Value Case Roundup: A Look at the Affordable
by Purav Sanghani on February 1, 2005 12:35 AM EST- Posted in
- Cases/Cooling/PSUs
Chenming 301KEBL
Chenming has been manufacturing PC cases for over 20 years. They have an extensive background in the sheet metal business and it shows in each of their products. Today, they are one of the largest OEM companies in the case industry and continue to offer their products and services around the globe. We had to include a Chenming case in our roundup and we chose the 301KEBL, which is based on Chenming's ATX-301KB design.
External Design
Chenming's trademark look has been implemented into the 301KEBL as it has been in many of their other products. The bezel features a door that opens out to the left to expose the four 5-1/4"; drive bays and two 3-1/2"; drive bays. The power and reset buttons are also hidden away behind the door to the right of the 3-1/2"; bays. A small, but useful, feature is the easy-to-remove drive bay covers that can be pulled off directly from the front of the case.
The bottom section of the bezel consists of the vents similar to the other cases in Chenming's product line. At the top of this section is a small fold-up door that hides two USB and one FireWire port. A quick glance may have us believe that there is nothing there, though. To the right of this door are the power and HDD activity lights.
The side panels are bare except for two rows of vents at the bottom of the panels. Each panel can be removed easily to get to the inside.
Internal Design
The inside of the 301KEBL was something that we weren't expecting at all. Along with the standard four 5-1/4"; drive bays, there was a removable drive cage, which could fit up to four 3-1/2"; drives, two of them exposed. To remove this drive cage, we pushed the small lever back and pulled the drive cage back to remove it. This will certainly help install drives when screwing them in from both sides.
The motherboard tray accepts microATX and full ATX motherboards as the others do. Using standard stand-offs included with the case, we can mount our test board as well as various other boards into the 301KEBL.
The expansion slots also have a feature similar to that on Foxconn's TK-09. The expansion slot mounts protrude out the back of the case and are covered by a blue plastic casing. This casing also houses extra screws to keep them in a handy place. To remove this casing, we push the stopper down from the inside and pull the plastic piece off from the back of the chassis.
Facebook
Twitter
RSS
58 Comments
View All Comments
KristopherKubicki - Tuesday, February 1, 2005 - link
sdfg: I think you mean the Antec Lanboy looks like the Chenming cases...Kristopher
aeternitas - Tuesday, February 1, 2005 - link
Yes #24, we are all spoiled. Spoiled with _quality_. Some of us like to have nice things. I for one dont want to see cheap plastic houseing my loveingly put together equiptment. This is a hobby for most, and with a hobby means quality is the standard.If you are just building PCs for people that dont care, then by all means, but this isnt really a site for people that dont care.
sprockkets - Tuesday, February 1, 2005 - link
Err, no In-Win cases?miketheidiot - Tuesday, February 1, 2005 - link
these cases are all trash. Drop the extra $20 and get a decent antec PSU/case combo.And why wasn't the Sonata or something lke that included?
Cygni - Tuesday, February 1, 2005 - link
God you guys are ridiculous! I personally use Antec cases for my own personal builds, but when building for my business, i use the cheapest non-ugly case I can find. Of course, PSU is a concern, but im not slapping FX's in with a 250wt. PSU does change reliability, this is fact, but it is FAR overhyped. Bad RAM can make 10 times the impact.Honestly, who gives a crap if the case isnt amazing? Its a CASE! As long as its not ugly, and as long as its fairly well put together (almost all of them are these days), who cares? 99% of the people i build computers for never open the case, so who cares if it has sharp edges? I dont know. You guys all sound really really spoiled, haha. I personally thought alot of the cases reviewed are FAR less ugly then so called "Gamer cases" that are out there with friggen dragons with LED eyes that readout useless voltage information...
MarkM - Tuesday, February 1, 2005 - link
I'm with #4 too -- a the point you are getting this level case, you are probably looking at a no-frills basic PC with cheaper components, at which point it doesn't make much sense for you to be building anyway, you should just get a Dell & get that conveniecne/security of waranty.Not to mention if you are building so basic a PC, you probably are not reading anandtech :)
Anywya, I'm not sure I see great value. I got my Sonata with the 350w quiet PSU for $70 total AR, some of these cases would cost about as much with even an inferior PSU. So why bother at all?
digit - Tuesday, February 1, 2005 - link
ive got that raidmax (windowless version) and i really like it. it came with the 4 fans already installed in front and its definitely the coolest running case ive ever had. recently ive started having problems with power stability from the psu, but it worked just fine for over a year.fatdog6 - Tuesday, February 1, 2005 - link
Im pretty dissapointed with this review,first off of the 150 or so systems that i have built my first consideration is reliablity/stability expecially in a budget build. I I can i imagine getting a call and then seeing the power supply fell down knocked the cpu off into the gpu trashing the memory on the way.!!
As stated by Spacecomber #15
"So far, I haven't found a case and power supply (bought seperately or together) that is as good as and less expensive than the Antec 1650, which is my choice for entry level and basic systems. $55 for a case that includes 120mm fan, Antec SL-350 power supply, and side CPU air guide."
As stated by Lonewolf #13
"The power supplies of these review units are horrible, and do not in any way represent good additional value"
DaveA - Tuesday, February 1, 2005 - link
http://images.anandtech.com/reviews/cases/roundups...yeah whats up with that?
Desslok - Tuesday, February 1, 2005 - link
In the review for the Codegen 6209 is the motherboard tilted in the install pic??