Aspire X-QPack: A Lanparty Dream
by Joshua Buss on July 2, 2005 1:15 PM EST- Posted in
- Cases/Cooling/PSUs
Installation Cont'd
After connecting up all the cables, including the two sensors for the front-mounted temperature display, we were ready to put the custom-sized power supply back in. It is this step which reminds you just how tight everything is in this unit, but keep in mind we have a nice beefy 420 watt power supply we're working with, not a 250 or 300 watt one like the ones that come with most small form factor pc's.
Click to Enlarge
One more shot with everything installed viewed from the other side. Here one can see what we meant by using the extra space up front for 'cable management'. We should note how if our motherboard had supported external USB and Firewire connections, some of that cable clutter would be greatly reduced.
Click to Enlarge
With everything installed, it's time to put the cover back on. This is when one of the only real problems we found with this case came to light. While we didn't actually cut ourselves working on the unit, in putting the cover back on one of the side windows came down across the HDD cage and received a nasty scratch. We checked the edge and it did not appear to have been deburred at all. We looked carefully at other edges in the case and came to the conclusion that hardly any of them had been smoothed out. Many of the edges had been tucked around into bends though, which explains why we didn't hurt ourselves working on the case. Just be sure to be careful and it should not be too much of a problem, but then again Aspire could have put just a little extra attention to detail in there and made sure all the edges had been smoothed over.
Once the cover was replaced, we noticed how overall the windows do a nice job of showing off the internal components. Here is a small gallery of pics just showing the case with everything installed, some with the unit powered on to show the LED fans.
Click to Enlarge
Click to Enlarge
Click to Enlarge
Click to Enlarge
Click to Enlarge
Click to Enlarge
Facebook
Twitter
RSS
66 Comments
View All Comments
R3MF - Tuesday, July 5, 2005 - link
#52 -"I second (or third or fourth or whatever) the call for some words of comparison to the Antec Aria (it's the only other mATX standard cube case, right?); I can see this offers more bays and a bigger power supply, but what else?"
add the Silverstone SG01 to that comparison too.
and have a part two article looking at high-end mATX motherboards.
that would be ace!
Noriaki - Tuesday, July 5, 2005 - link
Hey is the 420W PSU that comes with this case 20pin or 24pin main connector? And I know it matters less, but does it have the 6pin PCIe connector?sprockkets - Monday, July 4, 2005 - link
FSP or Fortron Source Power and it's varients are one of the best.johnsonx - Monday, July 4, 2005 - link
I second (or third or fourth or whatever) the call for some words of comparison to the Antec Aria (it's the only other mATX standard cube case, right?); I can see this offers more bays and a bigger power supply, but what else?Also, for everyone talking about the power supply not being standard, I don't think anything prevents you from installing a normal depth ATX power supply, as long as your optical drives are not overly long; most of the newer optical drives are pretty short.
Finally, I do agree about the window. Couldn't they offer a windowsless variant? Cases with windows are just toys to me.
IronChefMoto - Monday, July 4, 2005 - link
I'm not real happy that it has a non-standard PSU -- one of the things that worries me about long-term ownership of my Shuttle SN85G4V3 XPC. The advantage with a DIY mATX box like this SHOULD BE the replaceability of parts. Of course, Antec screwed themselves in the ass with their proprietary Aria PSU in the same way.I'm also not keen on the windows. Windows are nice on a large tower where you can clean up your case (when you have the room too). Windows on something like this is akin to showing off a really unkempt closet full of pack rat stuff.
Nice review, by the way. Would love to see a comparison if and when the Antec Aria II comes out.
Pannenkoek - Monday, July 4, 2005 - link
[OT] Thanks Kristopher, I missed those comments. Odd that that would be possible, but I appreciate the protection of their sources by editors in any case.R3MF - Monday, July 4, 2005 - link
[edit]with the price difference i could even afford to stick the SST VFD panel in the spare 5.25" bay for use in a HTPC!
[/edit]
R3MF - Monday, July 4, 2005 - link
@ 44 (re: SST SG01) -i agree that SST cases are overpriced, but it is very affordable compared to a shuttle.
my SN25P cost me £285
by comparison:
SG01 = £100 (or thereabouts)
NF4 mATX M/B = £60 (tho i would pay more for a better baord)
400W Akasa ATX2.01 PSU = £40 (yeah, sure i need more, not)
Via ENVY PCI soundcard = £25
TOTAL = £225
looks pretty affordable to me.:)
i only wish there were some high-end mATX motherboards to put in it. i repeat; come on MSI/Abit/DFI/Asus, show us what you can do.......
Tujan - Monday, July 4, 2005 - link
Dont know if that was a positive on a different full size power supply. Or the same positive for a full size DVD player.Too Im not fully convinced of the carrying copacity used from the handle of this m-ATX case.
I think that this case however has been the best looking m-atx alternative out there for a few months running. Everytime I look at Newegg.com they are sold out of them.
If used one of those ATX 2.0 w detachable wiring would be a super setup.
Surprising other m-atx manufacturers don't have something like this on a melt already. There are several M-ATX Intel that can run dual-core with this case.Hard to find on the web though. Certainly the m-atx AMDs would go well with it.
Would get one to carry it around.Looks really good,. Nothing beats its value cost. I would trade out the power supply for one I listed,if it fit.
All sorts of colors too.
Tujan - Monday, July 4, 2005 - link