Athlon Heatsink Roundup (February 2000)
by Tillmann Steinbrecher on February 21, 2000 12:00 PM EST- Posted in
- Cases/Cooling/PSUs
RDJD
K701
RDJD,
a division of JMC (a fan manufacturer), is a quite new heatsink manufacturer.
They are specialized in "bonded fin" heatsinks, a heatsink design that
allows compact, light, and yet efficient heatsinks. Here is the K701, RDJD's
first Athlon heatsink:
The K701 fits all Athlon motherboards, and does not block any DIMM slots. It comes with a preinstalled thermal pad - for better performance, remove the pad and apply thermal compound. All tests were also run using thermal compound. To be honest, it was a bit unfair to include the K701 in this comparison, since it only has one small fan.
Here are two close-ups - one of the "bonded fins", one of the clip:
The RDJD K701 is also sold under the name "3DfxCOOL K7HO"
The fan
The
K701 comes with a fan in a rather unusual format: 52x52x15mm. The fan is
manufactured by JMC, so both heatsink and fan come from the same company,
which is also unusual; most heatsink manufacturers buy their fans from
third-part vendors. The fan spins at around 6000rpm, but the noise level
is not very high.
Installation
The
K701 comes with a unique mounting mechanism: It uses a clip, like most
other heatsinks, but the clip can be tightened using a screw. That means
that installation isn't tool-free, but the solution is still very convenient
and allows secure mounting.
Conclusion
Considering
that only one small fan is used, the performance of this heatsink is remarkable.
This certainly isn't the heatsink hardcore overclockers will chose, but
for those who aren't overclocking but want good cooling without excessive
noise, the RDJD K701 is a good choice. This heatsink clearly shows that
there's a high potential in the "bonded fin" technology. I'm waiting for
the day RDJD decides to make huge Alpha-style heatsinks with two 60mm fans
using this technology... Currently, RDJD offers two dual fan Athlon heatsinks,
but heatsinks are not larger than the K701's, and the dual fan units do
not fit the ASUS K7M.
RDJD K701 at a glance |
Fan:
One 52x15mm JMC
Fan
rpm (measured): 5921
Weight: 250g (!) |
Advantages |
|
Disadvantages |
|
0 Comments
View All Comments