Antec Nine Hundred Two: Second Generation Gamer Case
by Christoph Katzer on February 13, 2009 3:00 AM EST- Posted in
- Cases/Cooling/PSUs
Inside
Two thumbscrews secure the side panels, providing easy access to the internals. As stated earlier, the interior is painted black, making this the perfect case for any Goths. This isn't really a huge deal, however, and you really can't see much of the interior once all of your components are installed and the side panels are back in place. Still, it does add a little something extra when you're looking through the window into the lit up interior.
Similar to many recent high-end cases, the power supply is located at the bottom of the chassis. There are four small rubber grommets at the bottom where the power supply will be installed, which can help reduce case vibrations and noise. There are also two rubber covers on the back that are useful for anyone looking at using external water cooling. You can pass tubes through these holes to an external radiator and/or reservoir.
The case includes two hard drive cages, each supporting three drives, initially installed in the middle and bottom locations. The bottom cage includes a 120mm fan, and you can install an optional 120mm fan on the other drive cages -- although it's probably not necessary from a cooling standpoint. Note that if you want to use more than three optical drives (Ed: Umm… why?), you'll need to remove one of the drive cages. That shouldn't be a problem for most users, unless you want to start up some sort of CD/DVD/BRD duplication factory.
Overall, the Nine Hundred Two is pretty close to actual ATX case specifications. Other than the power supply not being at the top, the cooling arrangement is pretty much standard fare. Air enters through the front of the chassis (passing through air filters) and cools the graphics cards, hard drives, etc. The top 200mm fan and rear 120mm fan serve as the exhaust, providing what should be more than adequate cooling. If you need or want more case fans, you can add a 120mm fan behind the second hard drive cage, along with another 120mm fan above the expansion slots.
Facebook
Twitter
RSS
56 Comments
View All Comments
IvanAndreevich - Friday, February 13, 2009 - link
Intel Core 2 Extreme QX6850(Quad-core 3.0GHz, 2x6MB L2, 1333FSB)
It's 2x4MB L2 ;)
v1001 - Friday, February 13, 2009 - link
My brother has this case. It's hideous. I about laughed when I saw it. I just bought this super small shuttle case that is very cool and quiet and fits anywhere. He gets this monster and it's HUGE. I mean really HUGE and loud. Totally out of place in his living room. At first I seriously thought he had like this big ugly guitar amp sitting next to his desk. I was like "what the hell did you get this for?? This isn't 2001 anymore! We don't have super hot CPU's, they run super cool and can fit in any tight case with minimal fans now!". I made him turn all the fans down though so at least it was quiet. Which the temp never budged because it was overkill anyway. With all the fans down and really not needed it tells you that it's all pointless anyway.bruf - Friday, February 13, 2009 - link
Any case recommendations for long gfx card (GTX or Radeon X2) from Antec or other manufacturers which sport the same minimalist/conservative design? I really like my Antec Solo case, but it doesn't fit the new high-end gfx cards from nVidia & ATI...Thx,
Christoph Katzer - Friday, February 13, 2009 - link
If you don't have too many drives take this one ;)just4U - Friday, February 13, 2009 - link
I'd love to see a revamped Lanboy.. It wouldn't have to be called that just based around some of it's design. All aluminum, (black would be nice) Top mounted PSU, Side drive cages (i was a fan of those) Front and back 120mm fans (hell make them bigger if they want It would be a fatter case tho) Just make sure they have a mesh for cleaning. Perhaps a removable MB tray (wishful thinking) Normal full view window. All in all I think that thing would sell like hotcakes.greywood - Friday, February 13, 2009 - link
I did a build based on the original Antec 900 case; worst choice of case I've made in years! I wanted to build a good gaming rig that would also be quiet - not! Config is: Intel E8500, 4Gb Ram, 2 DVD's 2 HDD's, single ATI 4780 512 Mb video. I had to relegate the thing to use as a "guest" machine. Sounds like a bloody 727 on takeoff.7Enigma - Tuesday, February 17, 2009 - link
Then just do what I do. I have an older TitanS case which uses 2 120mm fans but is still not that quiet. I keep it under my desk and have the floor underneath with carpet, some foam on the underside of the desk that you can't see unless you are under there, and foam behind the LCD monitor and attached to the wall behind the case. Nothing obstructs airflow or traps heat, it just significantly helps at absorbing sound that would otherwise reflect up to the user and be unbearable.The0ne - Friday, February 13, 2009 - link
I've built a few computers using the old 900 and they're not loud; the fans that is. You should determine what this "loud" is coming from other than just putting everything in and saying the case is loud. It's one of the quieter cases out there but still doesn't compare to 180's.pepsimax2k - Friday, February 13, 2009 - link
fwiw, mine's not bad at all (quieter than vaio laptop when idle).5200+ (89w), 4gb, 2dvds, 2hdds, 3850.
Every fan's on low (two front, top, rear, 2x psu 80mms), hsf's at 1000rpm, and it's perfectly fine. Only the HSF gets pretty loud when it ramps up, but idle temps are 24C so it's all good. I figure if I remove a front fan and either the top or rear it's gonne be quiet enough for most people.
pepsimax2k - Friday, February 13, 2009 - link
About the GC space and cages sticking out the front; this is actually doable without too much hastle.Just shunt *all* the front devices forward a little; it shouldn't look abnormal at all as the sides, front and bottom overlap quite a lot (at least on the original 900). If that doesn't give you room, you can just remove the three front bezels from the front fan adaptor and move it even further forward. You loose the uniform look, but if you screw on a fan filter (black, or in my case chrome) to the front of the fan holder it covers the fan up and gives an almost normal looking front. You'll also wanna fill in the gaps in the side of the fan holder (left after removing the bezels), just some black electrical tape over some card cut to the right side works for me. This has given me enough space to fit an ide cable in behind a GC / power connector (angled towards the front of the case).