Basic Features: Asus A8N32-SLI Deluxe

 Asus A8N32-SLI Deluxe
CPU Interface Socket 939 Athlon 64
Chipset NVIDIA nForce SPP 100 Northbridge
NVIDIA nForce4 SLI Southbridge
Bus Speeds 200 to 400MHz in 1MHz Increments
Memory Speeds DDR200, 266, 333, 366, 400
(433, 466, 500 with Rev. E AMD)
PCIe Speeds 100-200MHz on 1MHz Increments
NB to SB Frequency 200-300MHz in 1MHz increments
PEG Link Mode Auto, Disabled, Normal, Fast, Faster
PCI/AGP Fixed at 33/66
Core Voltage Auto, 1.0V to 1.5625V in 0.0125V increments
PLUS 0.2V in vCore Boost
(Maximum vCore 1.7625V)
CPU Clock Multiplier 4x-25x in 0.5X increments
DRAM Voltage Auto, 2.6V to 3.2V in .05v increments
HyperTransport Frequency 1000MHz (1GHz)
HyperTransport Multiplier Auto, 200MHz to 1600MHz in 200MHz increments
SB to NB Frequency 200MHz to 1600MHz in 200MHz increments
HyperTransport (LDT) Voltage Normal, +0.2V
Northbridge Voltage Normal, +0.2V
Southbridge Voltage Normal, +0.2V
Memory Slots Four 184-pin DDR DIMM Slots
Dual-Channel Configuration
Regular Unbuffered Memory to 4GB Total
Expansion Slots 2 PCIe x16
1 PCIe x4
3 PCI Slots
SLI Full Dual x16 SLI
Onboard SATA/RAID 4 SATA2 Drives by nF4 (RAID 0, 1, JBOD)
PLUS 2 SATA2 Drives by Sil 3132
Onboard IDE/IDE RAID Two Standard ATA133/100/66 (4 drives)
Onboard USB 2.0/IEEE-1394 10 USB 2.0 Ports by nF4 (9 on Wi-Fi model)
2 1394A Ports by TiTI
Onboard LAN 2 Gigabit Ethernet PCIe Ethernet by Marvell 88E1111 PHY, Marvell 88E8053
PLUS Wireless LAN 54 Mbps on WiFi Model
Onboard Audio AC '97 Realtek ALC850Codec
8-Channel Audio with 6 Auto-Sense Jacks
Coaxial and Digital SPDIF on back IO
BIOS Revision AMI 0301 (9/30/05)

Yes, this is an Asus board, and not a DFI or Abit. The feature set and adjustments are extremely broad compared to any board. The names of the options are sometimes a little different and the adjustment ranges are often set up differently, but everything that an enthusiast needs to get the most from the Asus A8N32-SLI is here.

This Asus provides memory voltage all the way to 3.2V, among the best that we have ever seen from a tier 1 board maker. This should be an adequate range for any memory on the market other than the disappearing VX and Redline high-voltage modules from OCZ and Mushkin. While nothing on the market really comes close to the DFI memory voltage range to 4V, adjustments to 3.2V are more than adequate for current 2 GB modules and any other current DDR RAM.

Memory adjustments are the broadest that we have seen on an Asus board. The ranges are not always as extensive as a DFI or ATI Reference board, but the assortment of control options is just as wide as you will find on any production board.

We know of no other current AMD motherboard with HTT adjustments to 1600. However, don't get too excited by this. We quickly found that the HTT settings above 1000 don't work and the board freezes when they are selected. When we asked Asus about these expanded settings, they told us that they were included for a future enhancement of the AMD on-processor memory controller, which may or may not happen based on the latest information that they have received. The settings above 1000 don't work with current processors, even with the E6 memory controller.

CAS 1.5 is an option in the BIOS, but Asus tells us that it is really a feature for extracting the best performance from DDR333 memory. Sure enough, we couldn't get it to work with DDR400. However, it worked fine with DDR400 memory at DDR333 - providing an interesting option for extreme overclocking.

