Antec Skeleton: Space Age or Space Cadet?
by Christoph Katzer on October 13, 2008 6:00 PM EST- Posted in
- Cases/Cooling/PSUs
At Computex earlier this year, Antec showed us a prototype of the Skeleton. We recently received a sample of the final product. The whole chassis looks different now, which is good. Let's first start with a quick discussion of the case functionality. Who would need or want something like this? Frankly, I don't. I like small and sleek cases, preferably stored under my desk where I don't see or hear the PC. However, this case may be great for people that frequently change motherboard jumpers, and add or reconfigure other items. Some might even like the appearance of the case, which is a highly subjective area; many of us think it looks rather ugly, but as they say, beauty is in the eye of the beholder.
If you're mostly interested in the functionality, the outward appearance is rather irrelevant. Form follows function and that is an important part of this chassis. It looks somewhat like a lunar station with its half-moon structure and the large 250mm fan in the top. The front has the usual buttons and jacks: power, IEEE1394 FireWire, two USB ports, an eSATA port, and headset and microphone jacks. On the left side we find the reset button as well as a small status LED embedded in the plastic frame.
All of the cables hang out the back of the case, since there is nowhere to hide them. In the center of the chassis is a mounting plate for a large ATX motherboard, and as we will below you can slide the tray out of the chassis. The back has a thin clear acrylic frame installed that helps provide support for expansion cards (i.e. graphics cards). Below the motherboard in the back is the tray for the power supply. The sides feature a metal plate perforated with hexagonal shapes, and like the motherboard tray the PSU tray is removable. The fan in the top can be turned on and off with a small switch at the back, and a second switch allows you to control the LED lights.
Installing the components is fairly easy. You can slide the whole inside of the frame out the back by removing two screws on each side in the back. The power supply mounts in a small cage that can also slide out off the main frame. You can use a variety of power supplies, with an 80mm fan or 120mm fan, though a model with an 80mm fan would make more sense in this case since there are fewer obstructions to block airflow. After installing the main components, the motherboard easily slides into the frame and you can tighten the screws.
Houston? We have a problem.
Unfortunately, we couldn't install our three NVIDIA GeForce 8800 Ultras since we could not slide the motherboard tray back into the chassis. As you can see above, the first and last graphics cards collide with the upper part of the chassis. However, if your graphics card does not have a bulge like the 8800 Ultra you will not have this problem. In addition, we were able to slide the motherboard tray into the chasses without the cards and maneuver them into the slots inside of the chassis (though this required more effort than usual). The installation of all the other components went without problem.
Antec delivers a very sturdy case with the Skeleton and it's already available in the U.S. Europe still doesn't have any in stock, and the one shop that lists the Skeleton is asking €340 ($465) for it. The U.S prices are a little more moderate, starting at $140. Whether you find that price acceptable or not is for you to decide. However, there is another issue to consider. An open case like this does not have any EMI protection, which means in the worst case you will have problems with radio and/or TV reception when the system is on, particularly if it's near your stereo/television. Despite that, the case is something new in a market full of normal, dull cases. The exclusivity alone will attract some customers; there are certainly users who frequently swap components or simply like the unique design who will be interested in getting their claws on the Skeleton.
Facebook
Twitter
RSS
54 Comments
View All Comments
greylica - Monday, October 13, 2008 - link
This is a great innovation for overclockers, but need more attention on details like those of the VGA fans. Probably a 120MM Tower willn´t fit into the case too.Another great Idea is to put a grid outside the unit for cover, only to avoid some problems with curious persons that can´t resist to put a finger where isn´t alowed.
(Touch memory when the system is running ?:P )
To improve better cooling, a big fan without a duct can´t help a lot, most of the airflow is lost, then we prefer 4- 80X80 or 90X90 MM fans in the top with plastic ducts and temperature control. (tpc controller)
But well, this is a great change and an art piece for pcs.
Like some naked motorcycles, this atr case could be improved as well to the point we can admire a piece of art inside the desk.
4wardtristan - Monday, October 13, 2008 - link
for such a space age design, it doesnt look that spaciousMartimus - Monday, October 13, 2008 - link
"An open case like this does not have any EMI protection, which means in the worst case you will have problems with radio and/or TV reception when the system is on, particularly if it's near your stereo/television."I looks like a Faraday cage to me. It doesn't look very susceptible to EMI to me.
Griswold - Tuesday, October 14, 2008 - link
You dont seem to be familiar with the faraday cage concept - that or something is wrong with your eyes. :POtherwise you would know, that it has to be enclosed entirely by a conductive material, be it solid or a mesh. This thing has huge holes on all sides and therefore it will neither be protected from outside EMI nor will it keep EMI contained.
Aluvus - Tuesday, October 14, 2008 - link
A Faraday Cage encloses all sides with (usually) a metal mesh. This case has no shielding on the top area where the motherboard sits(superstructure looks to be mostly plastic, and is very open regardless), and the drive area is open on 2 sides. The case will provide very little protection from EMI.Goty - Monday, October 13, 2008 - link
Not enclosing all sides of the case just means it would radiate preferentially from the open sides. To completely block all emission, the system would have to be completely enclosed.I honestly don't see EMI being a big factor. How many cases do you see out there with windows in the side? Now, how many of those do you see causing any sort of noticeable interference with any other consumer electronics?
JarredWalton - Monday, October 13, 2008 - link
Actually, I've seen quite a bit of problems with radio interference. In fact, my radio reception in my house is *terrible* - probably has to do with the number of PCs/laptops downstairs. The real question is: how many people still listen to or watch OTA radio and TV transmissions? About the only time I have the radio on is in my car these days, and I've been using cable or satellite TV for two decades or more.Spacecomber - Tuesday, October 14, 2008 - link
I think that the problem is with more than just OTA radio/TV reception. Wires and other components in your electronic equipment can act as antennas in your electronic hardware and pick up (and transmit) this noise. This can add unwanted background noise to your HiFi, for example.I'm using a fairly well shielded computer as a music server, and I find that I have to be careful how some of the wires lay in relation to one and other in order to keep the background noise level as low as possible.
Screammit - Tuesday, October 14, 2008 - link
My cable provider charges extra for HD capability, now that you can get OTA HD service on major networks, I just use that, as there is no loss in signal quality and I can't get comedy central in HD yet :Pand I have definitely noticed a problem getting a signal with my HTPC turned on
Christoph Katzer - Tuesday, October 14, 2008 - link
Anyway, there is no reason to argue about it. In the European Union it is forbidden to sell products that aren't protected which means you cannot have any opening larger than 1cm². I am still searching for U.S regulations though but I am sure Antec can also bring some light into this matter.