Value Case Roundup: A Look at the Affordable
by Purav Sanghani on February 1, 2005 12:35 AM EST- Posted in
- Cases/Cooling/PSUs
Powmax CP769PL
Powmax, like many other case manufacturers, has a short line of products but quality products at that. Besides PC cases, Powmax designs and manufactures high quality power supplies and other accessories such as UPSs. Today we will look at one of their traditional cases, their 769 series.
External Design
Being the seventh case we have looked at in this roundup we can surely say this is aesthetically the simplest looking case of them all. There is no special coloring on the bezel (though Powmax does have 3 different versions of the case), which is all black.
There are, of course, four 5-1/4" drive bays and two external 3-1/2" bays aligned at the vertical center of the bezel.
Under the bays we see the reset button, which is extremely small like many of the other cases. To the sides of the reset button we see the power and HDD activity LEDs and the large chrome power button directly under the reset button.
At the bottom of the bezel we see a fold up door which hides away into the case when opened to reveal the audio in/out ports on the left and dual USB ports on the right. Again we see no FireWire ports, which obviously seems to be a trend in budget cases.
The side panels have what looks like an hourglass design on them with small bumps punched out. To remove these panels we need to remove the screws on the back and slide back. The panels also do not have any indentations to get a good grip so do make sure to have moist hands when doing this.
Internal Design
With a total of four 5-1/4" drive bays and seven 3-1/2" drive bays, the 769 is ready for expandability. The 3-1/2" drive bays are lined with holes to mount HDD with screws as far back or up as desired. All of the bays also have platforms the drives can sit on while installing them.
The motherboard tray accepts microATX and full AT boards using screw-in stand-offs.
Similar to AsiaPro's 8654BL, the bottom four expansion slots feature a vent and screw holes to mount an extra 80mm fan. Of course, once those expansion slot covers are removed, a fan cannot be installed. This feature is great for those who use only a few expansion cards such as microATX board owners.
Facebook
Twitter
RSS
58 Comments
View All Comments
DAPUNISHER - Tuesday, February 1, 2005 - link
http://www.newegg.com/app/ViewProductDesc.asp?desc...Has side and top fans included and goes for $31. Also has room for 1 intake and 2 exhaust and good conservative styling.
DaveA - Tuesday, February 1, 2005 - link
oh and the athenatech a602 goes for $48.50 on newegg. i recommend it over any of the cases reviewed here.DaveA - Tuesday, February 1, 2005 - link
how come you didnt include the athenatech a602? you recommended it in your recent budget guide. it has 120mm fan slots in the front and rear of the case, a 92mm cpu duct on the side of the case which can take a 92mm fan. it has 2 usb 2.0 ports on the front along with microphone and speaker ports. its almost completely tooless as well. has a removable hard drive cage and no sharp edges.Spacecomber - Tuesday, February 1, 2005 - link
I don't think that I can see making use of any but a couple of these cases reviewed, even for an inexpensive system. I mean there's inexpensive and then there's cheap, and most of these cases exude cheapness. For instance, I can't believe that a few drilled out holes in sheet metal can provide a proper fan vent; it looks more like what you would use for straining your spaghetti noodles.I guess that I'm also not of the school that screwless is better. I mean operating a screwdriver is pretty simple; often more so than trying to figure out how all the various clips and latches are suppose to work. I usually end up feeling like a system that uses screws, instead of these various clips, is really assembled and not just hung together.
So far, I haven't found a case and power supply (bought seperately or together) that is as good as and less expensive than the Antec 1650, which is my choice for entry level and basic systems. $55 for a case that includes 120mm fan, Antec SL-350 power supply, and side CPU air guide.
Antec just needs to start upgrading their power supplies to more models with 24 pin main power cables and 6 pin PCI-E video card connectors, but I'm talking about their cases and power supplies aimed at higher end systems, now.
Anyway, that's just my 2 cents worth. I always enjoy looking at any review that tries to focus on practical hardware such as this review does.
Space
sdfg - Tuesday, February 1, 2005 - link
Actually, the Chenming case looks very similar to the Antec Lanboy, only steel and sans power supply.LoneWolf15 - Tuesday, February 1, 2005 - link
The power supplies of these review units are horrible, and do not in any way represent good additional value, IMO. Every enthusiast forum I know of rates RaidMax and Powmax PSU's as utter crap. I noticed that at least one of them only delivered 12 amps on the 12v rail, not even close to what Barton core Athlon XP systems need for reasonable stability. I'm not sure I even trust the ratings on the stickers though, as cheap power supplies tend to list overly optimistic specs.For not much more than this, you can buy an Antec SX630II or SX635II case that may not be flashy, but is built more solidly, won't cut you, and has an Antec power supply. If you're serious about making a good system though, buy your power supply separately from the case. With cases, you really do get what you pay for, and the Chenming was the only case I saw in this review that I didn't think was crap.
MrEMan - Tuesday, February 1, 2005 - link
What is it these days with all the cases being mini/mid/full size towers? Unless you put the tower under the desk, it takes up more desktop real estate than putting the monitor on top of a desktop case (which also raises the monitor to eye level, which is preferred, unless the user has bi-focals).I don't want a tower and I don't want an XPC.
I want a standard desktop case with multiple bay options which can hold either a 19" monitor or a flat panel (neither of which an XPC will do apart from a balancing act).
Besides, since heat rises, vertical orientated expansion slots are better than the heat accumulating horizontal orientated slots in all tower cases.
avijay - Tuesday, February 1, 2005 - link
Good review. Its sad to note though for cases with a PSU, the PSU doesn't get much coverage despite requests everytime a case review is published. No indication of the reliability of the PSU that comes along with the case. Usually everyone who goes looking for a case would like to buy one with a PSU if available and it would be good to know the pros and cons of PSUs and also how they perform. Everyone knows a good PSU is as important for a stable system as any of the components. I'd really like to see how these PSUs (and for that matter some of the other well known PSUs) perform when put to the test.Possible to do a PSU roundup? If PSUs cant be covered in case reviews, please cover them separately.
Dranzerk - Tuesday, February 1, 2005 - link
I would rather buy one of these than all the stupid expensive voltron looking "gamer" cases on the market. I saw a case that looked like someone puked up crayons they ate all over it..it was $90! lolNice article.
eetnoyer - Tuesday, February 1, 2005 - link
Still waiting on the "affordable" memory review.