nForce4 Ultra Roundup: Charting the Mainstream
by Wesley Fink on July 5, 2005 10:28 PM EST- Posted in
- Motherboards
ECS KN1 Extreme: Features and Layout
| Specification | ECS KN1 Extreme |
| CPU Interface | Socket 939 Athlon 64 |
| Chipset | nForce4 Ultra (single chip) |
| BUS Speeds | 200MHz to 400MHz (in 1MHz increments) |
| PCI/AGP Speeds | Asynchronous (Fixed) |
| PCI Express | Fixed |
| Core Voltage | Normal, +25mV to +375mV in 25mV increments (to 1.875V on 1.5V CPU) |
| DRAM Voltage | Auto, 2.55V to 3.11V in 0.08V increments |
| Chipset Voltage | NA |
| Hyper Transport Ratios | Auto, 1X to 5X in 1X increments |
| LDT Bus Transfer | 16/16, 16/8, 8/16, 8/8 |
| CPU Ratios | Startup, 4x to 25x in 0.5x increments |
| DRAM Speeds | Auto, 100, 133, 166, 200 |
| Memory Command Rate | Auto |
| Memory Slots | Four 184-pin DDR Dual-Channel Slots Unbuffered ECC or non-ECC Memory to 4GB Total |
| Expansion Slots | 1 x16 PCIe Slots 2 x1 PCIe 3 PCI Slots |
| Onboard SATA | 4-Drive SATA 2 by nF4 2 Drives by SiS 180 |
| Onboard IDE | Two Standard NVIDIA ATA133/100/66 (4 drives) |
| SATA/IDE RAID | 4-Drive SATA 2 PLUS 4-Drive IDE (8 total) Can be combined in RAID 0, 1 PLUS 2 Drives by SiS 180 RAID 0, 1 |
| Onboard USB 2.0/IEEE-1394 | 10 USB 2.0 ports supported nF4 2 1394A FireWire ports by TI TSB43AB22A |
| Onboard LAN | Dual Gigabit PCIe Ethernet Gigabit PCIe by Marvel 88E1111 PHY 10/100 PCI by Realtek RTL8100C |
| Onboard Audio | Realtek ALC850 8-Channel codec with 6 UAJ audio jacks, CD-in, front audio, Optical and Coaxial SPDIF Out |
| Other Features | AMD X2 Support with 1.1A or higher BIOS Slot LEDs, Power Transistor Fan and Duct |
| BIOS | Award 1.1A (6/02/05) |
ECS reserves the Extreme label for their top motherboards aimed at the computer enthusiast. While the Extreme boards have been very high on features, they have remained very affordable, often competing with boards that have much more modest feature sets. ECS decided some time ago that they wanted to go after the computer enthusiast; however, the path has been anything but a smooth one. As we have said in other reviews, it is one thing to aim for a board at the enthusiast market, but it is quite another to deliver the features and performance that enthusiasts really want.
Our last review of an ECS Extreme was in the Intel 915 roundup, where the ECS PF4 915P Extreme earned an Editors Choice in that huge roundup. For this roundup, we are taking a closer look at the ECS KN1 Extreme, based on the NVIDIA nForce Ultra chipset.
The ECS certainly has most of the BIOS options that an enthusiast is looking for. Memory voltage goes to 3.11V, which is significantly better than many top-name motherboards, which still have trouble supplying more than 2.8V as a memory voltage option. It would be better if options went to 3.5V, but in fairness, this range will provide the voltage needed for any memory except the high-voltage 2-2-2 OCZ VX and Mushkin Redline, which need 3.5V for best performance. Similarly, processor voltage options to +375mv are very adequate with today's CPUs, and the bus speeds to 400 and full range of processor ratios give users the option to make the most of the Athlon 64 capabilities. The only question that remains is whether or not the nice options mean anything on the KN1 Extreme; in other words, do they actually function?
Click image to enlarge.
There is nothing to complain about in the rest of the layout as ECS did a very good job on the KN1 Extreme. The ATX 24-pin and 12V 4-pin power connectors are on board edges where they belong. The IDE ports are in the ideal position, the 6 SATA ports fully clear the PCIe slot, and the additional connectors are on the bottom edge of the board, outside of the slot area.
ECS also thoughtfully included both coaxial and optical SPDIF out connectors on the rear panel, which also features dual-LAN (gigabit PCIe and 10/100 PCI) connectors. Perhaps manufacturers could label their dual LAN connections because even though I have a 50/50 chance, I seem always to plug the 10/100 when I'm looking for the Gigabit LAN. ECS also features a lime-green shroud with cooling fan for the power transistors, a feature more typical of Abit than ECS. All-in-all, the layout, feature set, and BIOS options are right on target for the audience that ECS hopes to attract.
We should mention in passing that, at first, we couldn't find the CPU ratios in BIOS. After complaining to ECS that there were no ratios, they pointed us to the Power Management tab, where Hammer FID controls were located. This certainly was not an intuitive placement for CPU ratios, although we do get the logic that Hammer FID or ratios are there because of Cool'N'Quiet, which is definitely related to Power Management. In any event, the ratios are there in Power Management, so we might save you a bit of searching.
