December 2004 HTPC Case Roundup
by Purav Sanghani on December 27, 2004 2:00 AM EST- Posted in
- Cases/Cooling/PSUs
NMediaPC HTPC 100 (cont'd)
Finally, the last of our HTPC cases uses thumbscrews to secure the top panel. We unscrew the two thumbscrews to see if there are any tool-less features inside the case.Internal Design
From the outside, we could tell that it would not be able to support standard ATX boards, since the HTPC 100 chassis had such a small footprint, and we were correct. In fact, upon opening the top cover, we saw that the internal layout seemed extremely cramped, even for uATX boards!The drive bays in this chassis are designed a bit different than the others. To begin, the 3-1/2" drive bays are positioned so that the drives will be mounted vertically. There are a total of two bays, but one is occupied by the flash memory card reader, which leaves room for only one HDD. There is also a single removable 5-1/4" drive bay in the middle part of the front of the case, which will be used for the optical drive.
Click to enlarge.
The motherboard tray, of course, will only support uATX boards due to the small size of the chassis. We should expect to see other manufacturers design HTPC cases to support only the smaller components in time.
The expansion slots use standard screws in the HTPC 100 chassis also. We were certain that NMediaPC would carry the thumbscrew idea to the inside of the chassis, but were disappointed to find otherwise. Hopefully, future models will carry more tool-less features and we shouldn't be too sour, since HTPCs have only just entered the market.
Cooling
With the HTPC 100 chassis being as small as it is, many would think that there may not be a need for many fans to cool the system. NMediaPC has included only a single 60mm fan mounted at the back of the case where we have seen a pair in the first 3 HTPC cases. We will see if this single fan is indeed enough to compete with the rest of the cases.
Click to enlarge.
The HTPC 100 also comes with a 270W FSP silent power supply almost identical to the SilenX unit in the D.Vine 5, but the obvious lower power output.
Construction
The HTPC 100 chassis combines plastic and steel in its construction. The front bezel is entirely plastic, but has an excellent glossy paint job to give it anything but a bland look. This glossy paint is also carried to the rest of the outer shell of the chassis.The rest of the shell, as well as the internals of the case, is constructed from 0.8mm steel. We did not find any sharp edges inside the case around the drive bays or anywhere else. NMediaPC's case manufacturer did a great job in folding over the edges.
Facebook
Twitter
RSS
34 Comments
View All Comments
Pandamonium - Monday, December 27, 2004 - link
I concur w/ #12. There seems to be incredible bias towards Silverstone here. Despite my research in the world of HTPCs, I had not even heard of NMedia. This article may have introduced me to my future HTPC chassis - my current choice is with the Ahanix X235 (Formerly D.Vine 5)Excellent job on the thermal maps though. This was the first time I've seen thermal readings taken at every square inch and then visually reported in such a manner. If more reviewers pick up on this trend for case reviews, I'd be extremely pleased.
SunTzuTech - Monday, December 27, 2004 - link
Agree with #12. The review seems to be slanted to the SilverStone, despite it's cost and obviously audible intrusion. Perhaps if there had been some more detail into the IR remote that's talked about in the conclusion, comparing and contrasting the other components, I'd buy the review. However, in the end, it doesn't pass the sniff test.If you don't like the NMedia because it only supports mATX, say so. But the fact that it's quieter than the rest, should be the first consideration for an HTPC case.
#11 - I found a LianLi PC9400 and 320W mATX PS in about 3 minutes of searching on the internet. Nice case, but the IR remote is something you'd have to add.
hoppa - Monday, December 27, 2004 - link
also agree w/ 4 and 5. what is with anandtech recently and giving so much praise for big, loud, expensive cases? the nMedia is about half the price, half the size, has half the noise output... for some reason, you didn't give it an X for 'thermal' in that chart (i assume the X means good?), even though its highest temperature was the exact same as that of the silverstone, and overall temperature seemed to be quite the same. and how about these quotes..:from thermal page:
"It is evident that while the NMediaPC's HTPC 100 case had only a single 60mm exhaust, it performed almost as well as the LC10/M and the Cavalier 2, and better than the D.Vine 5 in our thermal benchmarks due to its smaller size as well as the numerous ventilated areas on the shell. On average, the ambient air temperatures per square inch varied by only fractions of a degree."
from conclusion:
"NMediaPC's HTPC 100 did not perform as well in our thermal benchmarks as the LC10/M or the Cavalier 2"
that kind of editorial slant in the conclusion is completely unfair. for someone that reads only the conclusion (which im sure many do), it sounds as though there is actually some real difference in the thermal performance, even though you say originally on the page that performance only varies by fractions of a degree.
so what we have here is a much louder, much more expensive, bigger case than the nMedia, with equal thermal performance and included features, and you give this the gold?! plus, the thing is ugly.
you may give accurate numbers, but lately your conclusions are making me wonder.
gonzo2k - Monday, December 27, 2004 - link
Full size motherboards MUST fit in a HTPC case to be considered practical for my needs.I have an extemely rare Lian-Li PC9400 that gives these three a run for the money.It took me weeks to locate a 300+ watt psu for it (mATX). Finally scored a 320 watt!
Bought the case used (like new) on AT for $150 (came with an FSP-200 psu... the replacement 320W psu was another $35/shipped. Added Vantec Stealth 60mm fans to replace the stock ones & all is well. 2 HDDs, 2 optical drives and a floppy bay for a 7-in-1 media reader make this case a keeper.
JKing76 - Monday, December 27, 2004 - link
I'm failing to see how the rollover temperature data images back up the claim that the Silverstone has better thermal management than the Nmedia.CrystalBay - Monday, December 27, 2004 - link
Nice review, I also like the NMedia for the looks, and quietness. Seems like some manufacturer could find a spot for a low noise, low rpm 120mm fan.mrdudesir - Monday, December 27, 2004 - link
I'd agree with #4 and 5, the NmediaPC seems like a much better buy than the silverstone. Of course astethics depend on the person, but it is a 100 dollars cheaper, and produces less than half the noise of the silverstone. Especially in an htpc environment, 51db is unacceptable.joeld - Monday, December 27, 2004 - link
Why disable the fan on the power supply for the audio tests? Think about it - the power supply comes with each of the chassis's, so why not test the sound "out of the box"? I've got a shuttle XPC, and the loudest fan is the little 40mm power supply fan!Spacecomber - Monday, December 27, 2004 - link
Thanks for taking on this subject for a review, as it is one that I find worthwhile.Besides sound levels and cooling, another factor that I think is particularly important with these HTPCs is their overall external dimensions. Typically, these will be used in a cabinet or other entertaiment stand, and these often have relatively shallow and narrow shelf dimensions. Many computer cases tend to be too long or too wide to conveniently use in these situations.
Perhaps something along these lines could be added in future reviews. Maybe some "group photos" could be incorporated that give a graphic look at how these cases "stack up" against each other, when viewed from the side as well as the front.
Space
sonicDivx - Monday, December 27, 2004 - link
umm 51dbs for a HTPC are you kidding? It would be nice if you included sound files to hear difference. Also would be good to measure the PSU sound level as someone may wish to switch out the PSU for a quieter model.I recommend www.silentpcreview.com to see nice ways to measure sound and report them.
Other than that not a bad review, just needs more depth and analysis