Aspire X-QPack: A Lanparty Dream
by Joshua Buss on July 2, 2005 1:15 PM EST- Posted in
- Cases/Cooling/PSUs
Internal Design cont'd
To get everything into a case this size, the manufacturer has to be pretty clever when it comes to the layout for each component. After taking out the power supply, the next piece you want to take out could be the hard drive cage. The cage on the X-QPack is held in place by two rails and two screws, visible in this close up.
Click to Enlarge
If one didn't want to put screws holding the hard drives into the cage on both sides, there's actually just barely enough room to get both drives into place without removing the cage.
Click to Enlarge
With the hard drive secured the cage we took one more shot so you could see how to get the screws in on this side of the 5.25" mounting brackets. You can also see the rails that help make the removal and install of the HD cage so easy.
Click to Enlarge
After getting the hard drives situated, the next step would probably be to install the motherboard. After taking off the two screws in the back it simply slides right out of the rear of the case.
Click to Enlarge
Here's a shot of it propped up against the back of the case.
Click to Enlarge
Moving right along...
Facebook
Twitter
RSS
66 Comments
View All Comments
SilthDraeth - Sunday, July 3, 2005 - link
In response to my above post, I simply mean to convey that if this case does well at heat disipation, and providing a well designed, thoughtful case for the microATX formfacter, then the only disadvanage you could say it has compared to say a microBTX or any other small form factor design, would be the inability to support those motherboards. In all things buy what works best for you.SilthDraeth - Saturday, July 2, 2005 - link
Anyone that reads Porkster's comments knows he is anti AMD. But Porkster, if not micro atx, then what form factor?slashbinslashbash - Saturday, July 2, 2005 - link
I agree, great review. I too have been thinking about building a SFF PC, and this case adds a lot of options. I especially like that it can handle extra PCI slots and 2 optical drives. The handle is pretty cool too :)Tamale - Saturday, July 2, 2005 - link
I dunno man.. with cases this well designed and intel under so much fire I think atx is here for a long time yet to comeNordicNINE - Saturday, July 2, 2005 - link
#20, I was thinking of using that board for a Media Center PC since it has a DX9 video onboard.I had one earlier for a client and played with it a bit before hand. Plenty for a HTPC (MCE2k5) machine.
I wish it had a DVI port though since I want to get a DLP TV later this year.
porkster - Saturday, July 2, 2005 - link
Pity it's ATX. It's a bit late int he day to be making ATX cases..
kaborka - Saturday, July 2, 2005 - link
I've had my eye on the MSI microATX board with the RS480 chipset for building a HTPC. It has the onboard Radeon graphics + it's socket 939. This looks like it might be just the box for it. (Dunno if this board has 1000MHz HT, though.)NordicNINE - Saturday, July 2, 2005 - link
I was just going to buy this case.I hope this review doesn't make it harder to find. :)
Noriaki - Saturday, July 2, 2005 - link
Hey, great timing. I've been thinking about shunting my current machine as is over to a Linux box and building a brand new gaming rig. My Athlon XP2100+ is a little slow these days ;)And I would love for it to be a nice compact case for LANing. This article couldn't be better timed.
Are there any MicroATX boards that support 1000Mhz HyperTransport and the dual core Athlon 64s? I understand Via's chipset is a bit sketchy on A64x2s, and the K8M800 is 800 HT only I believe.
Tamale - Saturday, July 2, 2005 - link
lot of good questions here... I'll try to answer as many as possible..first off, yes, I wish I could've put in a more detailed review of the power supply itself - I'm currently working on getting a testbed that would be much more stressful to see how power supplies will stand up to it.
as far as dimensions, stromgald is right that it has the right mounting hole positions but that it's just shallower.. if you had a particularly shallow optical drive and/or were careful with the cables you could probably use a normal PSU.
I did have two hard drives installed at the end.. the seagate (sata) is behind the western digital (pata).. this was my attempt at putting as much of a load on the power supply as I could and seeing how the case handled the extra heat.
my comment about the excess cable clutter was simply an attempt to say that if our motherboard had the headers for extra usb/firewire cables I could've routed those cables to the appropriate places on the mobo instead of just cramming them up front.
I hope to get a system for testing power supplies in a much more informational manner very soon.