Actual Application Times - Multimedia and File Manipulation

The following tests require a fast CPU and excellent write performance of the disk drive. Our Super Talent drive will probably never run video/audio encoding applications in its target market so our tests are only meaningful for indicating the write performance of the drive in write heavy applications. These results and any conclusions about the performance of the drive need to be tempered with the commercial/industrial market this drive is designed to operate in. Again, we fully expect the new consumer SSD drives from Samsung and SanDisk to be competitive in these tests considering their improved write speeds.

Nero Recode

Our encoding test is quite easy - we take our original Office Space DVD and use AnyDVD Ripper to copy the full DVD to the hard drive without compression, thus providing an almost exact duplicate of the DVD. We then fire up Nero Recode 2, select our Office Space copy on the hard drive, and perform a shrink operation to allow the entire movie along with extras to fit on a single 4.5GB DVD disc. We leave all options on their defaults except we turn off the advanced analysis option. The scores reported include the full encoding process and are represented in seconds, with lower numbers indicating better performance.

Media Encoding Performance - Nero Recode 2

This test is dependent on CPU performance and the write performance of the drive. As in our PCMark05 tests, the write performance of the Super Talent drive does not match that of our other test drives and is a little over four times slower than our Raptor drive, but it did finish the test without any issues.

WinRAR 3.62

Our WinRAR test measures the time it takes to compress our test folder that contains 444 files, 10 folders, and 602MB of data. This is the same test folder utilized in our IPEAK test suite. While the benchmark is CPU intensive for the compression tests it still requires a fast storage system to keep pace with the CPU. A drive that offers excellent write performance can make a slight difference in this benchmark.

File Compression Performance - WinRAR 3.62

This test relies much more on the CPU and burst rates of the storage system. Even handicapped with 25 MB/sec write speed, the Super Talent drive is only about 7% slower than the Raptor.

File Copy Performance

Our first file copy test measures the time it takes to transfer our test folder that contains 29 files, 1 folder, and has 7.55GB of data from our source drive to the target test drive. This benchmark is disk write intensive and requires a fast storage system.

File Copy Performance - Office Space

We finish our application tests with a benchmark that favors the hard disk drives due to being a pure write scenario. As in PCMark05 where the largest differences in scores were generated with the write tests, we see the SSD product being over four times slower than the Raptor. This was fully expected but not that bad when compared to the 5400rpm drives from a few years ago - especially the 2.5" laptop models.

Gaming Performance Operating System Times
Comments Locked

44 Comments

View All Comments

  • eguy - Monday, May 14, 2007 - link

    These guys are knowledgable and sell the Super Talent and other SSDs. They are even working on a RAID0 SSD box! http://www.dvnation.com/nand-flash-ssd.html">http://www.dvnation.com/nand-flash-ssd.html .

    There are not many SSDs that can benefit from RAID0. The issue is that the CONTROLLERS used IN these disks max out in speed before the NAND chips will. That means that the Samsung NAND chips while capable of 60+MB/S are throttled by a controller than in some cases will only do 25MB/S. In a hard disk, the media transfer rate is lower than the controller's bandwith. The hard disk controller can do 150MB/S+. So in hard drive land a 50MB/S hard disk + another 50MB/S hard disk = about 100MB/S in RAID0. But I've seen a 25MB/S SSD + 25MB/S SSD =, you ready for this? 17MB/S. DV Nation is predicting they will have a RAID0 box out later this year that can outperform a single SSD. They couldn't get the ultra-fast IDE Samsungs to RAID up. I told them I wanted to do 2X SATA SSDs in RAID and they said their customers had not had success with that.
    I'm thinking newer models might in the future.

    Also don't get bent out of shape between SATA and IDE in SSDs. IDEs are just as fast, if not faster than SATA. Even in the world of hard drives, IDE vs SATA does not matter in speed. Drive makers CHOOSE to make their fastest consumer drives in SATA, but even a 10 year old IDE interface is capable of 166MB/S, right? My 10,000 RPM SATA RAPTOR can only to 75MB/S, so IDE would be just as fast for it.

    Modern SSDs will outlast hard disks. Forget the write cycles. They are rated between 1,000,000 and 5,000,000 write cycles. The problem is, hard disks are not rated in write cycles. For an apples to apples comparison, you need to use MTBF (mean time between failures). SSDs are rated much MUCH higher in that regard. Look at documentation on Sandisk's site, Samsungs, all the big manufacturers and independent reviewers. I've seen math done that shows life of up to 144 years! (!??!!)
  • Bladen - Tuesday, May 8, 2007 - link

    I think many of us would be interested in seeing exactly what RAID 0 can do for these things. It would be good to compare 2x RAID 0 of this drive vs 2x RAID 0 of the Sandisk and/or Samsung ones, and compare that to 2x RAID Raptors too.

