Foxconn Blood Rage - If Looks Could Kill (UPDATE)

Board & Features Overview

We support this kind of design decision on a dedicated high-end overclocking board. There's no point in going to the lengths of employing superior circuits if the implementation is shoddy. We've also noticed that some of the six memory slot boards from ASUS are too wide to be used in some of the smaller gaming cases as they leave scant if any room between drives bays and the SATA ports. The Blood Rage's conventional width means it should have no problem fitting in such PC cases. However, the maximum memory limitation means this board is not as attractive to those looking for an all-around workhorse.

The bundled accessory range is impressive, containing four different cooling options (passive, air (fan), water, and a pot for LN2/DI) for the uni-connected heatsink. For the gamers out there, the bundled Sonar soundcard employs a Creative X-Fi chipset with EAX 4.0 capabilities via software, a welcome move compared to the standard Realtek offerings. A standard slew of IDE/SATA/SAS cables are all on tap, together with USB and 1394 I/O modules. The AEGIS panel software and a collection of motherboard related tools are also included in the package.

The $300 price tag was a bit of a surprise move from our perspective -- we were expecting a bundle like this to come in toward the $375-$400 mark. $300 and up is a lot of money for a motherboard, but is actually competitive (go on shoot us for saying that!) within this target segment. We've been keeping a close eye on Newegg over the past few days and have noticed that the boards are selling out as soon as they arrive, although we did manage to grab one.

Our testing was all performed on the G13 shipping BIOS -- the same BIOS you'll be firing your board up on if you buy one right now. For once, we're in the lucky position of having no fewer than three of these motherboards in our test labs. Two full-retail package boards were sent to us by Foxconn and we went on to buy a third one to confirm our results against our sample retail boards. It'll please you to know all three boards exhibit the same traits when used with the exact same components. What is not pleasing is the current state of the shipping BIOS that we will discuss shortly.

All testing was performed under the Vista 64-bit OS with SP1 utilizing a fresh install. Windows XP Professional 32-bit SP3 was thrown into the mix just to confirm the working/non-working state of the bundled AEGIS panel motherboard software utility. Foxconn has revamped the AEGIS panel GUI for the Blood Rage. Use of this software has been hit and miss for us. Although it installs fine on Vista and XP, we found that the overclocking utility does not work correctly for making changes, resulting in an information only application at this point. Any changes to voltages, bus speeds, or even pressing the apply button without making a change results in an operating system freeze.

We also attempted bus speed changes with SetFSB using the correct PLL part entry. Again, regardless of a change or non-change setting, pressing the apply button results in an OS hang-up. We've reported this back to Foxconn and await confirmation that they can re-create this problem and perhaps instigate a speedy fix. Onwards to initial results….