Final Words

And there you have it, quite possibly the most unimpressive launch from AMD (from a performance perspective), but given what we had already seen prior to today there shouldn't be any surprises. The introduction of the Athlon 64 FX-62 means that there is an even faster alternative for those looking to spend as much as possible on a desktop or workstation CPU, but the new 5000+ isn't really all that appealing, especially if you're a gamer.

Socket-AM2 is unfortunately not about performance, and much about bringing a unified memory platform not only to AMD but to the industry as a whole. With all desktop AMD CPUs sharing a single socket end users and OEMs alike will have a much easier job when building AMD systems. On a much more macro scale, with both AMD and Intel using DDR2 memory prices should be driven down even further and switching between platforms will no longer require throwing away your entire memory investment.

The big story with Socket-AM2 is really the introduction of the new Energy Efficient and Energy Efficient Small Form Factor CPUs, but unfortunately those are not yet available. Instead, today's launch ends up being much more about the chipsets being used on AM2 motherboards rather than the CPUs. Later today we will be looking at NVIDIA's nForce 500 series and how the evolution of the most popular AMD chipset has taken to the Socket-AM2 platform.

It is ironic and equally unfortunate for AMD that on the eve of Intel finally getting its act together, that the Socket-AM2 launch is so devoid of any sort of performance improvements. It's clear that AMD's architecture just simply isn't starved of memory bandwidth at this point, and it will take either higher clock speeds or architectural improvements to make the move to DDR2 necessary. We are happy with the fact that AMD at least kept memory latency down while moving to DDR2, but at this point there's simply no use for the bandwidth.

In the coming months we will see the official launch of Intel's Core 2 Duo processors, based on the Conroe core. Only time will tell how availability will affect pricing of those CPUs, but Intel is quite eager to release them. AMD is also awaiting the launch of Core 2 Duo, though for different reasons; in fact one of its stipulations for sending out Socket-AM2 review kits was that the CPUs not be compared to Conroe. We understood and agreed with AMD's stance on the issue, simply because Core 2 Duo (Conroe) isn't shipping yet while AM2 is, but we do get a sense of concern whenever Conroe is brought up around AMD.

AMD does have one last trick up its sleeve before the end of the year, and you will hear about it in June. It's not K8L and it's not going to affect the majority of people, but it is an interesting stop gap solution for the high end in 2006...

Power Consumption
Comments Locked

83 Comments

View All Comments

  • peternelson - Tuesday, May 23, 2006 - link


    I see no benchmarking in 64 bit mode.

    This is the future, and for maths, Intel's 64 bit was more of a lame copy of AMD 64 bit performance.

    In future this will be increasingly important so even if 32 bit performances are comparable, I'd want to make sure the picture is the same running 64 bit apps.


    Also you summarise "same performance, faster memory, less power". True, but you FORGET one of the main benefits: Pacifica Virtualisation.

    True hardware virtualisation adds to the actual WORK you can keep that processor busy with. It saves time by letting you switch OS instances without rebooting timewasting.

    As it is hardware based VT you should even be able to virtualise an UNMODIFIED OS like Win XP, maybe even Vista!

    So please play with Xen3.

    As you say virtualisation "works" then it is a BIG factor for me in choosing AM2 over 939, (all other things being equal).

    Also the fastest 939 chips have been produced, and AM2 is reaching higher models now.

    So if you want the VERY fastest, it is only available on AM2.

    Don't forget: Not just performance, but performance PER WATT. For these AM2 chips that is similar to 939.

    However, the announcement of 65W EE and EVEN 35W SFF EE!!! are significant compared to the standard 89W

    Intel seem to be positioning Conroe as being "33% better" on performance per watt. However, Conroe isn't even here but when it is, it may not be able to compete with AMD low power offerings.

    Also consider the whole system for conroe vs AMD. Because that AMD power INCLUDES the memory controller, whereas Intel doesn't. The whole motherboard etc may use less power.

    Also in terms of entire system cost, motherboards for AM2 appear to be a bit cheaper than their Intel equivalents, which may offset the current high prices of AMD processors.
  • fitten - Wednesday, May 24, 2006 - link

    You should check out the Woodcrest (server targeted Conroe core) previews for power measurements. Performance per Watt, Woodcrest wins (and will be available in 3 weeks)... Absolute power usage under load, Woodcrest wins... and note that the power measurements are for the complete system (video card and HDDs included). (Deep power conservation couldn't be tested on Woodcrest because the parts didn't have it enabled as they were engineering samples.)

    Also, check out the 64bit vs. 32bit comparisons in programs like Cinebench 9.5. Seems Woodcrest 64bit gives a nice boost there (showing that it isn't just a 'lame copy').

