AMD’s Radeon HD 5770 & 5750: DirectX 11 for the Mainstream Crowd
by Ryan Smith on October 13, 2009 12:00 AM EST- Posted in
- GPUs
Batman: Arkham Asylum
Batman: Arkham Asylum is another brand-new PC game, and has been burning up the review charts. It’s an Unreal Engine 3 based game, something that’s not immediately obvious from just looking at it, which is rare for UE3 based games.
As Batman: Arkham Asylum implements anti-aliasing differently between AMD and NVIDIA cards, this is the one title that we do not test AA on, as doing so produces results that can’t be compared.
The 5770 goes back to losing by a wider margin compared to the 4870, roughly 10% this time. The story of it compared to the GTX 260 is also the same, with another GTX 260 win.
Meanwhile the 5750 gets another win over the 4850, although this is one of the only times it loses to the GTS 250.
Finally, a 5850 will buy you another 45%-55% in performance, for $100.
Facebook
Twitter
RSS
117 Comments
View All Comments
endlesszeal - Tuesday, October 13, 2009 - link
sorry, if this seems newbest since im still using DVI. anyway, i did a quick peak at apples site and only saw minidp to dvi dongle. however, i jumped over to monoprice and found this:http://www.monoprice.com/products/product.asp?c_id...">http://www.monoprice.com/products/produ...1&p_...
would that work?
Xajel - Tuesday, October 13, 2009 - link
Nope this wont work, the card(s) has only two TMDS's for one DVI and one DVI or HDMI, you can't use two DVI's + HDMI...if you want to connect the third monitor you have to use Display Port, and adapters won't work since DP on this card doesn't support DVI single Pass through ( this will need a seperated TMDS chip )
there's some devices that support DVI/HDMI pass throught using DisplayPort, I'm talking about Apple latest Mac's where they dropped DVI/HDMI and replaced it with DP... that one supports DVI/HDMI adapters as it has it's own TMDS chip which is required for DVI/HDMI signals...
elfick - Tuesday, October 13, 2009 - link
Monitors with HDMI seem fairly common and DP-HDMI adapters appear to be cheap. Could you do DP-HDMI, HDMI, and DVI for a triple monitor setup?Ryan Smith - Tuesday, October 13, 2009 - link
DP-HDMI is still a passive converter, so it still won't work.Ryan Smith - Tuesday, October 13, 2009 - link
No, it has to be an active (powered) adapter. You can tell if one is active if it has a USB plug, since that's where they're drawing power from.Minion4Hire - Tuesday, October 13, 2009 - link
It has to be powered if you wish to run dual-link DVI. The single-link MonoPrice adapter will work fine for resolutions up to 1920x1200. But most people looking to run Eyefinity will probably be wanting to go whole-hog with 2560x1600 given the large price tag already associated with such a setup.kzig - Thursday, October 29, 2009 - link
If I want to run 3 1280 x 1024 monitors together as 3840 x 1024 in Eyefinity, will I need an active adapter, or can I use a cheaper passive one?BladeVenom - Tuesday, October 13, 2009 - link
The Apple one is poorly rated. Dell has one, but it to is $100. And just to rerepeat that, it has to be an active adapter. http://accessories.us.dell.com/sna/products/Cables...">http://accessories.us.dell.com/sna/prod...us&l...Ryan Smith - Tuesday, October 13, 2009 - link
I was going to respond to this, but Xajel took the words out of my mouth. Just read his post, it explains why an active adapter is required.bijeshn - Tuesday, October 13, 2009 - link
Phasing out the 4870 is a bad idea. With time I look forward to the 4870 dropping even lower in price...