The Radeon HD 5970: Completing AMD's Takeover of the High End GPU Market
by Ryan Smith on November 18, 2009 12:00 AM EST- Posted in
- GPUs
Crysis: Warhead
As Crysis is the only game that particularly struggled under even a single 5870, this is the only game we’ve gone ahead and captured data for at resolutions other than 2560.
The 5970 gains the distinction of being the only single-card setup we have tested that can break 30fps on Crysis at 2560 – it’s enough to at least push Crysis in to playable territory here, even though we’ll gladly take more performance if we can get it. So Crysis hasn’t quite fallen yet, but it’s very close. It’s also something where the 5970CF results would be quite interesting if we had them.
Interestingly, the 5970 manages to lose not only to the 5870CF, but the 5850CF by a very slight amount. The 5970 is clocked exactly the same as the 5850CF and has 2 more SIMDs, so we certainly aren’t expecting it to lose here. This may be driver related or it may be PCIe bandwidth related (each half of the 5970 only gets 8x bandwidth) but we aren’t sure which.
Meanwhile the GTX 295 sees the first of many falls here. It falls behind the 5970 by 30%-40%. The 5870 gave it a run for its money, so this is no surprise.
Finally, overclocking the 5970 to 5870 speeds nets you another 14%-18% in performance, which is quite interesting since the theoretical difference is only supposed to be 15%. But these numbers are repeatable; the 5970 likes being overclocked here.
Facebook
Twitter
RSS
114 Comments
View All Comments
kilkennycat - Thursday, November 19, 2009 - link
Er, have you noticed the "Not in Stock" or "Pre-order" when you have gone to order one. You might get a 5850, but try finding a 5870 without having to psy a jacked-up premium over MSRP. Best of luck.mrdaddyman - Wednesday, November 18, 2009 - link
Since the 5870 seems to be in such great supply, I would like for someone to post a link where I can actually buy one of these. I have been trying to buy one for a month and haven't been able to find one.rennya - Thursday, November 19, 2009 - link
Does it has to be online?Here, I have many options for 58xx and 57xx models in retail stores. Which is more applicable for me because Newegg doesn't ship to my place.
Well, if you insist of finding online links, plenty of them at http://flaturl.com/eb0">http://flaturl.com/eb0 or http://flaturl.com/YmU">http://flaturl.com/YmU or http://flaturl.com/pAU">http://flaturl.com/pAU or http://flaturl.com/q15">http://flaturl.com/q15 or http://flaturl.com/5av">http://flaturl.com/5av and many more.
These are just some of the sellers in my place who sells those so-called mythical ATI cards online (doesn't include the gazillions others sold in retail). You may want to argue that they won't ship to you in United States, but then again the likes of NewEgg doesn't ship here too.
If you are desperate enough, I can help you obtain one of those cards. Want to take the offer?
Alexstarfire - Wednesday, November 18, 2009 - link
And this is the 5970 that we are talking about. Not the same thing.MamiyaOtaru - Thursday, November 19, 2009 - link
by saying "another paper launch" you were implying that the previous launches were paper. So you were talking about the 5870. As they are and have been available, they were not paper launches. So even if the 5970 is a paper launch (it isn't) you can't very well call it another onetajmahal - Wednesday, November 18, 2009 - link
No link yet for the 5850 or the 5870? That's a surprise.lloyd dd - Wednesday, November 18, 2009 - link
would using 3 monitors in portrait orientation sort out the aspect ratio in eyefinity?JarredWalton - Wednesday, November 18, 2009 - link
It would be closer. 4800x2560 would end up at a 1.875 AR, compared to 1.78 for 16:9 and 1.6 for 16:10. I think that 16:9 content stretched to fill 4800x2560 should look fine (about the same as 16:10 stretched to fill a 16:9 monitor).Of course, the more difficult question is how to put three 30" LCDs into portrait mode. You would need a different base stand -- none of the 30" LCDs I've seen allow you to rotate the display into portrait mode, probably because the LCDs are two feet wide.
yyrkoon - Wednesday, November 18, 2009 - link
Hey Jarred,Why not be inventive, and make a stand to hold 3 x 30" LCDs ? I do not mean you specifically of course, but whomever would want to have one. It really is not that difficult . . . just a little planning, and the ability to work with steel ( heavy ) or quality aluminum. Now if someone did not have the skills to make brackets etc, they could even draw something up, give it to a local fabricator, and be on their merry way . . .
Personally, I like the first option mainly because I enjoy working with materials as such ( metals, wood, plastics, etc ). Not to mention the fact that it can cost far less doing it yourself.
JarredWalton - Thursday, November 19, 2009 - link
I understand it's entirely possible. My point is merely that it's yet another expense. I don't think 3x30" with EyeFinity is going to be anything but a very, *VERY* niche product. LOL.5970 = $600
3 x 30" = $3000 (minimum)
3 x Stands = $120 to $600
So besides having the money, you need the space (and possibly time). I'd say $4000+ just for the GPU and LCDs is where the costs start, and naturally you would want a killer system (i7-920 with overclocking, or i7-975). But hey, you want the best of the best, there you have it. Until the next big thing comes along.
Speaking of which, what about 30" LCDs with 120Hz and 3D Vision? LOL.... (No, I'm not saying that's out or coming soon, but it could be.)