FarCry 2 Multithreaded Game Performance

FarCry 2 ships with the most impressive benchmark tool we’ve ever seen in a PC game. Part of this is due to the fact that Ubisoft actually tapped a number of hardware sites (AnandTech included) from around the world to aid in the planning for the benchmark.

For our purposes we ran the CPU benchmark included in the latest patch:

Far Cry 2 - 1680 x 1050 - Playback (Action Scene) - Medium Quality

Both Far Cry 2 and Crysis Warhead favor Intel's CPUs and thus we don't see much competition from AMD here.

Crysis Warhead

Crysis Warhead - 1680 x 1050 - Mainstream Quality (Physics on Enthusiast) - assault bench

Fallout 3 and Left 4 Dead Gaming Performance Power Consumption
Comments Locked

77 Comments

View All Comments

  • Griswold - Monday, February 9, 2009 - link

    "We're in the midst of a price war folks, and at a time when the global economy is looking a little shaky this actually works very well for us. Let's recap what's happened."

    That works very well for us until AMD, despite having a good product portfolio (this includes video cards), goes belly up thanks to this worldwide recession (a little shaky? Where have you been the last couple of months!?).And then what? Back to moon prices courtesy of Intel?

    I hope not, but fear the worst. :(
  • lplatypus - Monday, February 9, 2009 - link

    Why does the Ph II 940 system use only 4W more than the 810 at load? This is not consistent with TDPs (125W vs 95W). The HEXUS.net review found a 23W difference under load. Is something wrong here?
  • Axloth - Monday, February 9, 2009 - link

    I'd love to see detailed test of impact of cache size per core, because test results in this review are really weird. Something like x4 910 vs x4 810 vs x3 710. Pretty please with sugar on top...
  • ET - Monday, February 9, 2009 - link

    Needs more comprehensive testing, period. The results look really strange sometimes. Not only did the 810 sometimes outperformed the 910 significantly, but the 710 consistently beat the 910 in the gaming tests.

    (So far -- and I haven't read other reviews -- the 710 is looking like a good candidate to replace my aging X2 3800+.)
  • RadnorHarkonnen - Monday, February 9, 2009 - link

    From the rumors ive seen in the web, this will be a pretty cheap cpu.

    Myt little brother is crying for My 4800 X2 (he always get free upgrades) with 4Gb DDR2.

    Just one question, With a Stock VID 1.325 to 1.55 isn't that a little bit aggressive (even with good air cooling), for everyday operation ? I was hoping for a OC up to 3.6Ghz in decent voltage. 3.8Ghz Would be very good, but the voltage seems somewhat too large for day-to-day operation.

    Thanks for reading, and replying if you have the time, of course.
  • Gary Key - Monday, February 9, 2009 - link

    On our samples, starting around 3.5GHz you really had to ramp the Core VID. 3.6 required about 1.45V in the BIOS, with droop it was around 1.4375V real on this board. If the retail chips follow the 940, then I would say around 1.425V should be realistic for 3.6GHz on the right board. 1.55V is not outside of AMD's spec and is the limit they have found for air cooling. It is about the same limit we have noticed also for the most part, but these chips are designed to take a lot voltage if you keep them properly cooled.
  • RadnorHarkonnen - Monday, February 16, 2009 - link

    I'm already checking prices and availability for this hardware. I'll check the speed bump and the temp bump between 3.5 and 3.6. Thanks for the info Gary.
  • duploxxx - Monday, February 9, 2009 - link

    most run 3.4 ghz already on stock vcore

    @review, you state that there is no performance difference between ddr2-ddr3 but you didn't show anything? Anyhow official statement from AMD is that the ddr3 part bios is not fully ready yet, so I hope you will do a full review later.
  • Gary Key - Monday, February 9, 2009 - link

    "@review, you state that there is no performance difference between ddr2-ddr3 but you didn't show anything? Anyhow official statement from AMD is that the ddr3 part bios is not fully ready yet, so I hope you will do a full review later."

    AMD told us a couple of weeks ago to concentrate on performance with the AM2+ boards since the AM3 BIOS releases were immature. I received several BIOS releases last week for our AM3 boards and felt safe enough to display numbers with them in the OC section today.

    We are still testing and will have comparisons up in the near future. That said, we still have a list of requests back to the motherboard companies to fix. For the most part now, the AM3 boards are usable and clock well. I figure another BIOS spin or two and they should be good to go.

    Also, in a best case scenario, AMD had performance improvements of 5% at best in memory bandwidth limited benchmarks with DDR3. Things might change with the 945 hits in a couple of months, but on these processors, there really are not any differences between DDR2 and DDR3 at this point.
  • Kaleid - Monday, February 9, 2009 - link

    Power consumption and framerates at the max stable overclock?

Log in

Don't have an account? Sign up now