FIRST LOOK: NVIDIA GeForce 6100 Performance

43 Comments

View All Comments

• reload1992 - Wednesday, February 27, 2008 - link

  I am building a pc for the first time Is this a good motherboard for gaming?

• Calin - Monday, October 10, 2005 - link

  I would like to change my mainboard/processor (as they are still in the 600MHz range), and I really would like one of those things. However, not wanting to pay the whole extra $100 for a socket 939 processor, I would like to know the performance of the Socket 754 board (coupled with an Sempron processor).
  In case your plans does not accout for making tests with the dual channel memory board, could you please test it with a single DIMM (in order to simulate a 754 board on the hardware you have)?
  
  Thank you very much
  Calin

• varundubey - Tuesday, September 27, 2005 - link

  Hi, in your article here:
  http://www.anandtech.com/mb/showdoc.aspx?i=2539">http://www.anandtech.com/mb/showdoc.aspx?i=2539
  
  you say that NVIDIA 6100/430 and NVIDIA 6100/410 support pure video but Nvidia disagrees here:
  http://www.nvidia.com/page/gpu_mobo.html">http://www.nvidia.com/page/gpu_mobo.html
  
  should be a tad more careful no?

• glennpratt - Wednesday, October 5, 2005 - link

  NVIDIA has corrected the link.

• Wesley Fink - Thursday, September 29, 2005 - link

  The chart showing Pure Video support for the 6100/410 is cut and pasted from nVidia launch literature for the 6100. If it's wrong or in conflict with other nVidia publications please talk with nVidia for clarification.

• Phiro - Tuesday, September 27, 2005 - link

  Varun, they've abandoned us to fend for ourselves.

• LoneWolf15 - Monday, September 26, 2005 - link

  My best use for this would be an nForce 430/GF6150 mATX board for a HTPC setup. I'll be eagerly waiting to see how this does. It'd be great to use an entry-level Sempron or A64 as part of a small, quiet rig for this sort of application, and the onboard HD audio, gig Ethernet (for transferring files from a media server across the intranet), and HD over TV-out are all big plusses.
  
  I'll be waiting to see this tested when it becomes available, as I'm once-bitten-twice-shy on the nVidia PureVideo thing, but if it can meet or beat the on-paper specs, it looks to be a winner.

• Phiro - Friday, September 23, 2005 - link

  Question - was the HL2 benchmark run under the DX8 or DX9 codepath?
  
  I ask because the numbers to me seemed to compare the 6100 to the Geforce 5700. You show the 6100 getting 55fps at 800x600 in HL2 with normal/low settings. The 5900XT gets 104fps with highest settings w/o AA in a similar setup, until I read closely and saw that was with the DX8 codepath. Forcing the 5900XT to use the DX9 codepath knocks it down to ~30fps if I recall.
  
  If that's true, and the 6100 was run under the DX9 codepath and it got 55fps with lowered settings, that still puts this video card a big chunk above a 5700 IMO.

• Phiro - Monday, September 26, 2005 - link

  Wesley, you can't quit reading the feedback from an article you write less than 24 hours after you post said article.
  
  Come on, fess up w/the information!

• Wesley Fink - Thursday, September 29, 2005 - link

  I'm not the graphics guru, but I thought the DX9/DX8 codepaths were an early HL2 concern long since resolved. At any rate we run HL2 thorugh Steam and update before benching. The system is XP SP2 9.0c. The bench utility is the Guru3D HL2 benchmarking tool running Guru3D Demo5. The HL2 update from the last few days has corrupted all of of HL2 benchmarks - including the Guru3D tool - but that's another story.