The SSD Anthology: Understanding SSDs and New Drives from OCZ
by Anand Lal Shimpi on March 18, 2009 12:00 AM EST- Posted in
- Storage
The Trim Command: Coming Soon to a Drive Near You
We run into these problems primarily because the drive doesn’t know when a file is deleted, only when one is overwritten. Thus we lose performance when we go to write a new file at the expense of maintaining lightning quick deletion speeds. The latter doesn’t really matter though, now does it?
There’s a command you may have heard of called TRIM. The command would require proper OS and drive support, but with it you could effectively let the OS tell the SSD to wipe invalid pages before they are overwritten.
The process works like this:
First, a TRIM-supporting OS (e.g. Windows 7 will support TRIM at some point) queries the hard drive for its rotational speed. If the drive responds by saying 0, the OS knows it’s a SSD and turns off features like defrag. It also enables the use of the TRIM command.
When you delete a file, the OS sends a trim command for the LBAs covered by the file to the SSD controller. The controller will then copy the block to cache, wipe the deleted pages, and write the new block with freshly cleaned pages to the drive.
Now when you go to write a file to that block you’ve got empty pages to write to and your write performance will be closer to what it should be.
In our example from earlier, here’s what would happen if our OS and drive supported TRIM:
Our user saves his 4KB text file, which gets put in a new page on a fresh drive. No differences here.
Next was a 8KB JPEG. Two pages allocated; again, no differences.
The third step was deleting the original 4KB text file. Since our drive now supports TRIM, when this deletion request comes down the drive will actually read the entire block, remove the first LBA and write the new block back to the flash:
The TRIM command forces the block to be cleaned before our final write. There's additional overhead but it happens after a delete and not during a critical write.
Our drive is now at 40% capacity, just like the OS thinks it is. When our user goes to save his 12KB JPEG, the write goes at full speed. Problem solved. Well, sorta.
While the TRIM command will alleviate the problem, it won’t eliminate it. The TRIM command can’t be invoked when you’re simply overwriting a file, for example when you save changes to a document. In those situations you’ll still have to pay the performance penalty.
Every controller manufacturer I’ve talked to intends on supporting TRIM whenever there’s an OS that takes advantage of it. The big unknown is whether or not current drives will be firmware-upgradeable to supporting TRIM as no manufacturer has a clear firmware upgrade strategy at this point.
I expect that whenever Windows 7 supports TRIM we’ll see a new generation of drives with support for the command. Whether or not existing drives will be upgraded remains to be seen, but I’d highly encourage it.
To the manufacturers making these drives: your customers buying them today at exorbitant prices deserve your utmost support. If it’s possible to enable TRIM on existing hardware, you owe it to them to offer the upgrade. Their gratitude would most likely be expressed by continuing to purchase SSDs and encouraging others to do so as well. Upset them, and you’ll simply be delaying the migration to solid state storage.
Facebook
Twitter
RSS
250 Comments
View All Comments
SunSetSupaNova - Wednesday, March 18, 2009 - link
Just wanted to say great job Anand on a great article, it took me a while to read it from start to finish but it was well worth it!FHDelux - Wednesday, March 18, 2009 - link
That was the best review i have read in a long time. I originally bought an OCZ Core drive when they first came out. It was the worst piece of garbage i had ever used. Newegg wouldn't let me send it back and OCZ support forums told me all sorts of junk to get me to fix it but it was just a poorly designed drive. I eventually ended up getting the egg to take it back for credit and i wrote OCZ off as a company blinded by the marketing department. I currently own an Intel SSD and its wonderfull, everytime i see OCZ statements saying their drive competes with the Intel drive i would laugh and think back to the OCZ techs telling me i need to update my bios, or i need to install vista service pack 1 before it would work right.I am thankful that you slapped that OCZ big wig around until they made a good product. All of us out there that wasted our time and money on Pre-vertex generation drives are greatfull to you and the whole industry should be kissing your butt right now.
One thing these companies need to learn is that marketing isn't the answer, creating solid products is. Hopefully OCZ has learned their lesson, and because of your article i will give them another chance.
