Intel's Long Awaited BTX Form Factor
by Purav Sanghani on November 15, 2004 5:31 AM EST- Posted in
- Cases/Cooling/PSUs
Examining BTX cont'd
The D915GMH is essentially a microBTX version of our D915GUX motherboard with a few functional differences on top of the obvious BTX design. When we first laid eyes on the D915GMH the first thing we noticed was the arrangement of the CPU socket, Northbridge, and Southbridge. The CPU socket is placed at the front of the motherboard with the Northbridge behind it slightly to the left and the Southbridge behind the Northbridge directly in line with the CPU socket. Each is positioned on a diagonal which we assume will improve air flow around all three chips. Since these components are three of the hottest running components in a PC it made sense to position them in line from front to back and we expect fans to be placed in that same linear arrangement.A design that revolves so much around irregularly placed components was slightly unusual for us to see. Although software dictates the exact routing of all the traces from component to component, its very obvious that some very complicated math went into assuring each bridge and component was placed correctly. The fact that almost nothing seems to be at a right angle is a little overwhelming at first.
The IDE and Floppy ribbon headers were separated on the board. We found this to be inefficient, especially for the floppy drive, since they are on opposite sides of the system. Though not as important nowadays since SATA drives are moving into mainstream PCs, those who would like to use floppy drives are left with only the option of using a lengthy rounded cable. Since the AOpen/Intel combination we received today looks more like an OEM design than something we would typically buy and assemble from NewEgg, problems with the floppy cable placement shouldn't be a huge issue.
Click to Enlarge
There are 4 DDR memory sockets which are placed at the far left edge of the board. Keep in mind our D915GMH runs on DDR2, but other than design layout that is the only major difference between our microATX and microBTX motherboards.
Click to Enlarge
The PCIe x16 slot is positioned about 3 inches from the rightmost edge of the D915GMH. Since the AOpen B300 is a half height case a riser card is included for the PCIe x16 slot. This allows the VGA card to be mounted towards the center of the motherboard to keep it inline with the CPU and chipset.
Facebook
Twitter
RSS
77 Comments
View All Comments
HardwareD00d - Monday, November 15, 2004 - link
Instead of spending all the money to research BTX, Intel should have just made watercooling standard on the Prescott CPU. Apple could have said they stole the idea from them like everything else ;)Omega215D - Monday, November 15, 2004 - link
It looks like Intel needs all the cooling it can get. I found an interesting article at Toms Hardware and here;s the closer about its heat problem "So, should a vendor release a product that is only able to run at its maximum performance under special circumstances? The fastest processors certainly are very exclusive devices, but that should not cause more troubles than necessary. The customer wants products that simply work! Think about that before releasing faster products, Intel." All I can say is wow, because I can remember my P3 866 didn't need all that cooling though now I moved on to AMD.HardwareD00d - Monday, November 15, 2004 - link
It sounds like you can essentially get the same thermal performance from an ATX case by adding 1 additional case fan.At least Intel has decided not to push this new form factor down peoples throats. Honestly, that's what I figured they'd try to do.
Gatak - Monday, November 15, 2004 - link
To have the powersupply and drive bays at the bottom is a good thing. It will keep the temperature more balanced inside the case and also provide more room at the top for cards and for exhaust fans, rather than craming everything up there.Pythias - Monday, November 15, 2004 - link
ROFL #6!!Ecmaster76 - Monday, November 15, 2004 - link
If a retail board showed up to a review with that horrible a component layout, it would be figuratively flogged.I find that the review was somewhat flawed since it failed to see what would happen with a discrete graphics card in the box. If one was used, I didn't spot it in the screenshot of the full ATX or uBTX screeshots, and it wasn't mentioned in the text.
Finally it should be mentioned that many people have theorized that the BTX layout would not work well for the Athlon64's onboard memory controller because of issues with trace layout. I'm no expert, but it does look like it might get a little tight.
ksherman - Monday, November 15, 2004 - link
"Anand's *vacation* work trip to Taipei..."Probably one of the funniest things i have read in one of your reviews.... ;)
raskren - Monday, November 15, 2004 - link
As always, so much Intel backlash, simply because, its Intel.This is how cases should have been done originally. Align all the hot components and put a fan in front and behind them. Makes sense, right?
Current ATX design is "put a fan on every hot item you have". At least that's how my case is.
LoneWolf15 - Monday, November 15, 2004 - link
To me, BTX looks like a winner for only one niche: small form factor business desktops. By that definition, I don't include Shuttle's wonderful SFF PC's which work best for home and HTPC enthusiasts. The microBTX form factor looks great for an office environment where quiet operation is a real plus, as well as power consumption, and since business PC's don't need to be cutting-edge, middle-end processors can be used that don't generate a lot of heat.Tor the enthusiast however, BTX looks like a bust to me, more of an attempt by Intel to throw the market out of whack, specifically AMD's market. Enthusiasts already have case designs meant to exhaust a lot of air and keep systems cool. Many enthusiasts LIKE a little bit larger case so that they have more expansion room, with the exception of their HTPC, and so that they can house a decent power supply for that expansion.
I see HP, Compaq, IBM, and other mainstream business computing giants adopting BTX; it will probably do well in the business market as well as in mass retail, where OEMs would rather make a system with less fans to fail and at cheaper cost. That's a pretty big sector for profit of course, but this form factor, IMO, leaves PC enthusiasts out in the cold.
Beenthere - Monday, November 15, 2004 - link
BTX is obviously NOT a great design. Intel changes sockets, Mobo and other specs periodically to FORCE people to update to their latest crap. Don't expect a rush to BTX. It's another Intel spec unlikely to ever gain foothold...For those who don't already know you can do wonders for ATX case cooling with "managed airflow". By actually directing incoming cool air to the heat sources and isolating the CPU fan from warm air in the case, no one really needs a BTX case and your PC will run much cooler with managed airflow.
While Intel definitely needs a tornado inside a box to cool their defective 90 nano CPUs, the BTX standard is just another Intel marketing scam for all practical purposes.
Just say NO !