Sunbeam Trio

Still, at the relatively cheap end of the spectrum is Sunbeam's Trio case. As the time of writing, it was available for as little as $70 online. For the most part, the Trio looks more like a gamer's case, but this doesn't mean that it couldn't appeal to a slightly more mature crowd either.


Click to enlarge.

Finished in a glossy piano-black shine not unlike the X-Cruiser, the Trio is another case where keeping a cotton cloth on hand to keep it clean will make a big difference. The front bezel is entirely made of plastic, except for the metal ventilation grill on the right.

The typical auxiliary ports are on the right side of the case, but there are also volume controls for the headphone out and microphone input, which is definitely a nice touch.

Opening the large plastic front door gives us a look at the four optical bays, two floppy bays, power and reset buttons and LEDs.


Click to enlarge.

Also notice how, like the X-Cruiser, the Trio has three blue gauges monitoring volume, fan speed, and temperature. In the following close-up, note how this case's gauges are better labeled than the ones on the Aspire.

Moving on, let's take a look at the rear of this case.

There are a couple of things to point out about the back exhaust, the first of which is the perforation. While the holes certainly look big enough, there's actually just about as much metal here as space for air to pass through, which is a less efficient design than the spacious hexagon cutouts that other cases have in this roundup.


Click to enlarge.

Luckily, it does have something going for it that most of these cases do not, and that is the option of running either dual 80mm or a single 120mm fan. The trio does include a 120mm one though, so unless there's a much better use for it elsewhere, it probably makes the most sense just to leave it there.

To get a better idea of what the Trio looks like from the side, we're going to jump immediately to some pictures of the case with the test bed fully installed.

DynaPower F3323 (cont’d) Sunbeam Trio (cont’d)
Comments Locked

48 Comments

View All Comments

  • RupertS - Thursday, September 8, 2005 - link

    The power supply is a good part of the total value of the case. Also, some of the cases may work better (cooling, sound) with the power supply they come with.

    Hard to compare prices like this.
  • johnsonx - Thursday, September 8, 2005 - link

    Ditto that... this complaint has been leveled before of course:

    Anandtech should at least mention what power supply is (or can be) included with the case, and give some sort of subjective rating of same. For example, the Aspire case is most often available with a 420W power supply (usually a mere $15 or so more than the PS-less version), but I've heard it's crap... but maybe it isn't; I'd like Anandtech to tell me.

    Likewise, the Sonata II ALWAYS (AFAIK) includes a SmartPower 2.0 450... doesn't that add significantly to the value equation? (granted, it'd be better if it were a TruePower 380 like the old Sonata, but a SmartPower 2.0 is nothing to scorn)

  • ElFenix - Thursday, September 8, 2005 - link

    everyone should read the reviews on SPCR before setting up a system on this case. the reviews are very thorough and tests it in multiple configurations, and it turns out there are things you can do to improve its thermal performance by quite a bit (such as duct taping over the holes next to the power supply)
  • flatblastard - Thursday, September 8, 2005 - link

    Duct tape on a brand new case? I don't think so..... Well, I personally wouldn't do it, but for modders/OCers I guess it might make sense.
  • fass mut - Thursday, September 8, 2005 - link

    what's the link to the article?
  • ElFenix - Thursday, September 8, 2005 - link

    all three articles, the first is over main features, the second is an absolutely silent computer, and the third is more mainstream rigs

    http://www.silentpcreview.com/article249-page1.htm...">http://www.silentpcreview.com/article249-page1.htm...
    http://www.silentpcreview.com/article254-page1.htm...">http://www.silentpcreview.com/article254-page1.htm...
    http://www.silentpcreview.com/article255-page1.htm...">http://www.silentpcreview.com/article255-page1.htm...
  • jonp - Thursday, September 8, 2005 - link

    Doesn't an ATX extension cable for $4 cover the power supply to motherboard distance concern? Granted, Antec could have included it with the case; but it's NO big deal to resolve. Shouldn't be an issued when deciding.
  • mjz - Thursday, September 8, 2005 - link

    i hate lian li cases. I spent probably 200 dollars on their case (2 years ago) and it vibrates too much, the sound is pissing me off. I guess it can't handle my raptor or something.
  • Tamale - Thursday, September 8, 2005 - link

    I too agree that way too many of these cases are kinda ridiculous looking, but someone said it best when they said "the Eclipse must look better in person"... it really does. I liken it to those fancy cd players from places like brookstone and the sharper image..

    It's flashy, sure, but at least it's kinda 'classy flashy', if you know what I mean. If that kinda look still doesn't please you at all, there's always cases like the P-180 ;)
  • mkruer - Thursday, September 8, 2005 - link

    Considering that I have a PC-V2000 Plus. I am in a unique position to voice my opinion for everyone reading this thread. I will say that yes the cases Lian Li cases are overly expensive, but considering that they are the only “all aluminum” case manufacture, and they have arguably the best design, they can get away with it. The main issues with an “all aluminum” case is that because aluminum is light then steal and yet does not have the absorbing capacity of plastic, aluminum as rule of thumb tends to be louder. However there are three things you can do o improve the noise ratio of the system. First is to install sound absorbing foam in the case. This will cut down on high pitched noise. Next is to install quieter fans. The Lian Li fans are good, but they are only about average in the noise to air ratio. Finally and this is the biggest thing. In order to cut down on the “wan wan” resonance sound coming form the case you need to suspend the drive is a sling and not it the mounting bays. This by far reduces the most noise.

Log in

Don't have an account? Sign up now