Buyer's Guide: Mid-Range to High-End, May 2005
by Jarred Walton on May 23, 2005 5:30 PM EST- Posted in
- Guides
Sound and Speakers
We've covered almost everything with the exception of sound. We feel that the integrated audio is sufficient for anyone who doesn't intend to do any recording of audio, so we don't feel that an actual sound card is really necessary. If you do want a sound card, you can always pick up a Creative Audigy 2 ZS for about $75 or the M-Audio Revolution 7.1 for about $90. Both are good cards, with the Creative having more of a gaming slant. However, those cards are rather expensive for the offered features, and you might want a sound card if your motherboard doesn't offer an S/PDIF connection for output, though you need speakers with an S/PDIF input to make use of such a feature. Since that's what we'll use for our High-End speaker selection, we're going to include a sound card specifically for that segment.
Click to enlarge.
Sound Card: Chaintech AV-710 7.1
Price: $27 Shipped
We're not going to blow a ton of money on the sound card, especially when all we're really interested in is the digital audio output. The good news is that the Chaintech card is still a good quality card and provides audio comparable to that of the Revolution 7.1 at a much lower cost. Powered by the VIA Envy 24PT chip, the card provides clean, crisp audio that many will feel is more than worth the price. Two stereo input ports are also present, which allows for line-in as well as a microphone. About the only thing missing is an S/PDIF IN port. If you want that, you'll need a more capable sound card like the Turtle Beach Catalina. It has 24-bit 7.1 audio along with optical in and out ports for around $50 if you're interested.
Click to enlarge.
Speakers: Logitech Z-5300e 5.1
Price: $135 Shipped
We're going with more capable speakers for our mid-range setup than what we've recommended in the past. If you don't need really nice audio from your PC, you can go with the cheaper X-530 speakers from Logitech or some good quality 2.1 speakers. You could even get by with no speakers, though we feel most people will want at least decent audio out of a $1000+ computer. The Z-5300e is the big brother to the X-530, with higher quality and better sounding satellites. They're also capable of much higher volume levels, so you can make sure that the whole neighborhood knows which movie you're watching - or not. Other than getting even louder speakers, the only real omission on the Z-5300e is support for digital connections. It's certainly not required, but many home theaters use digital audio connections, and with good reason. That brings us to the High-End recommendation.
Click to enlarge.
Speakers: Logitech Z-5500d 5.1
Price: $245 Shipped
If the Z-5300 is the big brother of the X-530, then the Z-5500d is the X-530's daddy. While there are other differences between the 5300 and 5500, the major addition is support for DTS and Dolby Digital decoding on the speakers. Sure, you can have the PC or sound card do that for you, but then you have to deal with potential noise and interference from the circuitry within the computer. If you go with a digital connection, you're basically guaranteed to get no interference up to the speakers. If you don't already have a decent home theater setup, the Z-5500d speakers are capable of giving much more expensive speakers a run for the money. They're not likely to beat out speakers costing thousands of dollars, but for the price, they're extremely impressive.
We've been saying "Logitech" a lot while talking about speakers, but they certainly aren't the only option out there. Altec Lansing, Boston Acoustics, Creative, and Klipsch are all reasonable alternatives, and the way sound is perceived varies from person to person - what we like may not be what you like. That said, Logitech has been extremely aggressive with their pricing. Klipsch ProMedia Ultra 5.1 speakers are another favorite of the high-end, and many would say that the warranty and support provided by Klipsch is more than worth the increased price. You would lose the digital aspect of the Z-5500d's if you go that route, however, and which speaker actually sounds better is something that audiophiles could debate for hours on end. We think that they both sound good, but digital inputs and $100 in savings is hard to argue with, which is why we've gone with the Logitech speakers. If you have further questions on the matter of speakers, the peripherals area of our forums is a good place to start.
