ThermalTake Tenor (cont’d)
Getting away from the front, we find that the Tenor keeps a relatively simple look for the rest of the case. Extra ventilation is situated over the CPU and video card, which certainly seems to make sense.
Click to enlarge.
A head-on shot of the back reveals the major difference of the Tenor in plain view; the power supply is not in the front of the case at all as it was in the other HTPC cases that we’ve looked at so far.
Click to enlarge.
Before diving inside the Tenor, here is one of the feet of the case. Just like most HTPCs, with nice looking feet, the case should fit much better when placed with other pieces of equipment.
Click to enlarge.
Taking off the three-side cover reveals a complicated bracing and drive cage layout, but without the side panels and after the removal of the braces, this actually becomes a very easy case in which to work.
Click to enlarge.
The entire front of the case comes away as well, and in this angle shot here, we can get a better idea of how this case is constructed. One nice aspect that we noticed at this step is that all the cables from the front go through one hole, which has been rounded out carefully.
Click to enlarge.
Taking the two braces away and focusing on the front, we find the three 5¼” drive bays and triple 3½” bay (two of which are externally accessible). To actively bring in cooler air, one 80mm fan is located here as well, but we couldn’t help but notice that there aren’t enough ventilation holes to cover the area of the fan’s blades.
Click to enlarge.
And here, we can finally see just how open the Tenor can get. Looking at the back, it actually looks much more like a typical ATX case, just turned on its side, with two 70mm Thermaltake fans taking care of exhausting the majority of the warm air from the case.
Click to enlarge.
Facebook
Twitter
RSS
26 Comments
View All Comments
warped6 - Tuesday, November 22, 2005 - link
I purchased one of these back in the late spring. I too tried putting the DVD in the bottom position and it didn't fit. I then found out that it wasn't meant to hold an optical drive. It's meant to hold a VFD display so you can have the extra little door open to see the display. You can see this on there web site.Unless there is a short optical drive that I haven't found yet.I also replaced all of the fans with quieter ones. That helped quite a bit as far as noise.
I've been very happy with the box, now if I could just get the software to work the way I want it too and so the wife can deal with it, I could move it into the living room. :-)
bearxor - Tuesday, November 22, 2005 - link
I know a lot of people are complaining because you reviewed some fairly low-end HTPC cases, but these are all in the price range that I'm looking at, which is 90-130. I was settled on a Cooler Master case, but after reading what you guys wrote about the Tenor, I might just go with it. I had decided against it because of the blue LED lights, but like you said, I could just disconnect them.Not all of us are willing to spend 200-300 dollars on just a case for our HTPC, this review was for us.
bschuler2004 - Tuesday, November 22, 2005 - link
I still contend the best HTPC is a HTPC out of sight controlled via RF remote. Why even have a pc in the living room? Your cable company doesn't put it's Video On Demand servers in your living room.. why would you? It just doesn't make sense. Plus, then you can use any case, can be as loud as you want.. cuz nothing in the living room is as quiet as an Svideo,Rca, etc cable.. You save money, space, and alot of headaches.BigLan - Tuesday, November 22, 2005 - link
I agree, to a point. My HTPC is a generic mid-tower which has similar dimensions to my sub. It doesn't really look too out of place except fot the blue LED in the power supply.I've been thinking more and more that the ideal setup would be a non-descript PC box on the floor or hidden, with an external usb DVD drive (or two) and the remote control receiver placed near the amp/receiver.
Most of the current htpc cases seem to appeal to the bling factor, which I learned the hard way meant loud fans and inadequate cooling.
PDubya - Tuesday, November 22, 2005 - link
On page 5, the "removable cap" looks to be recessed, so I'm guessing you could place some filtration medium in that capped area. Just my two cents.Tamale - Tuesday, November 22, 2005 - link
but that's the exhaust.. I'm still not sure what good putting a filter on the exhaust side of the power supply would do...bldckstark - Tuesday, November 22, 2005 - link
I agree that putting a filter on the exhaust side would be useless, but the cover is there for some reason. I have several machines here at work that have covers very similar to this that are used for air intake filters. Was the PSU checked for air flow direction? Maybe they reversed it in this application.bldckstark - Tuesday, November 22, 2005 - link
The users manual states in the cooling section that you should not "block the air intake vents on the top panel, the front left side (at the filter) or the back (ventilated PCI slot covers." They are calling it an intake. This is the EC manual, not the US version. They are quite different, and there is no mention of the cover in the US version.http://www.antec.com/us/support_productInfo_detail...">EC users manual in English - pdf
Check page 6 under "Important Notes On Cooling"
UrQuan3 - Tuesday, November 22, 2005 - link
I understand that this review is geared more towards gaming rigs in the livingroom than for video recording/playback machines, still I'd like to know about some of those systems as well. I've been looking at picking up either an ATX P4 or a mini-ITX Pentium M machine from http://www.hushtechnologies.net/">Hush. Just wondering if anyone has tried one.OrSin - Tuesday, November 22, 2005 - link
500 is the low end of those case. They you pay extra for stuff like a reset buttom.Crazy over priced. I could see going as high $ or even alittle more if you want the front display, but $500+ ?. I guess if I spent $10,000 on Theathe systems it would not too bad. But $500 you could just hide a regular systems in the wall or something.