ATI Radeon X800 GT: A Quality Mid-range Solution
by Josh Venning on September 28, 2005 12:05 AM EST- Posted in
- GPUs
Everquest II Performance
Here now is a game where the X800 GT really shines. Granted, the framerates are all rather low (besides the X800 XT); however, EQ2 is an RPG and doesn't require 60+ FPS. We'd say that 30 FPS is what you should look for in EQ2 for a playable experience.
Keep in mind that Everquest 2 probably takes the win in our opinion as the most demanding game out right now in terms of graphics requirements. Also, there are different overall quality settings in the game options such as "ultra-high", "very-high", etc. and we ran these tests on the "very-high" setting. With the quality setting turned down a notch or two, the game runs very smoothly, and if EQ2 is your game of choice, you will likely be pleased by the performance that the X800 GT has to offer. You might also consider dropping to 1024x768 for EQ2 - provided that you're not using an LCD, that is.
Here now is a game where the X800 GT really shines. Granted, the framerates are all rather low (besides the X800 XT); however, EQ2 is an RPG and doesn't require 60+ FPS. We'd say that 30 FPS is what you should look for in EQ2 for a playable experience.
Keep in mind that Everquest 2 probably takes the win in our opinion as the most demanding game out right now in terms of graphics requirements. Also, there are different overall quality settings in the game options such as "ultra-high", "very-high", etc. and we ran these tests on the "very-high" setting. With the quality setting turned down a notch or two, the game runs very smoothly, and if EQ2 is your game of choice, you will likely be pleased by the performance that the X800 GT has to offer. You might also consider dropping to 1024x768 for EQ2 - provided that you're not using an LCD, that is.
Facebook
Twitter
RSS
48 Comments
View All Comments
drinkmorejava - Wednesday, September 28, 2005 - link
But how does the 6600gt compare in SCCT with SM3.0 on. It's not an unbiased test if you're not using the cards to the best of their abilities. SM3 was built to give a performance boost that would encourage people to by cards with it, no sense in leaving this out.lifeguard1999 - Wednesday, September 28, 2005 - link
Why?coldpower27 - Wednesday, September 28, 2005 - link
Remember the 6800 Strength lies in situations where AA & AF are applied. it's overall pixel fillrate is only 3.9GPixel compare to the 6600 GT 4.0GPixel, if not memory bandwidth limited, there is potential for 6600 GT to outperform 6800 Vanilla. Vertex Shader power doesn't matter also all that much as the amount 6600 GT has seems to be sufficient. Pixle Shader fillrate is one of the most important indicators of performance when comparing across the same architecture.Cybercat - Wednesday, September 28, 2005 - link
I was wondering about this myself. I've seen a number of benchmarks from other sources showing the 6800 to be the better performer. I hope Josh used a genuine NV41/42 6800 rather than just taking a NV45 and cutting it down.Kagjes - Wednesday, September 28, 2005 - link
hmm, could someone plz tell me what's the overclocking like with 6800s? is it worth buying at all?DerekWilson - Wednesday, September 28, 2005 - link
they have different strengthsjkostans - Sunday, September 25, 2005 - link
I just built a computer for a buddy a X800 GT 256MB card plus a A64 3500+ in it. The 3500+ overclocked to 2.63GHz prime95 stable, and the video card was running solid at 580Mhz Core 595Mhz Memory and looped 3dmark tests all night without a single problem. Probably the best bang for the buck system I've built so far. Performance wise better than the 3800+ and X800 XL system I built prior to it (stock speeds) and a lot cheaper.Thatguy97 - Wednesday, June 24, 2015 - link
dont see how the x800 gt was a quality mid range solution as the x800 xl and x800 were much better cards