ATI Radeon X800 GTO Mini Roundup: Sapphire, Connect3D, and PowerColor
by Josh Venning on December 26, 2005 12:05 AM EST- Posted in
- GPUs
Connect3D Radeon X800 GTO
Our next card is made by Connect3D, yet another known manufacturer of quality parts. This X800 GTO is much more similar to a “stock” X800 GTO than the previous two, but that doesn't mean that it's less impressive. We found that the Connect3D Radeon X800 GTO (while perhaps not having quite the potential of the GTO2) seems to be made for overclocking, and it does it incredibly well.
Our next card is made by Connect3D, yet another known manufacturer of quality parts. This X800 GTO is much more similar to a “stock” X800 GTO than the previous two, but that doesn't mean that it's less impressive. We found that the Connect3D Radeon X800 GTO (while perhaps not having quite the potential of the GTO2) seems to be made for overclocking, and it does it incredibly well.
Facebook
Twitter
RSS
27 Comments
View All Comments
Le Québécois - Monday, December 26, 2005 - link
Is it just me or the PowerColor GTO 16 has the exact same spec as the standart ATI Radeon X800XL?AtaStrumf - Monday, December 26, 2005 - link
Almost. X800XL runs at 400/500 vs. 400/490 of the GTO 16. They also both use the same .11 mikron R430 chip.mamisano - Monday, December 26, 2005 - link
Wow, you guys are getting really soft lately. The GTO2's main claim to fame is the ability to unlock the 4 extra pipelines and the tremendous overclocking headroom available. At least give it a try, it can always be flashed back if you experience problems.Second, did you actually remove any of the HS units to determine the actual core installed on each card? That and a list of brand/speed of memory used on each one would have been very beneficial to the overall review.
Seems to be another in a line of reviews with decreasing quality.
AtaStrumf - Monday, December 26, 2005 - link
I absolutely agree! Very low quality review and VERY, VERY late!!!Zoomer - Monday, December 26, 2005 - link
I research all of these cards before settling with the c3d gto - and I would have gotten the gto2 if it was avaliable.Sapphire GTO2
R480
Samsung 1.6ns
C3D GTO
R423
Samsung 2.0ns
PowerColor
R430
Samsung 2.0ns
An article at anandtech commented on why the Powercolor card (the R430) can't hit high clocks - although it uses a smaller process, the 130nm uses a low k process. The 110nm process does NOT. The article goes on to say that this shrink was to cut costs, at the expense of clock speed.
However, it is interesting to note that the die shrink didn't do anything to reduce power draw. An investigation into the voltages the R430 is running at is in order. :)
One more thing to note - the c3d has VIVO, with a rage theatre chip soldered (as usual) on the board.
I can't remember the ones for ultimtate, but the fireblade should also be using 1.6ns rams.
tuteja1986 - Monday, December 26, 2005 - link
I wonder why anandtech never did it earlier ;(coldpower27 - Monday, December 26, 2005 - link
At least the different manufacturer made it interesting, and customized the boards a little bit to differentiate from one another and not stick to the reference design.The 6800 GS is quite the competitor for the X800 GTO, and from my persepctive is a better buy if you want something straight out of the box save for the Powercolor X800 GTO 16. Though there is also the XFX Edition clocked at 485/1100 to worry about.