Burn Tests DVD RAM/DL Media

MKM DVDR+9



Click to enlarge.




Click to enlarge.


Surprisingly, the Pioneer wrote to the MKM +R9 media at a constant 4x at each layer, even though it was rated at 2.4x.




Click to enlarge.



The read back on the Plextor drive shows a perfect burn at both layers.

Ritek DVD+R9




Click to enlarge.




Click to enlarge.


The Pioneer drive seemed to perform fine on the Ritek brand +R9 media, but when trying to read it back, it ran into a problem with the second layer. We retried reading the disc twice to no avail.


Even the Plextor could not read the second layer.

Burn Tests DVD-R Media Burn Tests DVD+/-RW Media
Comments Locked

36 Comments

View All Comments

  • KristopherKubicki - Tuesday, August 31, 2004 - link

    Degrador, fixed, thanks.

    Kristopher
  • Degrador - Tuesday, August 31, 2004 - link

    Bitsetting basically describes what type of disc it is (only matters for DVD+R(W) and DL discs). Having a drive able to let you set the bitsetting means you can write discs that seem to be DVD-ROM discs not writables, and so old dvd-players can handle them better.

    Another thing I noticed in the article, the image shows the Ritek R03 discs burnt at only 4X on the Pioneer, yet you say "Even at that ambitious burn ..." and "the Pioneer wins this bout both in speed and write quality". Wrong image link perhaps?
  • KristopherKubicki - Tuesday, August 31, 2004 - link

    saechaka: someone said a hacked 3500A firmware supports bitsetting. I think its a pretty moot issue nowadays but some people find it really important.

    Kristopher
  • saechaka - Tuesday, August 31, 2004 - link

    what's the significance of this bitsetting? and will the 3500a be able to utilize that feature? thanks
  • Degrador - Tuesday, August 31, 2004 - link

    Under the features table, you have the drive listed as writing DVD-RAM at 2X. This drive actually doesn't support writing DVD-RAM, only reading.

    Perhaps another thing of note is that the retail version has better noise management / control than the OEM version.

    Also, is there any chance of doing some benchmarks with the newly released 1.10 firmware?

    Thanks
  • Budman - Tuesday, August 31, 2004 - link

    Pioneer DVD burners Rule!!

Log in

Don't have an account? Sign up now