Facebook
Twitter
RSS
60 Comments
View All Comments
PotterVilla - Wednesday, December 28, 2005 - link
Hello,I've not been able to find a XFX, MSI, or eVGA 6800GT graphics card at new egg (I'm not really looking to buy, just being wishful) and I also saw that the 6800XT is only $170. The 7800GT is more in your ballpark of $345 a card. Would ether of these cards be an upgrade, and has their price gone down that much ($175) in only about seven months?
Thank you.
jonp - Friday, August 26, 2005 - link
i wonder about the hp 1905fp recommend for the mid-range non-gaming display. there are considerable comments here and elsewhere about the poor analog (d-sub 15 pin) performance ie image quality. the Genesis gm-5321 controller chip is no longer shown on their web site and the datasheets are no longer available as well. (one wonders how much longer the 1905fp will even be available?) the dvi interface might be great, but there are some of us who connect their display through a kvm that only handles analog signals--so dvi performance is of little interest. i think we need a new monitor review and new pick for the non-gaming monitor recommendation. we depend on Anandtech for solid testing and non-subjective analysis to guide us in our quest for the best value. it is clear that we need new help in this area.JarredWalton - Thursday, June 16, 2005 - link
56 - not usually on NVIDIA nF3/4 or Intel chipsets. That's only an issue with secondary SATA controllers (VIA, SiS, Silicon Image, etc.) But still, never hurts to have that $8 part around just in case!mhallang - Wednesday, June 15, 2005 - link
Another reason to get a floppy drive is to install Win XP on a SATA drive. Maybe SP2 is different, and I would bet there's another way around it; but my experience was that I needed a floppy with the SATA drivers during the install process for XP.JarredWalton - Monday, June 13, 2005 - link
54 - Oh, I'd stay far away from XP64 for SLI. Raw doesn't begin to describe it, IMO. Longhorn is when I'll actually consider switching to a 64-bit OS.GreedyBumps - Thursday, June 9, 2005 - link
I built this system with all major components that are in this guide and cannot get SLI to work. Both cards work great individually but when I try to but them both in in SLI mode screen goes black after the black windows loading screen. I have tried all the driver / bios updates for everything I could find and still no dice.One issue could be that I installed Windows x64 professional - maybe some drivers are still too raw.
Also - the SLI jumpers on this DFI Lanparty board are a complete pain. They are tough to pull out and there are 6 of them. When you are trying to get SLI to work it is absolute nightmare to keep switching between SLI and Normal jumper cable settings.
JarredWalton - Wednesday, June 1, 2005 - link
52 - I got the information from Wesley. Basically, there is a higher number of RMA for motherboards and RAM when voltages above 3.3V are used. (Not too surprising, really, as higher V = higher heat.) 3.3V and below are fine, but there is a jumper to allow up to 4.0V. If you use that jumper, it causes problems. That's my understanding. In other words, don't plan on running OCZ VX at 3.7V with no active cooling. :)hgkfahgsa - Wednesday, June 1, 2005 - link
Jarred, could you elaborate on the problems with high voltages with the DFI cards? Is there any chance of the problems being resolved, does 3.3 volts work? etc... Thanks.JarredWalton - Friday, May 27, 2005 - link
50 - I know there are some Turtle Beach cards with S/PDIF in and out connections. M-Audio also has some, i.e. the Delta and Audiophile. Which one you want depends on the use. Most only have optical *OR* coaxial (RCA). I think many of the models with external boxes have both. If you were interested in an expensive, "everything" solution, there's the Audigy 4 Pro, but that's $280 or so, and I can't vouch for the actual quality as a whole.Honestly, I'm not a demanding audio person. If you want more advice on audio, I'm sure there are people in our forums that can provide better advice for "pro level" cards. You may as well ask me for advice on cars while you're at it! (Get something cheap and reliable!) ;-)
devslash - Friday, May 27, 2005 - link
how important is capability of S/PDIF input. i dont see many motherboards that have this on-board.isn't it important/good to have it, so DVD's audio
can be directly fed into the on-board sound system?
can you recommend a good board w/ S/PDIF input?