I'm wondering how a 3000+ would perform in the used setup with the OCZ Plat rev2. Assuming it can reach the MHZ, would it really be the same as a 4000+?
No doubt OCZ VX memory is cool. However, there is 1 major point to consider which I don't think anandtech did mention.
Whats the long term effects of pushing running 3.5V on A64. I have read from forums that some users ended up with dead CPUs after pushing high memory voltages. I am not sure but I guess they have a dead memory controller. Can A64's on-die memory controller handle 3.5V Vdimm for prolong periods? Such as 3-6 months or even longer?
AMD did mention before that running high Vdimm may damage the CPU and void the warranty though. Also, you would have notice that literally all board manufacturers other than DFI limits the Vdimm to just 2.85V.
man, i wish they included a sweet pair of BH-5 in all of their mem tests (one of the 280+ mhz pairs 2225 ~3.3-3.4v) just so i would have a point of reference to all this NEW ram.
Thx for the comment, but I was already aware of that. Wesley, plz post your DRAM & Genie BIOS settings used in this comparison. If there are any other OCZ VX users that have busted 250MHz, please post your settings.
"zebo, i have no idea what you tried to just say "
Don't worry about it just get the cheapest ram like Buffalo B-line /corsiar value and you'll be just fine. All this stuff is overated, overpriced and for competitive benchmarkers only.
#39-
i've been through 4 sticks of ballistix. all of them can make it to 245mhz at 2.5-2-2-5, which is the limit of my memory controller. i think inconsistancy is a thing of the past now.
i would try to prove you wrong on your second point, but i'd need a new cpu for that :(
We’ve updated our terms. By continuing to use the site and/or by logging into your account, you agree to the Site’s updated Terms of Use and Privacy Policy.
Facebook
Twitter
RSS
53 Comments
View All Comments
adg1034 - Tuesday, April 19, 2005 - link
Wesley- could you do a follow-up with the "Value VX"? I'd love to see how that does.Gogar - Friday, April 15, 2005 - link
I'm wondering how a 3000+ would perform in the used setup with the OCZ Plat rev2. Assuming it can reach the MHZ, would it really be the same as a 4000+?JoKeRr - Sunday, April 3, 2005 - link
#50, pretty sure A8N SLI gives Vdimm upto 3V.ISS - Saturday, April 2, 2005 - link
No doubt OCZ VX memory is cool. However, there is 1 major point to consider which I don't think anandtech did mention.Whats the long term effects of pushing running 3.5V on A64. I have read from forums that some users ended up with dead CPUs after pushing high memory voltages. I am not sure but I guess they have a dead memory controller. Can A64's on-die memory controller handle 3.5V Vdimm for prolong periods? Such as 3-6 months or even longer?
AMD did mention before that running high Vdimm may damage the CPU and void the warranty though. Also, you would have notice that literally all board manufacturers other than DFI limits the Vdimm to just 2.85V.
cryptonomicon - Thursday, March 31, 2005 - link
man, i wish they included a sweet pair of BH-5 in all of their mem tests (one of the 280+ mhz pairs 2225 ~3.3-3.4v) just so i would have a point of reference to all this NEW ram.NotoriousGIB - Thursday, March 31, 2005 - link
Ohh...last comment was for poster 26.NotoriousGIB - Thursday, March 31, 2005 - link
Thx for the comment, but I was already aware of that. Wesley, plz post your DRAM & Genie BIOS settings used in this comparison. If there are any other OCZ VX users that have busted 250MHz, please post your settings.Zebo - Thursday, March 31, 2005 - link
"zebo, i have no idea what you tried to just say "Don't worry about it just get the cheapest ram like Buffalo B-line /corsiar value and you'll be just fine. All this stuff is overated, overpriced and for competitive benchmarkers only.
ozzimark - Thursday, March 31, 2005 - link
#39-i've been through 4 sticks of ballistix. all of them can make it to 245mhz at 2.5-2-2-5, which is the limit of my memory controller. i think inconsistancy is a thing of the past now.
i would try to prove you wrong on your second point, but i'd need a new cpu for that :(
Teetu - Thursday, March 31, 2005 - link
is there anyway I get anand's complete settings for the ballistix ram?i know with the older bios DFI recommended bank interleave off, but has that changed with the 3/10 bios?