Aspire X-QPack: A Lanparty Dream
by Joshua Buss on July 2, 2005 1:15 PM EST- Posted in
- Cases/Cooling/PSUs
Benchmarking - Sound
One of the biggest complaints with smaller form factor PCs is that a lot of them incorporate the usage of small, whining fans. Luckily we can safely say that the X-QPack does not fit this stereotype. To measure the Aspire enclosure we held a sound pressure level sensor twelve inches away from the closed case with our test bed installed and running. Take a look at the level compared to some of the other cases we have reviewed recently.
44dBa is a fantastic number for a smaller case (though there is still room for improvement). To put the number into perspective, the sound meter actually never dropped below 39dBa just sitting still our test lab, meaning that a computer built in this case could quite well be drowned out entirely by other background noises. In fact, we're quite sure we were mainly hearing the sound of the older hard drive more so than the two fans in the X-QPack. The 120mm's fan noise is much more pleasant too compared to the higher-pitched noise that smaller fans tend to make. If one demands the absolute quietest from their pc though, they could even replace this 120mm fan with a different one, or simply to add a fan controller so they could gain control over how fast the fan spins and further lower the operating noise.
Facebook
Twitter
RSS
66 Comments
View All Comments
SilthDraeth - Sunday, July 3, 2005 - link
In response to my above post, I simply mean to convey that if this case does well at heat disipation, and providing a well designed, thoughtful case for the microATX formfacter, then the only disadvanage you could say it has compared to say a microBTX or any other small form factor design, would be the inability to support those motherboards. In all things buy what works best for you.SilthDraeth - Saturday, July 2, 2005 - link
Anyone that reads Porkster's comments knows he is anti AMD. But Porkster, if not micro atx, then what form factor?slashbinslashbash - Saturday, July 2, 2005 - link
I agree, great review. I too have been thinking about building a SFF PC, and this case adds a lot of options. I especially like that it can handle extra PCI slots and 2 optical drives. The handle is pretty cool too :)Tamale - Saturday, July 2, 2005 - link
I dunno man.. with cases this well designed and intel under so much fire I think atx is here for a long time yet to comeNordicNINE - Saturday, July 2, 2005 - link
#20, I was thinking of using that board for a Media Center PC since it has a DX9 video onboard.I had one earlier for a client and played with it a bit before hand. Plenty for a HTPC (MCE2k5) machine.
I wish it had a DVI port though since I want to get a DLP TV later this year.
porkster - Saturday, July 2, 2005 - link
Pity it's ATX. It's a bit late int he day to be making ATX cases..
kaborka - Saturday, July 2, 2005 - link
I've had my eye on the MSI microATX board with the RS480 chipset for building a HTPC. It has the onboard Radeon graphics + it's socket 939. This looks like it might be just the box for it. (Dunno if this board has 1000MHz HT, though.)NordicNINE - Saturday, July 2, 2005 - link
I was just going to buy this case.I hope this review doesn't make it harder to find. :)
Noriaki - Saturday, July 2, 2005 - link
Hey, great timing. I've been thinking about shunting my current machine as is over to a Linux box and building a brand new gaming rig. My Athlon XP2100+ is a little slow these days ;)And I would love for it to be a nice compact case for LANing. This article couldn't be better timed.
Are there any MicroATX boards that support 1000Mhz HyperTransport and the dual core Athlon 64s? I understand Via's chipset is a bit sketchy on A64x2s, and the K8M800 is 800 HT only I believe.
Tamale - Saturday, July 2, 2005 - link
lot of good questions here... I'll try to answer as many as possible..first off, yes, I wish I could've put in a more detailed review of the power supply itself - I'm currently working on getting a testbed that would be much more stressful to see how power supplies will stand up to it.
as far as dimensions, stromgald is right that it has the right mounting hole positions but that it's just shallower.. if you had a particularly shallow optical drive and/or were careful with the cables you could probably use a normal PSU.
I did have two hard drives installed at the end.. the seagate (sata) is behind the western digital (pata).. this was my attempt at putting as much of a load on the power supply as I could and seeing how the case handled the extra heat.
my comment about the excess cable clutter was simply an attempt to say that if our motherboard had the headers for extra usb/firewire cables I could've routed those cables to the appropriate places on the mobo instead of just cramming them up front.
I hope to get a system for testing power supplies in a much more informational manner very soon.