    You also seem to forget that Intel already has virtualization extensions out in currently shipping processors (much less Conroe+).

    As far as price, there have been price lists published already. High end Conroe parts are already listed for 1/2 the price of the high end AMD parts... at $500 that gives another $500 for purchase of a motherboard before it touches just the CPU cost of the AMD... I doubt that the motherboards will be that expensive.

    I have 7 AMD machines (four are Athlon64s or X2s) but right now, it looks like my next machine will be a Core2 one. AMD needs to get an answer out... soon. K8L isn't going to cut it. Sure, it'll be good at FPU but the vast majority of work done by CPUs is integer, which are what the majority of improvements are in Core2 (not that they don't have good FPU improvements). So, if you're in a government lab running FPU intensive simulations, K8L may be for you. If you're anyone else, K8L as it has been described looks kind of anemic and not a match for Core2.

    Maybe the real K8L will surprise us, who knows, but it is at least 6 months away (if not longer). By that time, Intel will already be 25% into it's 2-year cycle for the next Core derivative chip (probably farther, time between releases is set to 2-years). AMD looks to be in a bad situation right now... If they have something they're keeping secret, IMO, they need to at least tease us with it. K8L is not a tease, it's only slightly more than a stifled yawn. The longer they go without giving us something to look forward to, the more it looks like they are in major trouble.
  • Accord99 - Wednesday, May 24, 2006 - link

    [quote]Don't forget: Not just performance, but performance PER WATT. For these AM2 chips that is similar to 939.

    However, the announcement of 65W EE and EVEN 35W SFF EE!!! are significant compared to the standard 89W

    Intel seem to be positioning Conroe as being "33% better" on performance per watt. However, Conroe isn't even here but when it is, it may not be able to compete with AMD low power offerings. [/quote]
    Given that Woodcrest 3.0GHz has a TDP of 65W, which is borne out by power measurements conducted by Techreport and 2CPU, it's likely that a Conroe that matches the performance of the 35W X2 will at the very least, also match it in power.
  • soydios - Tuesday, May 23, 2006 - link

    AMD motherboards are less expensive because they don't have to put in a memory controller.

    AMD processors are more expensive for 2 reasons:
    - integrated memory controller takes up more die space (offset by cheaper motherboard)
    - AMD is still using 90nm on 200mm wafers, while Intel is using 65nm on 300mm wafers (Intel gets more CPUs per wafer bigtime)
  • peternelson - Tuesday, May 23, 2006 - link


    Sempron AM2 can do memory up to DDR2-667

    Dualcore AM2 can do memory up to DDR2-800

    However, PLEASE CHECK SINGLE CORE MEMORY SPEED (multiplier issues aside) which you say limited to 667 whereas I got the impression they can also do 800 like dualcores. Correct as necessary.
  • smitty3268 - Tuesday, May 23, 2006 - link

    I accidentally hit the "not worth reading" button, so I'm writing this comment to undo it :)
  • fikimiki - Tuesday, May 23, 2006 - link

    There are a couple of reasons for that:
    - K8L photo had a Z-RAM implemented, so they are using this kind of cache for a quite long time.
    - Shared L3 should help Athlon64 in matching Super-Pi and overall performance.
    - Usage of Z-RAM will reduce cache die size by 75% with no architectural changes.

    So FX-64 to beat fastest Core 2 just needs 4MB of cache...
    Easy trick but can be useful to survive till 65nm production...
  • Questar - Tuesday, May 23, 2006 - link

    quote:

    K8L photo had a Z-RAM implemented, so they are using this kind of cache for a quite long time.


    It's not going to be Z-RAM. Z-RAM won't even be in K8L.

    “We’ve looked at data from Innovative Silicon and it looks very promising. We still need to assure ourselves that this will work in our own application. We need to see how it scales and we need to make our own test vehicles,”

    Jones, an executive experienced in intellectual property licensing, also declined to comment on AMD’s timetable for introduction of Z-RAM but offered a more general perspective. “In the past it has been two years from when you sign a deal to when it is in production.”


    http://www.eetimes.com/news/latest/showArticle.jht...">http://www.eetimes.com/news/latest/showArticle.jht...
  • munky - Tuesday, May 23, 2006 - link

    I think the June trick AMD will pull out is the Clearspeed coprocessor. It definitely won't affect many users, but for those who do invest in the technology, it could provide a decent boost in number crunching power.
  • peternelson - Tuesday, May 23, 2006 - link


    Clearspeed are working on being one acceleration solution, yes, but the already launched acceleration on socket 940 is companies offering plug in Xilinx4 FPGA on hypertransport.

    I hope that gets re-engineered onto socket F pretty quickly. We may see announcements once socket F is actually launched in July.

Log in

Don't have an account? Sign up now