Asus A8N32-SLI Deluxe: Board Layout Overclocking: Asus A8N32-SLI Deluxe
Comments Locked

95 Comments

View All Comments

  • Wesley Fink - Friday, November 4, 2005 - link

    We did not test with an XP90 or XP120. What I can tell you is the fan on our Thermaltake heatsink (in the picture of the optional HS fan in the review) is an 80mm. I just measured and there is still an additional 1/2" clearnance to theheatsink and heatpipes on the IO and bottom sides and an additional 1" to the heatsink at the top of the socket. My guess based on these measurements is that an XP90 should be fine, but I'm not sure about an XP120.
  • Rike - Friday, November 4, 2005 - link

    Regarding the HS, is it just me or is there a lot of dust in the fins?
  • Peldor - Friday, November 4, 2005 - link

    I don't think you should be ripping on "other" sites for claiming x16 lane SLI has big benefits over x8, when http://www.anandtech.com/mb/showdoc.aspx?i=2580&am...">Anandtech showed the same thing on a P4 board. You certainly didn't make it clear in that article that the 81.85 drivers were the primary reason for the higher scores.
  • wbloon - Sunday, December 18, 2005 - link

    Yes they did, you must have only skimmed the article. Go back and do your homework before showing your lassitude, dude.
  • Gary Key - Friday, November 4, 2005 - link

    I think the Intel article was very clear about indicating several factors played into the results we witnessed-
    quote:

    ...This allows the option to support two full-bandwidth 16-lane PCI Express links for graphics compared to a single 16-lane PCI Express link or split into two full-bandwidth 8-lane PCI Express links previously. While this doubles the bandwidth of the previous chipset configuration, in reality, the actual performance improvements are dependent upon the CPU, GPU, applications, and driver sets used. We witnessed anywhere from a 3% to 25% improvement in certain applications and were, at times, CPU constrained when utilizing a pair of 7800GTX video cards in SLI configuration at 1600x1200 resolutions and above.


    This topic has been discussed greatly in the comments section of the Intel article. I also stated in the game section the base improvement of the Asus board over the MSI board was 3% on average. I attribute this to bios optimizations, board design, and possibly improvements in the A3 stepping of the C19 Northbridge. The difference we found between the boards utilizing a very GPU intensive game (F.E.A.R.) ran from 6% to almost 11% indicating in this particular game an advantage/optimizations of the x16SLI over the X8SLI. The difference in going from 11% to 25% when implementing AA/AF is probably 90%+ due to the 81.85 driver set in my opinion. After statements from several readers I further clarified my statement on this increase in the article. However, I firmly believe with the right GPU setup and application there is a true improvement due to the additional bandwidth with the x16SLI.

    You cannot directly compare the Intel and AMD board due to the differences in the Northbridge chipset (C19 vs CK51) and the fact the memory controller is integrated in the Intel Northbridge instead of on the CPU in AMD's case. Wesley noticed differences in the single card benchmarks of up to 17% where mine were within the reported differences between the board designs (we will also test with a single core P4EE which should reduce the cpu bottleneck on the Intel board at higher resolutions). I have additional x8sli boards at this time and a revised bios for the MSI P4N that will be tested for a mini-update on this subject. We should see additional x16SLI boards in December for head to head tests utilizing the same chipset.

    Also, not all games or applications showed this type of increase as stated. We had some issues with the BF2 SLI benchmarks but should have those worked out shortly but I imagine this will be one game that also benefits directly from the x16SLI setup.

    Thank you. :)
  • Wesley Fink - Friday, November 4, 2005 - link

    There is a BIG difference between 0% to 8% SLI performance improvement and the 40% to 50% claimed in one review we saw. We thought it would be unprofessional to "name names", but with all the hype that 40% to 50% claim generated in many Forums we needed to address the facts head on.

    Our video review team plans an article looking at the performance increases in both the new nVidia and ATI drivers in an upcoming article. We have seen results on the newest games on this Asus with 81.85 as much as 40% higher than other nF4 boards tested with 78.01. However, most of that was drivers since we could only find increases of 0% to 8% in SLI and 0% to 17% in single 7800GTX. These are significant, but they aren't a 50% increase.
  • Hanners - Friday, November 4, 2005 - link

    Except, unlike the site I believe you are thinking of, you haven't done any testing (that I can see) using SLI AA, which is the one feature of NVIDIA's SLI feature set that will benefit greatly from the availability of two 'true' 16x PCI Express slots, as it transfers data via the PCI Express bus rather than using the inter-GPU connector as per other SLI modes.
  • Wesley Fink - Friday, November 4, 2005 - link

    You are correct that we did not select 8X or 16X AA in the nVidia driver, which I believe is the feature you are talking about. We selected anti-aliasing in the game, as we have in the past with our testing. We are looking into the possible impact of the "in-driver" AA on test results.
  • Wesley Fink - Friday, November 4, 2005 - link

    ALL of our game tests are 4XAA and 8XAF where that can be set - both SLI and single video. All game tests were run at 1600x1200. Please read the title bars and the Test Setup. This is clearly spelled out in the review.
  • Leper Messiah - Friday, November 4, 2005 - link

    oooh. I have my NF4 mobo. This thing is bought as soon as I see one in stock...

Log in

Don't have an account? Sign up now