LaCie 324 Specifications and Appearance
| LaCie 324 Specifications | |
| Video Inputs | DVI with HDCP support 2 x HDMI Analog (VGA) |
| Panel Type | S-PVA (LCA 24B2) |
| Pixel Pitch | 0.270mm |
| Colors | 16.7 million (8-bit) 92% color gamut |
| Brightness | 400 cd/m2 |
| Contrast Ratio | 1000:1 Static |
| Response Time | 6ms GTG |
| Viewable Size | 24" diagonal |
| Resolution | 1920x1200 |
| Viewing Angle | 178 vertical/horizontal |
| Power Consumption | <140W max stated 88W max, 43W min measured |
| Power Savings | <2W |
| Screen Treatment | Matte (non-glossy) |
| Height-Adjustable | Yes - 2.75 inches |
| Tilt | Yes - 25 degrees back/3 degrees forward |
| Pivot | No |
| Swivel | Yes - 170 degrees left/right |
| VESA Wall Mounting | 100mm x 100mm |
| Dimensions w/ Base (WxHxD) | 22.28" x 16.45" x 8.97" lowered
(WxHxD) 22.28" x 19.21" x 8.97" raised (WxHxD) |
| Weight w/ Stand | 23.81 lbs. |
| Additional Features | (3) USB 2.0 - left (USB connection to PC required) 10-bit gamma correction DCDi Faroudja video processing |
| Audio | Audio in, Line out |
| Limited Warranty | 3 year parts and labor with advance replacement |
| Price | MSRP $1060 Online starting at ~$900 |
LaCie is a company known for catering to the professional imaging market. They also happen to offer a product called LaCie blue eye pro, which consists of both a colorimeter and calibration software. We were quite interested to see how the LaCie 324 stacks up to the competition, as we thought maybe we would finally see an LCD that provided good color accuracy prior calibration. Then we tested the Dell 2408WFP and discovered that there was already a reasonable solution in that area. So what exactly does LaCie bring to the table?
If we ignore the colorimeter and software for a moment -- those can be purchased separately from a LaCie display anyway -- the major difference between consumer LCDs and this professional LCD is the inclusion of 10-bit gamma correction and color lookup tables. If that actually sounds like something you might find useful, there's a good chance you're an imaging professional, in which case LaCie is certainly worth considering. For many users, the added cost is not likely to result in a noticeable improvement in image quality.
LaCie also uses Faroudja DCDi video processing, which can improve video playback. If you connect a Blu-ray player to the 324 using an HDMI cable, the Faroudja chip is supposed to help with noise reduction, de-interlacing, and the elimination of jaggies (depending on the video content). Unfortunately, we didn't have access to the appropriate hardware to test this aspect of the LCD.
 |
As this is an LCD designed for the professional market, it's no surprise that LaCie uses an S-PVA panel rather than a TN panel. Overall performance is similar to the Dell 2408WFP in terms of viewing angles, but unfortunately input lag is also just as bad (around 40ms).
The LaCie 324 includes two HDMI, one DVI, and one VGA input. It does have height adjustment and it will swivel about 170° to the left or right, but there is no pivot function. The height adjustment is also shorter than most other models, offering only 2.75" of vertical travel. The LaCie panel feels heavier and looks a bit bulkier than the competing offerings. That's not necessarily a bad thing if your primary concern is image quality, as it could be the added space is for something useful. All other things being equal, we would prefer a better stand that offers more vertical travel and a pivot function. At present, imaging professionals may have to choose function over form.
Facebook
Twitter
RSS
89 Comments
View All Comments
AnnonymousCoward - Friday, May 16, 2008 - link
I agree with Jarred on both accounts: you can't go wrong with the LP3065 or 3007WFP-HC, and input lag is far less than the lag time you experienced on the tablet. But if you're really sensitive to it, I'd avoid the Dell 2708, Dell 3008, Samsung 244T, and Samsung 245T, as those seem to have the worst lag of all.For unbeatable 24" color accuracy, the choice is obvious: NEC LCD2490WUXi (U.S.) or Hazro HZ24W (U.K.). I think they have mid-range lag (35ms?), which you probably wouldn't notice. The LP3065, 3007, and DoubleSight 26" are high quality IPS screens with very little lag, and for professional animation work, why not go bigger than 24"?
AnnonymousCoward - Sunday, May 11, 2008 - link
Jarred, I'm glad to see input lag drawing so much attention. You seem well aware of this, but I wanted to point out that the LP3065 was a poor choice for a reference monitor. It likely performs the same as the 3007-HC, which has measurements that bounce from 0-20ms; 3 increments on your scale (maybe 2 considering refresh rate). Some LCDs out there consistently measure close to 0ms.The editor's comments are completely out of context! ("They're huge, heavy, and require more power, and the best ones were made over five years ago. Sorry - LCDs are where everything is heading.") A heavy, power hungry, old, and obsolete 15" CRT would still be an ideal reference.