DFI LANParty UT nF4 Ultra-D: Overclocking and Stress Testing
ECS KN1 Extreme: Overclocking and Stress Testing
Facebook
Twitter
RSS
75 Comments
View All Comments
Andreos - Thursday, July 7, 2005 - link
Wesley - That helps, thanks for educating me on this stuff.Wesley Fink - Thursday, July 7, 2005 - link
#51 - We reviewed the K8NXP-SLI in the SLI roundup and the Ultra counterpart is the K8NXP-9. If you will look closely at the Gigabyte website pictures of the K8N Ultra-9 you will see it is the same board with a passive heatsink and fewer features. For information on how your Gigabyte performs at stock speeds (which is all that interests you) then please refer to the single video benchmarks for the K8NXP-SLI in the SLI roundup. We report all benchmarks at stock speeds so you and other readers can compare performance. Overclocking is covered as a separate feature. If you do not choose to overclock that is your business, but the information you are asking for is fully covered in our reviews. ALL the nForce4 Ultra boards perform almost the same at stock speeds, which should not really come as a surprise since the memory controller is on the CPU. If you were expecting the Gigabyte K8N Ultra-9 would perform better at stock speeds that anything else then you are badly misinformed. The Gigabyte boards do very well at stock speeds, but all the nF4 boards are close in performance at stock speeds.#53 - The BFG VNF4 Ultra is a rebadged (relabeled) Chaintech VNF4 motherboard. We did review the Chaintech VNF4 Ultra in this roundup.
VinnyS - Thursday, July 7, 2005 - link
I would have liked to have seen the BFG NF4 Ultra board included in this round-up, it got high marks in a [H]ardOCP review. Any chance for an update to this review with this board included?TheGlassman - Thursday, July 7, 2005 - link
Well I was tired, You were using the 6-3-05 bios, should have quit while I was ahead. So now I have no idea what the problem was.At any rate the 6-3-05 bios is a dual core bios, so no flashing to a beta is needed for dual core.
Andreos - Thursday, July 7, 2005 - link
I don't think you guys know your audience all that well. Not everybody is into overclocking to the hairy edge. Some of us wnat a fast and quiet board with dead-nuts solid reliability. For that reason, it is incomprehensible that the Gigabyte GA-K8N Ultra-9 was not included in this so-called "roundup". This board has no SLI counterpart, but it is of extreme interest to a lot of folks planning workstations based on X2 processors (and for which overclocking is of lower interest than reliable operation). Wake up dudes - the game is changing! Clock speed is no longer the Holy Grail. Other sites are savvy to this and will soon be eating your lunch!Palek - Thursday, July 7, 2005 - link
#49, no worries. I don't work for Anandtech, by the way. :)By my "far more than a day" remark I intended to say that I figured a review like this would take more like a week at a minimum - quite possibly even longer - to put together, so by the time the article was released some BIOSes would be outdated, since BIOS updates seem to pop up every other day these days. That is all.
TheGlassman - Wednesday, July 6, 2005 - link
Sorry Palek, you didn't write the review, oops. My apologies to you and time for bed.Wesley, can you look into that?
Thanks, and I'm sure glad the over a day remark wasn't yours.
TheGlassman - Wednesday, July 6, 2005 - link
Thanks for your comments Palek, especially the latest and greatest comment. I checked the bios you used for the chaintech, it is a dual core only beta, ANY release bios including the 6-03-05 official dual core support (a month older than either of the winning (because they over clock TCCD better?) boards, and older than any dated bios) will perform much better in overclocking and probably every other test.If Chaintech shipped you a board with that bios it wasn't a wise move for a single core test. I think it would be fair to retest the chaintech vnf4 with a release bios, and if the results are different to note that.
As far as the time taken to prepare this round up, much less time could have been used running bench mark after benchmark that shows apprx the same performance, and I would expect it take more than a day to write up such a comprehensive review. To take a few days to do testing that can benefit people who will base their buying decisons on your results, I think would be worth while.
I am happy that I could pinpoint the problem with the Chaintech VnF4 Ultra results, as you may have guessed I am quite familliar with it. In the past, Anandtech has always explained why a beta bios was being used, I guess that it wasn't noted this time because you felt rushed.
PS I know the DFI's are excellent boards, but their site lists a march date for their most recent bios, so maybe you should have used that one instead of their latest and greatest TCCD overclocking beta bios, and since you were using a beta, you should, again, have listed why.
I'm sorry, saying it took more than a day is not good enough for the anandtech standards that have been so high for so long.
Wesley Fink - Wednesday, July 6, 2005 - link
We have corrected the CPU and Memory voltage adjustments for the Abit AN8 Fatal1ty. This version only has voltage adjustments to 2.8V for memory, while the later Ultra and SLI versions do support memory voltages to 3.55V.Palek - Wednesday, July 6, 2005 - link
Wesley, that would be "proofreading" - one word! ;) Is that a job offer? :)#41, TheGlassman, you shouldn't have unreasonable expectations. I'm sure this review took far more than a day to put together, so of course some of the BIOSes used will not be the latest and the greatest. Adding three different types of RAM to the mix would require even more time. Then if you want to test them with different divider etc. settings, suddenly you have over a hundred combinations, a benchmarking nightmare. You have to draw the line somewhere. This was not an article focused on overclocking, but a comparison of 7 motherboards. I would have liked to see the new Abit boards included as well, but I guess that review will come soon enough, too.