Adding in the Subwoofer
The next step is to add in the subwoofer. As I'm feeding the I2S output from the PCM2707 to the TDA1543 and both Opus PCBs simultaneously, it's possible to use the TDA1543 output solely to drive the subwoofer. The Opus DACs will be used with the 300Bs and Transparence speakers maintaining a crossover-less setup for the midrange and highs.
The Linnn Isobarik 5150 is configurable to crossover between 41-81Hz in variable steps. I started off at 41Hz initially, but found that the sub gave away its corner of the room location frequently when rendering sub bass. I'm out of space in my main living room and with the Linn being quite the behemoth, there really is nowhere else for me to put it. Crossing over at 48Hz seemed better to my ears, so we'll proceed to look at the room response with the sub in place.
Opus plus Sub |
That's better; we now have a decent response to around 25Hz. The nature of the Linn sub in my room is quite "boomy" and the bass lacks definition, even with a minimal amount of gain (possibly due to placement). Crossing the unit in a little higher does help with this, but then things get lumpy around 60Hz where there's already a peak from the main speakers. It'll be interesting to see how applying DRC will level things out.
Opus plus Sub with DRC The wonders of DRC - a predicted near flat in room response between 25 Hz and 15 KHz. |
Now we're talking! A predicted response most of us dream of at the listening position. The correction file was hastily loaded into Convolver and a few tracks played to see how things sounded. At the risk of sounding like a salesman, I can tell you I was pretty knocked out by the results. The integration of the subwoofer is almost seamless, only hinting at its location on the very lowest notes. All the perceived boom factor from the bass is gone. What remains is the tightest, most articulate bass I've heard outside using my Sennheiser headphones. I already knew the Supravox drivers in open baffles had real promise, but armed with DRC and a subwoofer, they simply move up to another league.
Switching DRC on and off is pretty much a day and night change. Listening without the filters is almost torturous when you've been subjected to what is possible. It's not that things get fatiguing; it's just that everything sounds chaotic and bloated without DRC to correct the abnormalities. The sonic quality of both DAC kits combined with a PC as the feed has surpassed my expectations, far in excess of what I can recall from the HDA Xplosion card I dismissed as lackluster in my previous attempts of using a PC based front end.
114 Comments
View All Comments
Clauzii - Monday, December 1, 2008 - link
.. I can recommend a Terratec Phase 22. No computernoise whatsoever. Pure, clean sound. I don't have a surroundsetup, but movies through this card sound brilliant, with a lot of detail and no digital 'fnitter-fnatter'.Clauzii - Monday, December 1, 2008 - link
Have to correct myself: With the card You can actually hear all the bad mixing of the movies themselves.daar - Monday, December 1, 2008 - link
Honestly, for a tech review site, I'm very disappointed that you nixed any pro sound cards and went for the audiophile kool-aid. Proper regulation and filtering can deliver clean enough juice for the best audio applications and while the USB option is kind of interesting, it creates more clutter, is more expensive, and the supposed better quality can't even be objectively tested.There wasn't even an attempt to build a measurement procedure, and while some sustain the notion that audio is beyond measurement, since when does AT throw out standard science and efficient engineering in favor of pseudoscience?
RobinBee - Monday, December 1, 2008 - link
"Proper regulation and filtering"Yes. A good motherboard does this. And: A hi-fi sound card such as ASUS Xonar D2 (PCI bus) delivers »clean juice«, very much better than Creative's x-fi. And: A good case makes a pc rather quiet.
RagingDragon - Saturday, December 6, 2008 - link
And a sufficiently powerful amp and/or headphones with good isolation make PC noise irrelevant.Servant of Shodan - Monday, December 1, 2008 - link
Not meaning any disrespect to the author - it was a good article - but I've notice a lot of camera reviews recently, and now a review about audiophile stuff... and it just seems so out of place for a PC enthusiast site.There are hundreds of credible sites for both cameras and stereos/speakers/amps/etc.; and I feel that it sort of muddies the waters here to have these types of articles, when there are other excellent places where they fit in perfectly.
I come to Anandtech for computers. I think it should keep to that topic.
SpeedyVV - Monday, December 1, 2008 - link
Holy cow, audiophiles i think are THX certifiable!!!Can you guys actually hear yourselves???
All joking aside, I love music, and sound, and guitar tube amps, a nice hi-fi.
But the stuff you guys talk about is way, WAY, beyond me ;-)
Boushh - Monday, December 1, 2008 - link
DRC does realy work. Last year I exchanged my old SONY AV receiver for a new Denon AVR-3808 with Audyssey. With the SONY I was unable to get a good sound at my listning postion (specialy the rears never actually worked). And even though I had my reservations for things like Audyssey, I ran it on the Denon. And low and behold: Now I was in the middle of everything. I was realy amazed that taking some samples with a microphone could have such impressive results.The second thing: DAC's for computers. I recently saw that Cambridge Audio released a DAC for (among other things) computers (http://www.cambridgeaudio.com/summary.php?PID=320&...">http://www.cambridgeaudio.com/summary.php?PID=320&.... Maybe a good idea to compare that to the setup used in the article. It seems to me that instead of all those components it would (for the most of us) be alot easier if it was just in one box. But maybe that is just me :-)
Anyway, nice article. It shows that people who are intrested in audio and are willing to do something for it are always on a never ending road B-)
strikeback03 - Monday, December 1, 2008 - link
... that this article shows that looks are not everything, as those drivers look like the cheap junk that comes in stock car systems.jabber - Monday, December 1, 2008 - link
They probably are! Remember in the world of 'high-end hi-fi' you build a component out of $20 worth of bits, stick a bit of varnish sanded wood on it then add on the 2000% 'hi-fi mug tax'.Its one of the best businesses to be in if you are unprincipled and lazy.
Your customers are easy because they have invested so much money in their systems they are always open to fear and doubt about it. Easy prey!