JarredWalton - Tuesday, May 13, 2008 - link
It would probably be a faster reference, but I'm not going to try to dig one up. Sorry. My place is crowded enough without keeping around an obsolete CRT. I sold off a couple 19" CRTs two years ago, and that was the last time I had one around for testing. I had to junk my old 21" CRT (from 1997) because I couldn't even give it away. 85 pounds now at the junk pile.As it stands, I will continue to use the LP3065 as a reference LCD. If I test an LCD that scores better than the LP3065, that's not a problem: it will have a negative "relative input lag" score. A CRT might very well score 20ms faster; my problem isn't with 0ms vs. 20ms (assuming CRTs can score 0ms); it's with 0ms vs. 60ms and perhaps 0ms vs. 40ms.
Personally, I'm certainly fine with the LP3065 - it is in use on my own gaming system and I've never been bothered with any discernible input lag. Image tearing caused by turning off VSYNC is a much bigger concern -- and that's one area where I'd like to see LCDs improve; a 120Hz refresh rate would help a lot. But then we'd need all new graphics cards and connectors to manage the data rates for 120Hz at 2560x1600.
AnnonymousCoward - Friday, May 16, 2008 - link
I hear ya on CRTs being too big to keep around :)I thought your measurements would have more variation, like by 40ms, since in many lag tests I've seen, measurements varied by 20ms. But your variations were 20ms, including both the reference and the one tested. I'd have to agree that a CRT isn't necessary, since the variations are under control (but I'll still add 11ms to the final numbers, as you've talked about). I'm surprised your 245T results weren't higher.
I have a 3007-HC and agree about the excessive tearing. And of course if the framerate can't stay above 60, I have to disable vsync and live with it. You gotta admit, it's quite nice that the 8800-series cards came out within a year of the 30"ers, and that those two separate technologies complement each other.
I wonder why the DoubleSight is going EOL, if it's such a great monitor and hot seller! Does that indicate customer return problems?
ShocWave - Wednesday, May 7, 2008 - link
Actually, I have a 2493HM.AV mode will display 720p and 1080p at the correct aspect ratio with overscan. What it basically does is fill the screen and crops out the sides.
It's not 1:1, but better then nothing.
JarredWalton - Wednesday, May 7, 2008 - link
I just don't understand why anyone would *want* overscan. AV Mode takes 720p stretched to fill the whole screen and then overscans it, right? Or are you saying it only crops the left and right sides? (I suppose I could check if I dig the LCD back out.)I'm not a stickler on aspect ratios, especially 16:9 stretched to fit 16:10 - the information is merely listed for those who really do care. I still think the Gateway has a better approach and overall better design. The Samsung however offers better color accuracy and a non-glossy panel for the same price. It's a close second in the TN panel contest (out of tested LCDs).
10e - Saturday, May 10, 2008 - link
Yes, that's exactly what it does. Takes the 720p/1080p image and "zooms" it so that it fills the screen vertically, but gets cut off at the sides. So you have a 16:10 "window" looking at a 16:9 screen that is missing some of the image left and right (about 5%)I use an image from the "TigerDave" site that shows exactly the amount of 720p and 1080p overscan a display will suffer. It does actually cut off a very small part of the image top and bottom as well.
I don't know what Samsung had in mind here. The newer revisions of the 245T and 275TPlus have a built in image setting for 16:9 now that supposedly works, so why they couldn't fix this in a technically newer design (2493HM) is confusing.
BattleRattle - Wednesday, May 7, 2008 - link
Do input lag against a CRT... Its the analog of the CRT that mattersviperboy2025 - Tuesday, May 6, 2008 - link
How does this compare to other reputable LCD monitors, I can't help but think anandtech is commercializing Dell displays. I mean how about the profesional serious from viewsonic, VP2650wb. They don't have a 24" oddly, but they do have a 26", VP2650wb, at a similar price as the dell 24", costing $615 at onsale.com with free shipping at the moment.The specs of this monitor seem to be better at everything than the dell, as it has 26" (compare to 24"), same resolution, 3ms response time, same 110% color gamut, 4000:1 contrast ration (compare to 3000:1), only difference I see are the inputs, since the professional serious doesn't carry TV inputs. But viewsonic does has a line of the X serious, all of which have hdmi, component, composite, and s video components, which i even doubt most people would use anyways since they would be attaching this to a computer not using it as a TV.
JarredWalton - Tuesday, May 6, 2008 - link
Drop contrast ratio and response time from that list, as they are meaningless figures. Color accuracy with "dynamic contrast" is horrible on all the displays I've tested - you can see the screen get darker/brighter as you watch, and I find it extremely distracting. So what you end up with is a 26" display at a good price. Is it better or worse than the Dell? In color accuracy, I'd bet a lot of money that it's worse without calibration.For the record, Dell displays are already "commercialized". The only thing wrong with the 2408WFP that I can see is input lag. I made this quite clear. If you're looking for a good 24" LCD for professional work, I'd recommend it without reservation. If you want a gaming LCD, probably look around more.
I can't review every LCD out there, in part because most companies don't send us samples. Viewsonic is one of those companies (I've emailed them at least six times in the past year without a single response). They can call something a "professional display" if they want, but that doesn't make it any more true than the "get rich quick" schemes you see floating around. It may or may not be a great LCD; I'd love to get one sent here for review. Note also that all it took was one email to LaCie and they jumped at the opportunity for this review. If you're looking for a true professional display and you want great support, I'd recommend them in a heartbeat. $300 more is a tough pill to swallow for casual use, but for professionals that should be a non-issue.