FIRST LOOK: Abit Fatal1ty AA8XE
by Wesley Fink on November 9, 2004 8:30 AM EST- Posted in
- Motherboards
Performance Tests
DirectX 9 Gaming
Since Fatal1ty is targeted at gaming, we ran a much larger group of current DirectX 9 benchmarks than we would normally run in a First Look. The goal was to compare the Abit Fatal1ty performance on the most current games to 925X and nForce4.
The tweaks on the Fatal1ty board combined with the extra 2MB of L3 cache on the 3.46EE certainly allow the Abit to outperform the 925X with the faster 3.6GHz Prescott in most Direct X 9 games. The 1066FSB also contributes a very small amount to the increased performance as we found in the recent 925XE launch review. The Abit Fatal1ty is an outstanding performer compared to other Intel boards that we have tested. The improvement in Far Cry performance, in particular, is impressive.
However, all the outstanding tweaks and gaming enhancements just can't offset the gaming horsepower available with the FX55 and 4000+. In most DirectX 9 benchmarks at stock speed, the FX55 wipes the floor with the 3.46EE on the Fatal1ty.
Facebook
Twitter
RSS
46 Comments
View All Comments
Badash7 - Monday, November 22, 2004 - link
Does it have or will it have through a bios update support for ddr2 667mhz or faster memory like the asus 925xe p5ad2-e does?jonmcc33 - Saturday, November 13, 2004 - link
The "real" Jonathan Wendel is uncovered!http://www.eeob.iastate.edu/faculty/WendelJ/jonath...
jonmcc33 - Saturday, November 13, 2004 - link
Number 1 in talentless games like Quake 3 and Unreal Tournament and that makes him respected? A 5 year old could play those games.Maybe if he played Call of Duty or something else that requires skill then I'd think he deserves a motherboard named after him.
knitecrow - Friday, November 12, 2004 - link
those numbers don't matter for this boardthis board is targeted towards hard core gammers... who are slightly smarter than the average dell buyer.
the break down between AMD and Intel is very different for the performance gamming market. My guess is 60-40 (amd:intel)
Even Intel fanboyz are being persuaded by hard facts... for gamming Athlon64 is king.
OzMowerman - Friday, November 12, 2004 - link
AMDx86: 14.9%
notebook: 8.4%
server: 4.8%
Intel
x86: 83.6%
notebook: 90.1%
server: 96.9%
"a flea in the crack of an elephants arse" is the only thing that springs to mind
Its not hard to see why the amd fanboys get upset....LOL
when it comes to the end of the day, they make crap products and are untrustworthy.
Isnt it funny that its always the tight arse low income that sprulk amd the hardest.
If Intel made a chipset for amd processors, i would seriously consider buying one, but while our only choice is the backyarders via, and the incompetant nvidia, no thanks.
cryptonomicon - Thursday, November 11, 2004 - link
sorry, hard to resist flaming this board for some reason.cryptonomicon - Thursday, November 11, 2004 - link
so this board is really killer at.. uh.. what? media encoding and workstation performance? drool!Concillian - Wednesday, November 10, 2004 - link
#36:If those gamers are only overclocking the video card and do not overclock the CPU, they are potentially doing the right thing. What game fully utilizes an FX55 at the resolutions people actually use?
Games in general are not CPU bound at this point, so why fret over 5% here and there if the video card is going to limit your frame rates anyway? Get what's cheap for CPU and pimp out on the graphics card.
It would be nice to eventually see a review that exhibits just how GPU limited most games are even with the highest end GPUs. We always see CPU articls with the highest end GPUs to try to remove that side fo the equation and vice versa. But for a consumer they often have to take their budget and decide what gets spent where between CPU, RAM, and video cards. Probably the single most common decisions among gamers focus on these types of decisions, yet there are surprisingly few articles that focus on how to approch realistic purchasing decisions for these three critical components.
vailr - Wednesday, November 10, 2004 - link
#25: A serial port can be added to any USB port, using a USB-to-serial port adapter.$14.99 here: http://www.svc.com/usbsead.html
Wesley Fink - Wednesday, November 10, 2004 - link
#35 - My experience has been that ENTHUSIASTS know about water and phase-change cooling, but gamers usually don't know much about overclocking systems. If they overclock anything it's the video card. There are exceptions to every rule, but this is a GAMING system and I think our comments are apropos.If you believe the FX55 (2.6GHz) are not overclockable, you are not reading many articles. Most are reaching 2.9Ghz to 3.OGhz at stock voltage with air cooling. Those using water and phase-change are getting much higher results. The 90nm die-shrink will likely open the high-end even more for A64.