesn't change the fact.
The most expensive part of I/O is the seek time. The actual transfer is fast by comparison.
The problem is that RAID aids the already acceptable transfer speed, but slows down seek time, which was already a bottleneck.
So yes, it can improve performance, but only if you have large sequential reads/writes, where you don't need to waste time seeking, and where the faster transfer really becomes useful.
In other words, *not* on normal desktop systems, and not on normal gaming systems.
masher - Friday, July 2, 2004 - link
> "I'd like to get to the truth about RAID0 for> desktop users like myself."
RAID0 really isn't significantly faster for most users and apps. Its not due to the reason KF states though-- HD performance is still very important to most apps.
But a RAID array doesn't increase performance across the board. Bandwidth goes up sharply...but latency rises as well. The only apps you'll see large gains in are ones that favor bandwidth much more than latency-- such as streaming huge files in a diskbound mode.
The Intel onboard raid controller isn't the best one out there. You can buy a dedicated card and scrape another couple percentage points out. A small gain for the dollars invested.
TheCimmerian - Friday, July 2, 2004 - link
This is my first post in this forum.Let me start by saying that anandtech.com appears to be a great place to get news, and I've enjoyed the articles so far.
While I agree that the "Raptor RAID0" article has some issues, I fail to see how so many of you can dismiss the results, and even the conclusions.
Anand has presented a real-world test of a commonly used RAID0 setup against commonly accepted benchmarks.
Frankly, I'm astounded by the number of "I don't care what his results show, my RAID0 setup is faster" comments. If your array IS faster, please post some evidence! There is way too much anecdotal assertion on this thread for my taste.
Honestly, I'm poised to purchase a couple Raptors for a desktopo RAID0 setup--based on the general yahoo about the performance benefits of RAID0. I was suprised and concerned to read this article, and the similar articles linked-to in this thread. As someone on the verge of dropping several hundred dollars for the supposed increased performance, I'd like to get to the truth about RAID0 for desktop users like myself.
I appreciate KF's thoughts on "why" RAID0 doesn't make a difference, and I'd like to hear more opinions and thoughts--especially opinions backed up by some kind of evidence!
Anand pretty much (except for the game tests) confined his test to synthetic benchmarks. Anyone have any results with actual applications and/or files?
Specifically, I plan(ned?) on using a dual 74Gb Raptor RAID0 array as a scratch/capture disk for DV work. DV files are huge (multiple Gb), and disk speed is important for smooth and error-free capture from a DV camera. Any thoughts?
Thanks for the dialog.
masher - Friday, July 2, 2004 - link
> "I can tell you for a fact that my 8 disk RAID> 10 array, with 15k 73GB Cheetahs, running on a
> LSI 320-2, installed in a 133MHZ PCI-X slot..."
Is it just me, or does Denial sound like he's trying to score chicks by bragging about the size of his array?
Oh, and BTW Denial...the servers your employer use don't count. You're either a liar for claiming you run this setup in your personal desktop...or an idiot if you're telling the truth.
Zar0n - Friday, July 2, 2004 - link
Nice article but very incomplete.Next time please include chip7 from via & nvidia
And more modern drives are available like Seagate 200GB.
Also include tests with raid 1
No SCSI drives, keep it real, most ppl have SATA or ATA drives.
pookie69 - Friday, July 2, 2004 - link
There have been A LOT of issues/concerns raised by various ppl here regarding things like benches and configuration setups etc that were left out in the article. I think it would be great if there was a follow-up article to this one in which these issues were addressed and previous things further explained.>>> indeed, if ALL :) the issues were addressed in the said follow-up article, it may end-up being the most comprehensive RAID report/review ever!
Anyways, something for the guys at AnandTech to think about - i think its hard to overlook the fact that alotta ppl are feeling quite a bit of discontent at the way this article hit upon its (pre-concluded :) ) conclusion.
Denial - Friday, July 2, 2004 - link
"Then programmers (in some cases) will write their programs differently amd the extra speed of RAID 0 will show more in real-life benchmarks."Let me get this straight, you think apps today (I assume you mean desktop/office apps) aren't dependent enough on disk I/O, and should start to be written so they are more I/O bound?
I hope you don't mind, but I'm going to put this in the old sig library for use someday. :)
KF - Friday, July 2, 2004 - link
Denial: You are in denial. The results of Anand's simple-to-understand test are the same as the results that have been reported in overwhelmingly mind-numbingly-detailed reviews at specialized storage sites. This just happens to be about the IMPORTANT latest incarnation, which will no doubt put RAID capability on 90% of new computers, once the Intel production machine is rolling. Until Pariah opined, I wondered if I was the only one that understood those reviews, the way people seem to tout RAID 0 so relentlessly.Maybe this will be simple to understand: The authors of programs know what a slug their programs would be if they wrote them in such a way as to depend on the slowest link in the chain; namely the HD. Therefore HD accesses are avoided at all costs, and everything accessed is cached (in memory.) The OS (Windows) caches everything out-the-whazoo as well. In other words: all algorithms are selected to preserve locality. Therefore HD speed only shows up during intitialization and where there is no way to arrange locality. Therefore real-life benchmrks have a small dependence on HD speed.
Since HD I/O is interrupt driven, and transfers are DMA, a program does not have to just sit and wait until the I/O is performed. It can do useful work concurrently provided the I/O algorithms look-ahead. Then the data will be there (most of the time) before it is needed.
As for why the loading of games does not show a RAID 0 boost, I can only guess that they are doing a lot more than just loading HD data into memory. Possibly most of the HD I/O was done before the point that timing was done, and the slowness at that point is due to other operations. Pre-calculating known physics? Buffering major scenery changes?
I still think people could get a feeling of extra speed during times when the HD IS loading. It may only be a tiny part of the whole time a program is run, but you could notice it during that time.
Furthermore, if the past is a guide, every new capability that becomes commonplace gradually is made more and more use of, especially where Intel is concerned. (AGP, 2xAGP, USB, DMA66, SSE.) So Intel putting RAID 0 in its chipset means RAID 0 will be used more and more. Then programmers (in some cases) will write their programs differently amd the extra speed of RAID 0 will show more in real-life benchmarks. Before that comes about, people will correctly warn that the extra money buys you very little. Fortunately for the rest of us, there are a few people willing to pay for that extra bit, which gets the ball rolling.
Pumpkinierre - Friday, July 2, 2004 - link
#45,#46 Generally the reviews I've seen on RAID1 have the read rates equal or a little bit more than a single drive while RAID0 shows 30%+ improvement. Why? I dont know. To me, in the read part of the deal, it should be the same in Raid 0 or 1.With my suggestion of virtual striping, I also suggested variable stripe size in a previous post (not possible in Raid0 but possible in Raid1 because the stripes are virtual). Here a smaller stripe size could be used for smaller data size requests and a larger stripe for bigger files or sequential data requests. This would speed up reads significantly and give a net advantage over Raid0 which is limited to one stripe size at inception. The controller on request for a particular data file would optimise the size of the stripe based on the request. For desktops where data throughput can range from the few k to the gigs, it would be perfect. This seems possible to me but I have'nt heard anyone implement it.