Socket 939 Roundup: Battle at the Top
by Wesley Fink on July 30, 2004 8:00 AM EST- Posted in
- Motherboards
MSI K8N Neo2 Platinum: Overclocking and Stress Testing
FSB Overclocking Results
| Front Side Bus Overclocking Testbed | ||
| Processor: | Athlon 64 FX53 Socket 939 2.4GHz |
|
| CPU Voltage: | 1.5V (default) | |
| Cooling: | Thermaltake Silent Boost K8 | |
| Power Supply: | Antec TruePower 430W | |
| Maximum OC: (Standard Ratios) |
204FSBx13 2652MHz (+10.5%) |
|
| Maximum FSB: (Lower Ratio) |
290FSB x 9 (2610) at 1:1 Memory (+10%) | |
The K8N Neo2 allowed our DDR550 memory to reach the highest 1:1 performance that we have tested on any motherboard - P4 or A64. 290 Frequency (1160 FSB/HT) was the limit of our memory and the K8N reached it rather easily. By reducing the memory ratio a bit, we were right at the board limit of 300, and we could likely reach even higher OC levels with a wider range of frequency choices. The MSI K8N Neo2 was clearly the best overclocker of this roundup.
Memory Stress Test Results:
The memory stress test simply checks the ability of the K8N Neo2 to operate at its officially supported memory frequency (400MHz DDR), at the best performing memory timings that our Mushkin PC3500 Level 2 or OCZ PC3500 Platinum Ltd Modules will support. Memory stress testing was conducted by running RAM at 400MHz with 2 DIMM slots filled.| Stable DDR400 Timings - 2 DIMMs (2/4 DIMMs - 1 Dual-Channel Bank) |
|
| Clock Speed: | 200MHz |
| Timing Mode: | N/A |
| CAS Latency: | 2.0 |
| Bank Interleave: | N/A |
| RAS to CAS Delay: | 2T |
| RAS Precharge: | 10T* |
| Precharge Delay: | 2T |
| Command Rate: | 1T |
Like the other 939 motherboards in this roundup, the K8N Neo2 was completely stable with 2 DIMMs at the best performing settings of 2-2-2-10 at default speed and 2.6V default voltage. While a full memory comparison of the nVidia and VIA chipsets is beyond the scope of this roundup, we did run several SiSoft Sandra 2004 SP2 runs of the memory test module. At default settings, and the aggressive 2-2-2-10 timings on the FX53, the nF3-250 Ultra showed memory bandwidth in the 6100 range for FPU and Float. The same test on the VIA K8T800 PRO boards showed memory bandwidth in the 6000 range. Performance of both chipsets at the 1T setting was very similar. 2T Command Rates, with everything else the same, generated bandwidths of 4900 to 5000Mb/second.
Filling all four available memory slots is more strenuous on the memory subsystem than testing 2 DIMMs on a motherboard.
| Stable DDR400 Timings - 4 DIMMs (4/4 DIMMs - 2 Dual-Channel Banks) |
|
| Clock Speed: | 200MHz |
| Timing Mode: | N/A |
| CAS Latency: | 2.0 |
| Bank Interleave: | N/A |
| RAS to CAS Delay: | 2T |
| RAS Precharge: | 10T* |
| Precharge Delay: | 2T |
| Command Rate: | 2T |
The MSI K8N Neo2 was able to run with all 4 DIMM slots at the same aggressive 2-2-2-10 settings used for 2 DIMMs. However, as we have seen on the other 939 boards running all 4 DIMMs, Command Rate must be reduced to 2T when filling both Dual Channels.
Facebook
Twitter
RSS
83 Comments
View All Comments
bigtoe33 - Tuesday, July 20, 2004 - link
Asus USA did block sales of the A8V but some US resellers decided to go it alone with imported european boards.While it does p1$$ me off that there were still boards in europe not upto scratch you have to commend Asus USA for blocking sales and trying to at least look after some customers...they are also honouring RMA's also.
So #1 it does show some resarch was needed before you bought your board as i tried to let everyone know that the first boards available were not PCI lock fixed although any of them do work with the lock and work VERY well.
Wesley Fink - Tuesday, July 20, 2004 - link
#1 - Asus never advertised or listed an AGP/PCI lock as a feature on the original release of the A8V Deluxe. That is the only reason we have not yet reviewed this board. While we did have a sample with a working lock, we have stated in every comment about the A8V in memory reviews and articles that Asus had not yet released a production board with this feature, but that they planned to implement this feature in the future.It is also our understanding that the US office even held release of the board to the US market, but many huge on-line vendors direct imported this board or brought it in from European sources. Since we were working with Asus, we know they tried very hard to hold release of this baord until they could work through issues of adding a stable PCI/AGP lock to the A8V.
It is our understanding than Revision 2.0 will implement an AGP/PCI lock, but we have not yet seen the production board, which we expect this week. We will confirm the new feature when the board is received.
We tried to caution readers about the AGP/PCI lock on early VIA boards as loudly as we could. In fact we got a lot of flak from manufacturers and VIA about our articles on the problems with the AGP/PCI lock on early VIA boards.
Asus did not even list the AGP/PCI lock as an option on the AV8 Deluxe. Our suggestion is to contact Asus, but you got the features Asus advertised and listed for this board.
shamgar03 - Tuesday, July 20, 2004 - link
I bought a ASUS A8V like 3 weeks ago, but in the article it says they are re-releasing it or something, does anyone know if they are going to patch that with bios updates, or did I just get the shaft?