Age of Conan Performance

Age of Conan is a nice looking MMO that will soon have a DX10 path. For now, we tested everything on the highest settings except AA (set to 4x), and we enabled the advanced transparency option (which we assume is an in-game option for transparency AA, though we could be wrong).

Age of Conan


Click to Enlarge

Clearly, AMD is king in Age of Conan, with the single card performing well and terrific CrossFire scaling as well. The 4870 X2 will be quite fast here, at least in the DX9 path.

The R700 did perform a bit better here and there than multi-card Crossfire, but nothing to write home about. In general, performance between the two is very similar. And of course, if this performance holds until launch, AMD's R700 will be worth a nice premium over a single GTX 280.

Picking The Games Crysis Performance
Comments Locked

55 Comments

View All Comments

  • docmilo - Wednesday, July 16, 2008 - link

    This hotfix is a new set of drivers for the 4800 series. I installed them last night on my 4850 and when I run the Overdrive I reach 700mhz on the gpu stable.
  • docmilo - Wednesday, July 16, 2008 - link

    Well the link didn't work. Here's the address:

    http://support.ati.com/ics/support/default.asp?dep...">http://support.ati.com/ics/support/defa...mp;task=...
  • Lerianis - Monday, July 14, 2008 - link

    They probably haven't released a new driver for these cards yet and expect you to use the driver they include on the disk with the card. Wait until next month, they will most likely finally have a driver on their website for these cards.
  • alzg22 - Monday, July 14, 2008 - link

    They do have drivers, Catalyst 8.6 introduced support for the 4800 series. It's just not listed under the driver finder, probably.
  • bob4432 - Monday, July 14, 2008 - link

    i think they are referring to a driver that changes the fan speed so you don't cook the 4850/4870s....
  • KikassAssassin - Monday, July 14, 2008 - link

    You can do that now by creating an Overdrive profile in the control center, and editing the profile's file (Documents/username/AppData/Local/ATI/ACE/profilename.xml) in Notepad. There's a line in there for fan speed that you can edit. I set mine to 40% (up from the default 20%) and idle temps on my 4870 dropped from about 75C to 45C, and load temps dropped from about 95C to about 65C. 40% fan speed was right about at the upper limit I could set it to before the fan noise became annoying (the thing seriously sounds like a freaking jet engine at max speed).

    It'd be nice if they'd add an option to change the fan speed in the control center, though.
  • sc3252 - Monday, July 14, 2008 - link

    This card is hot for a $500 video card. I cant wait to pick one up. Two questions I have. Does it actually share the memory or is it separate? Did they fix the stutter associated with Crossfire?
  • DerekWilson - Monday, July 14, 2008 - link

    oh yeah, and we're going to wait until the card actually comes out to look at things like micro-stutter etc...
  • DerekWilson - Monday, July 14, 2008 - link

    memory is not shared. shared framebuffer won't come out for a while yet apparently ...

    each GPU has a separate 512MB framebuffer.
  • LeftSide - Monday, July 14, 2008 - link

    Hardopc is saying their card has 2gigs, 1gig per core. Are there 2 versions of this card?

Log in

Don't have an account? Sign up now