    Just be particularly flattering to Sandisk or Samsung to get another drive of them if you can.
  • abakshi - Tuesday, May 8, 2007 - link

    If I recall, the price point for the current (OEM) SanDisk 32GB SSD is $350 in volume. If those (which are shipping in laptops today) have much better performance than this, why would anyone use this in an industrial/medical/etc. application - pay $150 more for 1/2 the space and a slower drive? Am I missing something here?

    Also, any idea of when are the SanDisk/Samsung/etc. consumer SSD's coming out?

  • PandaBear - Thursday, May 10, 2007 - link

    Yeah, longer life span if you do not read/write a lot. HD wear out regardless of use but flash usually doesn't. Also, industrial environment don't usually use a lot of storage but have a lot of packaging limitation (can't fit a large HD or don't have enough cooling) that rule out HD.

    Check out Hitachi's Endurastar HD, they are rated for industrial grade but are more expensive and smaller capactiy. Now that is a better comparison.
  • MrGarrison - Wednesday, May 9, 2007 - link

    Samsung's SSDs are already out. Check Newegg. They are even available here in Sweden.

    I would buy two of their 16GB SSDs if only they had SATA interface. Oh well, guess I'll have to wait a couple of months more.
  • Calin - Tuesday, May 8, 2007 - link

    Interesting review, but I have a small problem with it:
    Please, compare the cost per gigabyte of the 2.5" SSD drive with the cost per gigabyte of other 2.5" mechanical hard drives.
    While totally correct, the cost of $0.4/GB of current 3.5", high-capacity hard drives is much lower than the cost for the 2.5" mechanical hard drives (somewhere around the $1/GB, or slightly higher for low capacity drives).
    The 16GB 2.5" SSD don't fit in the place of a Raptor, and a Raptor won't fit in the place of a SSD 16GB drive.

    Thanks
  • bob4432 - Monday, May 7, 2007 - link

    are the power requirements for the seagate 7200.2 correct - .87W / 2.42W?
  • MadBoris - Monday, May 7, 2007 - link

    I'm just very disappointed with performance on these for consumer PC usage.
    I mean this is solid state memory.
    Somebody is going to break this wide open with performance someday, because flash is just so damn slow it's painful to write this.

    Making a RAMDRIVE today (using a portion of system RAM) on our PC's is thousands fold faster only lacking volatility for persistent data.

    Just duct tape some RAM sticks together on a PCB, hook a duracell to it and we should be good. ;) Well, you get the idea...We need to leverage performance of RAM today.

    Wake me up when this technology gets interesting.
  • Shadar - Monday, May 7, 2007 - link

    The article seems to imply that transfer rates are the problem with performance. In this case a RAID of 2 or 4 of these in RAID-0 would drastically increase performance. 4 of these in a Raid 0 should crush a standard hard drive as the transfer rate would always be higher and it would have blazing access times.

    Though I must wonder why the CF cards are not raided as it is inside this drive. Why wouldn't the manufacturer be using 4 4GB cards in a raid array to boost the speeds themselves inside the box?
  • yyrkoon - Monday, May 7, 2007 - link

    quote:

    The article seems to imply that transfer rates are the problem with performance. In this case a RAID of 2 or 4 of these in RAID-0 would drastically increase performance. 4 of these in a Raid 0 should crush a standard hard drive as the transfer rate would always be higher and it would have blazing access times.


    Yeah sure, lets take something with an already severely limited lifespan, and decrease the lifespan by abusing it with RAID . . . Lets not forget that 4 of these drives would set you back over $2000, and it makes even less sense to do so.

    I have done intesive testing in this area of my own, and to tell you the truth, *you* do not need that type of performance. *you*, of course meaning, you, me, or the next guy. Besides all this, if you really want to waste you money in the name of peformance, why dont you get 4x or more servers, capable of supporting 32 GB of memory each, use iSCSI, export 31GB of ram from each server, and RAID across those. If you're worried about redundancy, toss in a couple of Raptors into the initiator, and run RAID 0+1, or RAID 10 for redundancy . . .

Log in

Don't have an account? Sign up now