ATI Radeon HD 2900 XT: Calling a Spade a Spade
by Derek Wilson on May 14, 2007 12:04 PM EST- Posted in
- GPUs
Memory and Data Movement
Internal cache bandwidth on the R600 is 180GB/sec, while the internal memory bus, a second generation Ring Bus that builds on the X1k series idea, is able to deliver 100GB/sec of throughput in either read or write capacity. Memory offers nearly 110GB/sec, and AMD has stated that the internal bus is well matched to this due to the fact that some external bandwidth is wasted on overhead. The bottom line here is that a whole of data can move very quickly into and out of this hardware.
As we mentioned, R600 sees a reincarnation of the Ring Bus which can now handle both read and write data (X1k could only handle reads on the Ring Bus while writes were run through a crossbar). An independent DMA controller manages a bus comprised of multiple ring stops. There is one ring stop per pair of memory channels, and each ring stop is connected to two others via a 256 bit wide connection. The ring bus is 1024 wires total and can move read and write data in either direction to follow the shortest path around the ring to or from the memory client or memory.
The Ring Bus allows the PCI Express bus to be treated like just another memory device by the rest of the hardware. The DMA hardware is able to manage all the traffic to and from onboard and system memory in the same manner, and the memory clients on the GPU don't need to know what device they're talking to. The Ring Bus services 84 read clients and 70 write clients.
The external memory interface is 512-bit, doubling the X1k maximum of 256-bit and surpassing G80's 384-bit memory bus. Memory speeds are lower than on previous generation high end AMD hardware, but total bandwidth is higher. The net result is that AMD only slightly edges out G80 for memory bandwidth.
In implementing the 512-bit memory interface, AMD didn't want to add any more I/O pads to its package. They accomplished this by making use of a stacked I/O pad design. Unfortunately, details were vague on the implementation and methods used to keep clock speed high in spite of the proximity of other high frequency I/O.
Facebook
Twitter
RSS
86 Comments
View All Comments
mostlyprudent - Monday, May 14, 2007 - link
Frankly, neither the NVIDIA nor the AMD part at this price point is all that impressive an upgrade from the prior generations. We keep hearing that we will have to wait for DX10 titles to know the real performance of these cards, but I suspect that by the time DX10 titles are on the shelves we will have at least product line refreshes by both companies. Does anyone else feel like the graphics card industry is jerking our chains?johnsonx - Monday, May 14, 2007 - link
It seems pretty obvious that AMD needs a Radeon HD2900Pro to fill in the gap between the 2900XT and 2600XT. Use R600 silicon, give it 256Mb RAM with a 256-bit memory bus. Lower the clocks 15% so that power consumption will be lower, and so that chips that don't bin at full XT speeds can be used. Price at $250-$300. It would own the upper-midrange segment over the 8600GTS, and eat into the 8800GTS 320's lunch as well.GlassHouse69 - Monday, May 14, 2007 - link
If I know this, and YOU know this.... wouldnt anandtech? I see money under the table or utter stupidity at work at anand. I mean, I know that the .01+ version does a lot better in benches as well as the higher res with aa/af on sometimes get BETTER framerates than lower res, no aa/af settings. This is a driver thing. If I know this, you know this, anand must. I would rather admit to being corrupt rather than that stupid.GlassHouse69 - Monday, May 14, 2007 - link
wrong section. dt is doing that today it seems to a few peoplexfiver - Monday, May 14, 2007 - link
Hi, thank you for a really in depth review. While reading other 'earlier' reviews I remember a site using Catalyst 8.38 and reported performance improvements upto 14% from 8.37. Look forward to Anandtech's view on this.xfiver - Monday, May 14, 2007 - link
My apologies it was VR zone and 8.36 to 8.37 (not 8.38)GlassHouse69 - Monday, May 14, 2007 - link
If I know this, and YOU know this.... wouldnt anandtech? I see money under the table or utter stupidity at work at anand. I mean, I know that the .01+ version does a lot better in benches as well as the higher res with aa/af on sometimes get BETTER framerates than lower res, no aa/af settings. This is a driver thing. If I know this, you know this, anand must. I would rather admit to being corrupt rather than that stupid.Gary Key - Tuesday, May 15, 2007 - link
I have worked extensively with four 8.37 releases and now the 8.38 release for the upcoming P35 release article. The 8.37.4.2 alpha driver had the top performance in SM3.0 heavy apps but was not very stable with numerous games, especially under Vista. The released 8.37.4.3 driver on AMD's website is the most stable driver to date and has decent performance but nothing near the alpha 8.37 or beta 8.38. The 8.38s offer great benchmark performance in the 3DMarks, several games, and a couple of DX10 benchmarks from AMD.
However, the 8.38s more or less broke CrossFire, OpenGL, and video acceleration in Vista depending upon the app and IQ is not always perfect. While there is a great deal of promise in their performance and we see the potential, they are still Beta drivers that have a long ways to go in certain areas before their final release date of 5/23 (internal target).
That said, would you rather see impressive results in 3DMarks or have someone tell you the truth about the development progress or lack of it with the drivers. As much as I would like to see this card's performance improve immediately, it is what it is at this time with the released drivers. AMD/ATI will improve the performance of the card with better drivers but until they are released our only choice is to go with what they sent. We said the same thing about NVIDIA's early driver issues with the G80 so there are not any fanboys or people taking money under the table around here. You can put all the lipstick on a pig you want, but in the end, you still have a pig. ;-)
Anand Lal Shimpi - Monday, May 14, 2007 - link
There's nothing sinister going on, ATI gave us 8.37 to test with and told us to use it. We got 8.38 today and are currently testing it for a follow-up.Take care,
Anand
GlassHouse69 - Monday, May 14, 2007 - link
wow dood. you replied!Yes, I have been wondering about the ethics of your group here for about a year now. I felt this sorta slick leaning towards and masking thing goign on. Nice to see there is not.
Thanks for the 1000's of articles and tests!
-Mr. Glass