Aspire X-QPack: A Lanparty Dream
by Joshua Buss on July 2, 2005 1:15 PM EST- Posted in
- Cases/Cooling/PSUs
Cooling
The X-QPack relies on an all-exhaust system to keep the computer cool. The main component is a semi-transparent blue LED 120mm fan.
Click to Enlarge
Larger fans allow for more air to be moved at lower noise volumes, so this is definitely a good sign that this will probably not be too noisy of a case.
The power supply has an internal 80mm fan set to exhaust as well, so these two fans working together will simply attempt to suck all of the hot air out of the back, and by creating this negative pressure inside the chassis, bring cooler air in through the perforations on both sides of the case.
Click to Enlarge
Something else to keep in mind when it comes to cooling in this case is that there simply isn't enough clearance for some of the larger heatsink/fan combos for CPUs out there. Our test bed has a Zalman CNPS7000cu heatsink/fan and it fits with only about half an inch of clearance when sliding the tray back into position.
Click to Enlarge
Construction
Overall we are very happy at the way the X-QPack is put together. Parts such as the motherboard tray and hard drive cage are made with aluminum to help keep the components cool and the case light, yet there are enough supporting rods and beams throughout the case to keep it very sturdy. Here are the two main supports for the power supply, one of which also helps to hold up the 5.25" drives.
Click to Enlarge
And here you can see how the long rod will help keep the case's front or backs from flexing under the strain of holding up the power supply.
Click to Enlarge
Looking from the other side you can see the rolled edge for the hard drive support beam and how this will also help support the drives.
Click to Enlarge
Lastly, we considered the construction and design of the front-mounted carrying handle, and in practice it is easy to use, solidly built, and still manages to look good when collapsed.
Click to Enlarge
Facebook
Twitter
RSS
66 Comments
View All Comments
R3MF - Tuesday, July 5, 2005 - link
#52 -"I second (or third or fourth or whatever) the call for some words of comparison to the Antec Aria (it's the only other mATX standard cube case, right?); I can see this offers more bays and a bigger power supply, but what else?"
add the Silverstone SG01 to that comparison too.
and have a part two article looking at high-end mATX motherboards.
that would be ace!
Noriaki - Tuesday, July 5, 2005 - link
Hey is the 420W PSU that comes with this case 20pin or 24pin main connector? And I know it matters less, but does it have the 6pin PCIe connector?sprockkets - Monday, July 4, 2005 - link
FSP or Fortron Source Power and it's varients are one of the best.johnsonx - Monday, July 4, 2005 - link
I second (or third or fourth or whatever) the call for some words of comparison to the Antec Aria (it's the only other mATX standard cube case, right?); I can see this offers more bays and a bigger power supply, but what else?Also, for everyone talking about the power supply not being standard, I don't think anything prevents you from installing a normal depth ATX power supply, as long as your optical drives are not overly long; most of the newer optical drives are pretty short.
Finally, I do agree about the window. Couldn't they offer a windowsless variant? Cases with windows are just toys to me.
IronChefMoto - Monday, July 4, 2005 - link
I'm not real happy that it has a non-standard PSU -- one of the things that worries me about long-term ownership of my Shuttle SN85G4V3 XPC. The advantage with a DIY mATX box like this SHOULD BE the replaceability of parts. Of course, Antec screwed themselves in the ass with their proprietary Aria PSU in the same way.I'm also not keen on the windows. Windows are nice on a large tower where you can clean up your case (when you have the room too). Windows on something like this is akin to showing off a really unkempt closet full of pack rat stuff.
Nice review, by the way. Would love to see a comparison if and when the Antec Aria II comes out.
Pannenkoek - Monday, July 4, 2005 - link
[OT] Thanks Kristopher, I missed those comments. Odd that that would be possible, but I appreciate the protection of their sources by editors in any case.R3MF - Monday, July 4, 2005 - link
[edit]with the price difference i could even afford to stick the SST VFD panel in the spare 5.25" bay for use in a HTPC!
[/edit]
R3MF - Monday, July 4, 2005 - link
@ 44 (re: SST SG01) -i agree that SST cases are overpriced, but it is very affordable compared to a shuttle.
my SN25P cost me £285
by comparison:
SG01 = £100 (or thereabouts)
NF4 mATX M/B = £60 (tho i would pay more for a better baord)
400W Akasa ATX2.01 PSU = £40 (yeah, sure i need more, not)
Via ENVY PCI soundcard = £25
TOTAL = £225
looks pretty affordable to me.:)
i only wish there were some high-end mATX motherboards to put in it. i repeat; come on MSI/Abit/DFI/Asus, show us what you can do.......
Tujan - Monday, July 4, 2005 - link
Dont know if that was a positive on a different full size power supply. Or the same positive for a full size DVD player.Too Im not fully convinced of the carrying copacity used from the handle of this m-ATX case.
I think that this case however has been the best looking m-atx alternative out there for a few months running. Everytime I look at Newegg.com they are sold out of them.
If used one of those ATX 2.0 w detachable wiring would be a super setup.
Surprising other m-atx manufacturers don't have something like this on a melt already. There are several M-ATX Intel that can run dual-core with this case.Hard to find on the web though. Certainly the m-atx AMDs would go well with it.
Would get one to carry it around.Looks really good,. Nothing beats its value cost. I would trade out the power supply for one I listed,if it fit.
All sorts of colors too.
Tujan - Monday, July 4, 2005 - link