THANK YOU!
kelstertx - Wednesday, March 18, 2009 - link
I didn't want to worry about eventual failure of the Flash chips of an SSD, and went with an SDRAM based Ramdrive from Acard. These drives have no latency of any kind, since they use SDRAM, and no lifespan of write cycles. I've been using mine for a couple of weeks now, and I like it a lot. I put Ubuntu on mine, and had 2G left for my small home folder. The standard HDD is my long-term storage for data files, music, etc. As SDRAM gets more affordable over time, I can add DIMMs and bump up the size.I know this review was about SSDs strictly, so an SDRAM drive doesn't technically fit, but it would have been interesting to see a 9010 or 9010b in there for comparison. It beat the Intel SSD in almost all the tests. http://techreport.com/articles.x/16255/1">http://techreport.com/articles.x/16255/1
7Enigma - Wednesday, March 18, 2009 - link
I've been eying these guys ever since the announced their first press release. Every time I always was drawn away by the constant need for power (4h max on battery scares the bejeezus out of me if I was to be gone on vacation during a storm), high power usage at all times, and high cost of entry (after factoring in all of the ram modules).I really dislike that article as well, since I think the bottlenecks were much less apparent with such a horribly slow cpu. The majority of that review's data is extremely compressed. I mean a P4, and 1 gig of memory; are you F'ing kidding me? This article was written in Jan of this year!? Why didn't they just use my old 486DX?
tirez321 - Wednesday, March 18, 2009 - link
What would a drive zeroing tool do to write performance, like if you used acronis privacy expert to zero only the "free space" regularly? Would it help write performance due to the drive not having to erase pages before writing?tirez321 - Wednesday, March 18, 2009 - link
I can kinda see that it wouldn't now.Because there would still be states there regardless.
But if you could inform the drive that it is deleted somehow, hmm.
strikeback03 - Wednesday, March 18, 2009 - link
The subjective experiences with stuttering are more important to me than most of the test numbers. Other tests I have found of the G.Skill Titan and similar have looked pretty good, but left out mention of stuttering in use.Too bad, as the 80GB Intel is too small and the ~$300 for a 120GB is about the most I am willing to pay. Maybe sometime this year the OCZ Vertex or similar will get there.
strikeback03 - Tuesday, March 24, 2009 - link
When I wrote that, the Newegg price for the 120GB Vertex was near $400. Now they have it for $339 with a $30 MIR. Now that's progress.kamikaz1k - Wednesday, March 18, 2009 - link
the latency times are switched...incase u wanted to kno.also, first post ^^ hallo!
GourdFreeMan - Wednesday, March 18, 2009 - link
It seems rather premature to assume the ATA TRIM command will significantly improve the SSD experience on the desktop. If you were to use TRIM to rewrite a nonempty physical block, you do not avoid the 2ms erase penalty when more data is written to that block later on and instead simply add the wear of another erase cycle. TRIM, then, is only useful for performance purposes when an entire 512 KiB physical block is free.A well designed operating system would have to keep track of both the physical and logical maps of used space on an SSD, and only issue TRIM when deletion of a logical cluster coincides with the freeing of an entire physical block. Issuing TRIMs at any other time would only hurt performance. This means the OS will have significantly fewer opportunities to issue TRIMs than you assume. Moreover, after significant usage the physical blocks will become fragmented and fewer and fewer TRIMs will be able to be issued.
TRIM works great as long as you only deal with large files, or batches of small files contiguously created and deleted with significant temporal locality. It would greatly aid SSDs in the "used" state Anand artificially creates in this article, but on a real system where months of web browsing, Windows updates and software installing/uninstalling have occurred the effect would be less striking.
TRIM could be mated with periodic internal (not filesystem) defragmentation to mitigate these issues, but that would significantly reduce the lifespan of the SSD...
It seems the real solution to the SSD performance problem would be to decrease the size of the physical block... ideally to 4 KiB, as that is the most common cluster size on modern filesystems. (This assumes, of course, that the erase, read and write latencies could be scaled down linearly.)