Noise Levels

For many enthusiasts upgrading cooling the goal is maximum stable overclock, and they will live with the inconvenience of a louder system. For other users silence is the most important factor, and these users will forgo maximum overclocking if that increases system noise levels.

The specified 39 dB(A) seems realistic for a 120mm high-output fan, but ZEROtherm did not specify whether this noise measurement was at low speed or high speed. We expected the specification was low-speed noise, so the high-speed noise measurement was an unknown.


Noise
Level - 6

Noise
Level - 24

Test Results at stock speed with the Nirvana are spectacular, but you can see from the noise graphs that the performance comes with the trade-off of higher noise. You can clearly see the high noise levels at the high-speed setting in these graphs, and you can definitely hear the fan. However, the sound and frequencies are not high-pitched or whining and are generally easy to tolerate. Closing the case brings the noise levels down to near silence even at top fan speed. For most users with a closed case noise at top fan speed will not be a large issue unless they are sleeping next to the operating PC.

At low speed, the fan is essentially silent, but we found performance average at low speed with no real threat to the top performers. You can dial a nice balance in with the fan controller of the Nirvana, however. Performance at around 2000RPM is almost the equal of that measured with the fan on high, and competitive with the best coolers tested. Even better, noise levels at ~2000RPM are generally not audible in our test room and will be acceptable to most users.

Overclocks at 2000RPM do not reach as high, topping out at 3.87GHz. Most will find this compromise of performance versus noise very acceptable, and this is still one of the best coolers we have tested no matter how you measure the performance and noise.

Cooling at Stock Speed Overclocking and Performance Scaling
Comments Locked

38 Comments

View All Comments

  • Wesley Fink - Thursday, January 17, 2008 - link

    It looks like we are going to have to do an article to educate readers on dBa sound levels. Noise does matter, but some of the fanatic quiet sites have completely distorted the meaning of noise levels so people no longer understand what they mean. 35 dBa is the noise level of a quiet suburban bedroom, away from traffic, at night. 45 dBa is considered a Quiet Room. Our sound floor in the new test environment is around this level. Our super quiet variable-fan-speed power supply is around this level at idle, but not while doing useful work. Unless you are running a fanless power supply measurements below this threshold are meaningless.
    Below is a chart from an acoustic engineering company. It is to help put in perspective what dBa sound levels actually mean.

    190 dBA Heavy weapons, 10 m behind the weapon (maximum level)
    180 dBA Toy pistol fired close to ear (maximum level)
    170 dBA Slap on the ear, fire cracker explodes on shoulder, small arms
    at a distance of 50 cm (maximum level)
    160 dBA Hammer stroke on brass tubing or steel plate at 1 m distance,
    airbag deployment very close at a distance of 30 cm (maximum level)
    150 dBA Hammer stroke in a smithy at 5 m distance (maximum level)
    130 dBA Loud hand clapping at 1 m distance (maximum level)
    120 dBA Whistle at 1 m distance, test run of a jet at 15 m distance
    Threshold of pain, above this fast-acting hearing damage in short action is possible
    115 dBA Take-off sound of planes at 10 m distance
    110 dBA Siren at 10 m distance, frequent sound level in discotheques and close
    to loudspeakers at rock concerts, violin close to the ear of an orchestra
    musicians (maximum level)
    105 dBA Chain saw at 1 m distance, banging car door at 1 m distance (maximum level),
    racing car at 40 m distance, possible level with music head phones
    100 dBA Frequent level with music via head phones, jack hammer at 10 m distance
    95 dBA Loud crying, hand circular saw at 1 m distance
    90 dBA Angle grinder outside at 1 m distance
    Over a duration of 40 hours a week hearing damage is possible
    85 dBA 2-stroke chain-saw at 10 m distance, loud WC flush at 1 m distance
    80 dBA Very loud traffic noise of passing lorries at 7.5 m distance,
    high traffic on an expressway at 25 m distance
    75 dBA Passing car at 7.5 m distance, un-silenced wood shredder at 10 m distance
    70 dBA Level close to a main road by day, quiet hair dryer at 1 m distance to ear
    65 dBA Bad risk of heart circulation disease at constant impact
    60 dBA Noisy lawn mower at 10 m distance
    55 dBA Low volume of radio or TV at 1 m distance, noisy vacuum cleaner at
    10 m distance
    50 dBA Refrigerator at 1 m distance, bird twitter outside at 15 m distance
    45 dBA Noise of normal living; talking, or radio in the background
    40 dBA Distraction when learning or concentration possible
    35 dBA Very quiet room fan at low speed at 1 m distance
    25 dBA Sound of breathing at 1 m distance
    0 dBA Auditory threshold


  • mustardman - Tuesday, January 22, 2008 - link

    Doesn't the chart list 35dBa as a "Very quiet room fan at 1m"? That's quite different than a quiet suburban bedroom. Everyone's threshold of annoying noise is different. I know I can not sleep with a fan, even low speed, in my room. So, a computer louder than that is unacceptable. Same reason I had to unplug my TiVo before sleeping. I eventually moved it out of the room.

    I'll check the other sites in addition to Anand, which I've been an avid reader for 8+ years.
  • strikeback03 - Thursday, January 17, 2008 - link

    I'd guess checking over at Silent PC Review would be more useful for you then, that is the type of testing they do. Anandtech has typically tried to show how it will impact a more typical system, which has fans.

    The room noise level for the tests was listed as 35dB, so a 25dB system would be probably be considered silent.
  • mustardman - Tuesday, January 22, 2008 - link

    Good point. I didn't see the room noise level. I guess they would be unable to test lower in that case.
  • Cardio - Thursday, January 17, 2008 - link

    Have this cooler and improved its performance by 1-3c with a little work. Bottom of heatsink is chrome plated like the rest of the cooler. Chrome is a poor heat transfer material. I removed the chrome by sanding with 200 grit wet/dry @ 100RPM on a varible speed rotating bench sander. Finishing with jewelers rouge on a sheeps wool buffer. Bottom plate is also much smoother as it was quite shiny before but showed some machine marks. Very pleased with cooler as it now achieves great results at even lower fan speed.
  • can - Monday, January 21, 2008 - link

    It's nickel, not chrome.
  • DukeN - Thursday, January 17, 2008 - link

    Why not included in any comparisons guys - this one is incredibly popular (and seems like a great bargain at ~ $25 or less)?

    Thanks.
  • aussiestilgar - Thursday, January 17, 2008 - link

    I've been waiting for AnandTech to review this cooler. I like that the test setup is very consistent which makes it easy to compare different coolers. I own this cooler and I must say its fantastic. It cools like the best of them and is extremely good value!
  • sotx - Thursday, January 17, 2008 - link

    um... just wondering here...

    the result for the ultra extreme 120 are obtained with or without the fan(s)?
  • Wesley Fink - Thursday, January 17, 2008 - link

    The Thermalright Ultra-120 Extreme was tested with the Scythe SFlex SFF21F 120mm fan. You can refer to the full review for test results by clicking on the cooling tab at the top of this page and searching for the 120 eXtreme review.

    Those results were run with our earlier test bed and the nVidia utility and they are not directly comparable to current test results. As we said in the review we retested the top coolers on our new test bed with CoreTemp and those are the reported results in this review.

Log in

Don't have an account? Sign up now