Faster Graphics For Lower Prices: ATI Radeon HD 4770
by Derek Wilson on April 28, 2009 5:15 AM EST- Posted in
- GPUs
Meet The Radeon 4770
With 826 Million transistors, the RV740 GPU that powers the Radeon HD 4770 features a native 640 SP (128 five-wide vector units arranged in 8 SIMD cores) as opposed to the 640 cut-down-from-800 SP 4830. Among the other differences is the fact that the 4770 hooks into GDDR5 over a 128-bit memory bus at almost the same clock speed (producing just a little bit less bandwidth at half the pinout).
AMD reports average TDP to be about 80W, so despite the fact that this is a 40nm part that pulls a little less power for the same job than its older brothers, the Radeon HD 4770 still requires a 6-pin PCIe power connector. This isn't a huge amount of power, and AMD has single slot boards that fall in to this range. Of course, it likely gets a little more complicated at 40nm when you have less surface area to dedicate to heat transfer. Thus this is a dual slot part rather than a single slot part. Such is life.
So, rather than a totally killer single slot card with no power connector at $99, we've got a dual slot card with a power connector at $110. Not ideal, but we can work with that. Rather than the 40nm process, form factor or targeted design being the selling point, the real issue is going to be the competition.
We will be comparing the Radeon HD 4770 to the GeForce GTS 250 512MB (aka the 9800 GTX+) and the GeForce 9800 GT. These two cards sort of sandwich the Radeon HD 4770 in terms of price with the 9800 GT coming in at $100 and the GTS 250 512MB at slightly more than $120. So the question will continually be: does the extra +/- $10 make a difference.
This part essentially improves upon and usurps the position of the Radeon HD 4830. Word from AMD was that we should see the 4830 start to fall by the wayside. For our analysis we are including the Radeon HD 4830 and the Radeon HD 4850. Here's a breakdown of how the AMD hardware stacks up:
ATI Radeon HD 4770 | ATI Radeon HD 4850 | ATI Radeon HD 4830 | |
Stream Processors | 640 | 800 | 640 |
Texture Units | 32 | 40 | 32 |
ROPs | 16 | 16 | 16 |
Core Clock | 750MHz | 625MHz | 575MHz+ |
Memory Clock | 800MHz (3200MHz data rate) GDDR5 | 993MHz (1986MHz data rate) GDDR3 | 900MHz (1800MHz data rate) GDDR3 |
Memory Bus Width | 128-bit | 256-bit | 256-bit |
Frame Buffer | 512MB | 512MB | 512MB |
Transistor Count | 826M | 956M | 956M |
Manufacturing Process | TSMC 40nm | TSMC 55nm | TSMC 55nm |
Price Point | $110 | $130 | $100 |
It's worth noting that the bandwidths of the 4770 and the 4830 are 51.2GB/s and 57.6GB/s respectively.
We have also tweaked a couple of our tests to better target the ~$100 segment. The biggest change was with our Crysis test where we dropped everything down by one quality level ending up with all mainstream settings except for gamer shaders. The other was just a small tweak: not pushing things beyond the high quality default settings in Age of Conan (though we did enable 4xAA).
In the middle of testing, we accidentally let our copy of Left 4 Dead update itself rendering our benchmark un-timedemo-able. Thus we have to leave Left 4 Dead performance out of this article, but we can say that at the highest quality settings the 4770 is capable of playable framerates at up to 1680x1050.
Our test setup is still the Intel platform with a top of the line CPU in order to remove any other bottlenecks from the system. These performance numbers show the potential the graphics card has to offer. If the rest of a system is unable to achieve performance levels along the lines of what we show here, then it doesn't matter what graphics card we plug in at this price: it will end up performing pretty much the same as any other option (at the system bottleneck level). These tests show the potential of a graphics card when the potential of the graphics card makes a difference. That said, most Phenom II, Core 2, and Core i7 systems will be very close to these numbers at the common resolution of 1680x1050 with the tested hardware; the fast system/CPU generally only becomes a factor at lower resolutions or with multiple GPUs.
Test Setup | |
CPU | Intel Core i7-965 3.2GHz |
Motherboard | ASUS Rampage II Extreme X58 |
Video Cards | ATI Radeon HD 4770 ATI Radeon HD 4830 ATI Radeon HD 4850 NVIDIA GeForce GTS 250 NVIDIA GeForce 9800 GT |
Video Drivers | 9.4, 9.4 Beta for 4770 ForceWare 185.68 |
Hard Drive | Intel X25-M 80GB SSD |
RAM | 6 x 1GB DDR3-1066 7-7-7-20 |
Operating System | Windows Vista Ultimate 64-bit SP1 |
PSU | PC Power & Cooling Turbo Cool 1200W |
Without further ado, here's the performance numbers.
88 Comments
View All Comments
Proteusza - Tuesday, April 28, 2009 - link
Looks like a good card. Hopefully the lessons learnt from this 40nm process will enable future AMD graphics cards (or even the 4870) to use it.One thing though - in light of the fact that the 4830 will be dropped, the naming scheme makes sense.
Relative performance is now:
4830 -> 4770 -> 4850 -> 4870
It will become
4770 -> 4850 -> 4870
And everyone is happy again. At least its not misleading - I mean the 4770 really is a different card altogether to the 4800 series, so its good that its name reflects that. Pity it requires an external power connector, but at least it isnt very power hungry.
AmazighQ - Tuesday, April 28, 2009 - link
and the fact that the 4830 was only a temporarily solution to fill up the 100 dollar gap, is and was very well knownhere a beter review of the HD 4770 :http://www.xbitlabs.com/articles/video/display/rad...">http://www.xbitlabs.com/articles/video/display/rad...
Amiga500 - Tuesday, April 28, 2009 - link
If AMD had named it the 4750 we'd all be happy.4750 -> 4850 -> 4870
Griswold - Wednesday, April 29, 2009 - link
Why? There will be a 4750 with GDDR3 and lower core clock speed...wit p - Tuesday, April 28, 2009 - link
it seems that power management in these 40nm parts is completely redesigned. Could we (readers, of course) know more on this? TDP of about 80W versus delta (full load - idle) of just above 40W? I wonder if this PCIe power connector and two-slot cooling aren't just a precautionary features... Maybe at AMD/ATI they couldn't approximate properly new parts' power consumption?IMO: the perfect first hit, I even don't regret these famous 10$ ;) 48xx must be sold ;)
Zoomer - Tuesday, April 28, 2009 - link
There were many issues regarding TSMC's 40nm node. Apparently, there were many issues with leakage. ATi probably wanted to err on the side of caution after the adequate but much maligned 4850 cooler.FireSnake - Tuesday, April 28, 2009 - link
.... it is excellent part.And, I don't know, how you talk about 110$, when this part is available in Europe (which tends to be more expensive, I don't know why) for 89€ (Listed for 87)!
http://geizhals.at/eu/a426956.html">http://geizhals.at/eu/a426956.html
And bitching about name ..... you would rather test overclocking capabilities.
evilspoons - Tuesday, April 28, 2009 - link
Maybe because 89€ is $115 USD when you apply the exhange rate. Just a thought.Griswold - Wednesday, April 29, 2009 - link
Just that you didnt include (or rather subtract) the 19% VAT they pay in germany in your equation, which is included in the 89€.balancedthinking - Tuesday, April 28, 2009 - link
I agree, this seems very try hard by Derek to criticize at least something.It is even more funny to lash out at AMD for using a lower number for a better performing card. Compare that to the competition which renames with higher and higher numbers and the performance does not change. Talk about "understatement" versus "deceiving".