Western Digital's Raptors in RAID-0: Are two drives better than one?
by Anand Lal Shimpi on July 1, 2004 12:00 PM EST- Posted in
- Storage
Game Loading Performance
For our game loading tests, we used two games: Far Cry and Unreal Tournament 2004. Both games were installed, in full, to the hard drive. We then used no-CD patches to prevent any accessing of the CD/DVD drive to skew the loading process. Both games were installed to a clean drive without anything else present on the drive (the OS is located on a separate drive).Our Far Cry test consists of starting a campaign with the default difficulty level, hitting escape to skip the introductory movie and beginning the stop watch timer at first sight of the loading screen. The stop watch timer is stopped as soon as the loading screen disappears. The test is repeated three times with the final score reported being an average of the three. In order to avoid the effects of caching, we reboot between runs. All times are reported in seconds; lower scores, obviously, being better.
We were hoping to see some sort of performance increase in the game loading tests, but the RAID array didn't give us that. While the scores put the RAID-0 array slightly slower than the single drive Raptor II, you should also remember that these scores are timed by hand and thus, we're dealing within normal variations in the "benchmark".
Our Unreal Tournament 2004 test uses the full version of the game and leaves all settings on defaults. After launching the game, we select Instant Action from the menu, choose Assault mode and select the Robot Factory level. The stop watch timer is started right after the Play button is clicked, and stopped when the loading screen disappears. The test is repeated three times with the final score reported being an average of the three. In order to avoid the effects of caching, we reboot between runs. All times are reported in seconds; lower scores, obviously, being better.
In Unreal Tournament, we're left with exactly no performance improvement, thanks to RAID-0.
Facebook
Twitter
RSS
127 Comments
View All Comments
Pariah - Friday, July 2, 2004 - link
If you look way back at comment #37 you will see my last paragraph is basically exactly what you said in your last paragraph. I agree completely that the article stunk, and that basically all the storage related articles on this site throughout its history have stunk. I just think that your nitpicking of his usage of the word RAID in the conclusion was one of the least important problems in the article, as anyone with half a brain knew what he was talking about when he said that, regardless of whether it was a valid point or not.Denial - Friday, July 2, 2004 - link
As you can see by what i wrote above, I agree with you. What he meant and what he said are different things though. The fact that he left out too much of the systems configuration in order for us to see if it was configured properly means that the test cannot be replicated and is therfore useless. Whatever you think regarding IDE RAID 0, which I have no experience with, you cannot dispute the fact that leaving out critical configuration settings is a no-no for a review such as this. When he runs those gaming tests for one of those new overpriced video cards, he invludes quite a bit more details in the review, yes? Suppose he didn't say what resolution the game was run at, AA on or off, filtering level, etc. Would you be able to verify his results? No.Why does he spend so much time and put so much detail into a review for items as "important" as a 3d card, then completely blow it on this review? I don't have an answer to that, do you? My assumption is that he is not well versed in modern storage technologies and how the file system and many other details play a major role in overall performance, in which case he should have had somebody else perform the tests and write the article, as he does with many of the other articles on the site.
Pariah - Friday, July 2, 2004 - link
Denial, you need some help in determining "target audience." 99% of home users using RAID or thinking about it are likely thinkinb about a 2 drive RAID 0 array. Those 99% of users are who this article is targetted at. And when he says RAID in his conclusion, the setup he tested (2 drive RAID 0), is what he means.If you are thinking about going with something more complicated/advanced, then this article was NOT for you.
Denial - Friday, July 2, 2004 - link
#50, did you not read the article?"If you haven't gotten the hint by now, we'll spell it out for you: there is no place, and no need for a RAID-0 array on a desktop computer. The real world performance increases are negligible at best and the reduction in reliability, thanks to a halving of the mean time between failure, makes RAID-0 far from worth it on the desktop."
This statement is so far fetched it is rediculous. This might be applicable to Raptors on an Intel onboard garbage RAID controller, but the above is a general statement. Maybe if it was changed to
"If you haven't gotten the hint by now, we'll spell it out for you: there is no place, and no need for an ATA RAID-0 array on a desktop computer using an Intel onboard RAID controller."
Written this way his conclusion might be correct, but the way he wrote, it's flat out WRONG.
Pariah - Thursday, July 1, 2004 - link
#48, your post was even more worthless than Anand's article. At least Anand's article had a setup that was remotely applicable to what a user he was targetting with the article would have.Despite what numerous people seem to think in the comments, for a 2 drive ATA RAID 0 array, the controller you use is about as irrelevant an issue as there is. $500 card, free onboard, hardware, software, me using a piece of notebook paper and crayons to calculate drive assignments for data will not make any noteworthy difference in performance.
Denial - Thursday, July 1, 2004 - link
The above comments about stripe size are true as well. Depending on the app, a 64k array stripe matched with a 64k stripe in NTFS will produce much different results that the default 4k(?) that windoze uses on NTFS partitions. We're talking a HUGE *HUGE* **HUGE** difference in performance here. HUGE!!!! I've never used one of those onboard raid solutions, do they even allow the option of setting the stripe size? I'd wouldn't be surprised if they didn't which would make this review even that much more useless.Denial - Thursday, July 1, 2004 - link
What kind of scientific testing was this? ALL RAID 0 is useless because an Intel onboard RAID solution sucks? Why did Anand waste his time on this?I can tell you for a fact that my 8 disk RAID 10 array, with 15k 73GB Cheetahs, running on a LSI 320-2, installed in a 133MHZ PCI-X slot on my dual Xeon 7505 motherboard (Vero) is just a *tad* faster than a single drive setup. ;)
Anand must be on crack making a blanket statement like that. Is this the best he can gve us after a few years of college? What a sorry article.
Zebo - Thursday, July 1, 2004 - link
#1 that's called placebo effect! Same goes for any other "feels" faster hardware such as the A64. The user spent the money, expecting a return, and it gave a false positive.I have been droning on about how raid 0 is worthless waste of money since I read this:
http://faq.storagereview.com/tiki-index.php?page=S...
And thanks to anands wonderful work we have coorberation.
TrogdorJW - Thursday, July 1, 2004 - link
As others are stating, RAID 1 on any *decent* RAID controller should have faster read rates. www.StorageReview.com has shown this in a recent article. So the statement "We won't be benchmarking RAID-1 here because, for the most part, there's no performance increase or decrease" while true in part (you didn't perform the benchmarks), was a bad decision, as performance should differ from a single drive. Of course, for single-user usage, RAID 1 would be even less useful than RAID 0 - except for adding redundancy.MajorKong - Thursday, July 1, 2004 - link
It's a shame that a RAID 1 array with the same Raptor II (and 7200 RPM drives) wasn't benchmarked. The read performance of RAID 1 can be as good as that of RAID 0 on a good controller. The only case where that's not true is if a lot of writing, which is slower than either RAID 0 or a single disk is being done to the array while reads are in progress.