The SSD Improv: Intel & Indilinx get TRIM, Kingston Brings Intel Down to $115
by Anand Lal Shimpi on November 17, 2009 7:00 PM EST- Posted in
- Storage
Random Read/Write Speed
This test writes 4KB in a completely random pattern over an 8GB space of the drive to simulate the sort of random writes that you'd see on an OS drive (even this is more stressful than a normal desktop user would see). I perform three concurrent IOs and run the test for 3 minutes. The results reported are in average MB/s over the entire time:
Random write speed looks to be a bit better with the new firmware. The 80GB G2 being a little faster than the 160GB version for some reason. With enough free space, the Kingston SSDNow V performs similarly to a non-TRIM enabled X25-M G2.
Facebook
Twitter
RSS
162 Comments
View All Comments
DanH - Monday, October 26, 2009 - link
Do what I did. Buy a Gen 2, clone your drive, and sell the Gen 1 on ebay while it's still worth as much as it is. You will easily get close to $200 for the 80 gig version. I lost $30 upgrading, which was very worth it for TRIM support and the newest hardware.masouth - Wednesday, November 18, 2009 - link
I must be misunderstanding you so please let me make sure I have this right...Someone bought your USED G1 for $30 less than you paid for your NEW G2!?!
A sucker born every minute.
mwaschkowski - Monday, October 26, 2009 - link
what cloning software did you use?I guess I couldn't switch to another SSD at the same time due to needing to clone the drive and using the same drivers between both SSDs?
DanH - Monday, October 26, 2009 - link
I used Carbon Copy Cloner on the mac, but Acronis TrueImage would work fine on PC.chizow - Monday, October 26, 2009 - link
Acronis True Image is probably the easiest for Windows, especially if you're cloning to identical sized drives. With the trial you can do this for free, I believe Seagate and WD have simplified free versions if you have one of their drives installed.Don't mess with any of the backup/restore options, go to the Utilities and choose Clone drive, then select destination and source drives. Takes about 10-20 minutes depending how much data you have and is effortless.
mwaschkowski - Tuesday, October 27, 2009 - link
OK, Thanks!!pcfxer - Tuesday, October 27, 2009 - link
sudo dd if=/dev/da0 of=/dev/da1Boot up into Knoppix and it is legitimately free.
Concillian - Wednesday, October 28, 2009 - link
No kidding. I clone my drive every once in a while on my fileserver with dd. Why it's made so difficult in every other OS is beyond me. I really shouldn't need to buy software in order to make a copy. It's a pretty basic function, really.Griswold - Thursday, November 19, 2009 - link
Just that the aforementioned software isnt primarily a cloning software but a backup and image software. Cloning a disk is just a minor function of it. And no, cloning a disk isnt a worthwhile backup strategy for most people.That said, I backup my system and data on a daily basis, but I only clone a drive once maybe twice a year. I wouldnt mind if it was built into windows, but its far from a necessity.
Taft12 - Monday, October 26, 2009 - link
This is nothing new, it has been well known for many years that there is a price to pay by being an early adopter.