DDR400/2.4GHz Performance

DDR400 (2.4GHz) Gaming Performance

DDR400 (2.4GHz) Standard (Buffered) Memory Test

DDR400 (2.4Ghz) UNBuffered Memory Test

DDR400 (2.4GHz) Calculation Performance

DDR400 (2.4GHz) Gaming Performance


Performance Comparisons DDR436/2.4GHz Performance
Comments Locked

40 Comments

View All Comments

  • Slaimus - Tuesday, October 11, 2005 - link

    Does 4 single sided 512MB sticks behave the same as 2 double sided 1GB sticks?
  • eastvillager - Tuesday, October 11, 2005 - link

    Why would you buy these when the 2-3-2-5 sticks are readily available?
  • Wesley Fink - Tuesday, October 11, 2005 - link

    If you read the review you will see that ALL THREE of the 1GB dimms ran at 2-3-2 at DDR400 to DDR440 or so. They will all run 2-3-2-5, but we have shown in previous tests the the nForce 4 is fastest running a tRAS of 6 or 7. We ran 2-3-2-7 because it is faster than 2-3-2-5 on the nForce4. Try it for yourslef with memtest86 and differnet tRAS.
  • Sunrise089 - Tuesday, October 11, 2005 - link

    Possible minor typos aside, this article is a great change of pace from some of the recent technical write-ups here on Anandtech(cough:R520:cough). The quality of writing as well as the attempt to put the parts in perspective and give the big picture is much appreciated. With so many sites out there, I can go anywhere for simple RAM benchmarks, but for me it is much harder to find informed discussions about why the part being reviewed is a good idea/choice or not. I really felt this side of the story was lacking in the X1800 reviews and am glad to see it here.
  • Houdani - Tuesday, October 11, 2005 - link

    Page 3:
    quote:

    our overclocking clock frequency went up to DDR500 - 30 points higher.

    I think you meant DDR550.

    Page 4:
    In your table of memory, you list the 3 new sticks as 2x512. I think you meant 2x1024.
  • Wesley Fink - Tuesday, October 11, 2005 - link

    Corrected. Thanks for bringing these to us. It's funny that they looked just fine at 3AM :-)
  • Doormat - Tuesday, October 11, 2005 - link

    Whether its worth it or not to invest heavily (these pieces arent cheap) in DDR1 tech if you've already got a pair of fast running 2x512MB sticks. You'll just have to buy DDR2 sticks in a year if you want the fastest stuff (an A64 M2-socket based chip).
  • emilyek - Tuesday, October 11, 2005 - link

    Lame. Why not a big review on the many available 2 and 2.5 cas DDR 400 sticks? The Geil, Patriot, OCZ, Gskill, and Corsair already top out at about 1k FSB when loosed up, and the timings on these RAMS sucks anyway.
  • DrMrLordX - Tuesday, October 11, 2005 - link

    They've said it before, and I'll say it again: you just can't add every available DIMM variety to RAM tests. There's too much on the market, and many of the budget RAM types have wildly variable quality and performance.
  • RockSolid - Tuesday, October 11, 2005 - link

    The RamGuy link on Page 5 is incorrect.

Log in

Don't have an account? Sign up now