DFI LANParty UT RDX200: Board Layout
DFI has made sure that you still recognize the LANParty UT box - using the same theme that worked well on their nForce4 series.
Instead of the blue color used for NVIDIA, the ATI chipset RDX200 is done in ATI reds. UT is used for the full LANParty boards without the full LANParty package. Everything board-related is here with this 6-layer board, but you will not find a FrontX box or nylon carrier. You will, however, find all the matching UV reactive cables that distinguish a LAN P arty motherboard.
In addition to all the necessary cables with yellow UV sleeves, you will find an updated Karajan audio module. The significant update here is the Azalia High Definition audio chip that is isolated on the module for improved signal-to-noise performance. This is the first retail AMD motherboard to feature Azalia HD, which is a prominent and unique feature of the ATI Rx480/482 chipset.
The Karajan module integrates into the rear IO ports, providing 6 mini jacks for the audio system.
Click to enlarge.
Those familiar with DFI LANParty boards will immediately recognize the black color scheme with Dayglo yellow and orange slots and connectors. Some buyers love the color scheme and look for side-window cases and UV lights to show it off. Others wish that DFI used something a bit more sedate. Whatever you think of the color scheme, our past experience has been that underneath the color is an incredibly full-featured motherboard with adjustments not available on any other motherboard. DFI tells us that all capacitors are 100% Japanese to assure the highest quality.
Layout is unusual compared to other recent motherboards, with the 4 DIMM slots located between the CPU and IO ports. While we have not seen this location used on other boards, in practice, it works very well to keep air flowing and components cool.
The 24-pin and 8-pin/4-pin power connector are together at the right board edge. You can use either standard 4-pin or the more robust 8-pin connector on the DFI. This location keeps bulky power cords out of the way of other components.
IDE and floppy connectors are ideally located on the right edge of the board - where they belong. We are grateful that DFI did not follow recent practice and place the floppy port at the bottom of the board. The floppy is a side edge connector, so you may need to install the floppy cable before mounting the board in smaller cases.
In addition to the 4 SATA connectors provided by the ATI SB450 south bridge, DFI has added 4 more SATA ports powered by a Silicon Image 3114 controller. The puzzle here is that all 8 ports are SATA1. We have to wonder why DFI bothered to add more SATA ports when they all end up being SATA 1 - no SATA2 ports.
Momentary switches for power and reset have almost become a trademark with DFI LANParty motherboards and the RDX200 is no exception. The battery, switches and "Clear CMOS" jumper are all clustered in the same area at the bottom right corner of the board.
DFI also included Firewire powered by the well-regarded VIA VT6307 chipset. Dual Gigabit LAN is also a feature, but only one LAN port is the faster PCI Express.
You should also consider what is
not on the DFI RDX200. There is no paddle card to fumble with in changing from one to two video cards. The switching is automatic, and unlike other auto-switch video solutions, it doesn't appear to hamper the board's overclocking abilities.
Facebook
Twitter
RSS
48 Comments
View All Comments
JarredWalton - Tuesday, October 18, 2005 - link
SATA2 actually only increases the bandwidth from 1.5Gbps to 3.0Gbps. Since sustained transfer rates are still maxing out at around 100MBps (0.8Gbps), and that's only with RAID-0 and two drives... well, SATA2 isn't a huge deal. I don't recall seeing whether the ATI chipset supports NCQ, which is of course in a similar boat.USB2.0 performance is only really important if you use an external HDD. Most flash cards and other USB2.0 devices don't come anywhere near 60MBps, as Anand's USB Flash Drive article showed. USB2.0 video devices might also have trouble, though - not sure what the throughput on those is. 150Mbps should be enough, really. Isn't 1080i only a 20Mbps stream? (Or is it 20MBps?)
haelduksf - Wednesday, October 19, 2005 - link
Err...that's what I meant, 3 Gbps, not 300Mbps. in either case, it's quite useless, and will be for the forseeable future.erinlegault - Tuesday, October 18, 2005 - link
I would have been nice if DFI would have used the ULI southbridge. Maybe DFI will include the ULI M1575 for the DFI LANParty UT RDX200 Expert motherboard (that's if they do the same as they've done with the NF4 board).DigitalFreak - Tuesday, October 18, 2005 - link
Anyone else think this board is a bit lacking feature wise for the $230 asking price? If you REALLY want Crossfire, then you'll need this board. Otherwise, the Nforce4 seems to be the better choice. I just can't believe that DFI is asking so much $$$ for this!mongoosesRawesome - Tuesday, October 18, 2005 - link
price will likely come down pretty quickly. remember how much the nforce 4 sli boards were when they came out?I've also heard rumors that DFI is going to release a new board with an updated southbridge in a few weeks.
bob661 - Tuesday, October 18, 2005 - link
Only if people buy these things otherwise there would be no reason to lower prices.coomar - Tuesday, October 18, 2005 - link
226-2-2-2-7-2T is going to be faster than 206-2-2-2-7-1Tvdimm and vcore voltage choices were very impressive
how good is azalia compared to good soundcards/ decoders?
muffin - Tuesday, October 18, 2005 - link
DFI was not the first! EQS have had a board on sale at overclock.co.uk for a couple of weeks now. Its the same as the (as yet unreleased) Sapphire board, made by the same people.Linky: http://www.overclock.co.uk/customer/product.php?pr...">http://www.overclock.co.uk/customer/product.php?pr...
Its been on sale for a while guys, pay attention. Theres an Inquirer story about it too :/
erinlegault - Tuesday, October 18, 2005 - link
There is data for x850XT missing in the Half-Life 2, Wolfenstein, Aquamark and UT2004Wesley Fink - Tuesday, October 18, 2005 - link
Due to time constraints we did not run a full set of Crossfire benchmarks. We were mainly trying to confirm Crossfire worked as it should on the DFI. We therefore ran those benches where more powerful video makes a difference and left out those where the video power makes little difference. You can find a full suite of Crossfire, 7800GTX, and other graphics benchches in our Crossfire Graphics launch reviews under the Video tab at the top of the page.We did intend to run Half Life 2 but our benchmarks no longer work with the new build Steam forces on you. We are in the process of updating the HL2 benchmark unless some of you tech wizards know of an HL2 benchmark that will definitely work with the new HL2 version.