Display Recommendations

Before we get to the actual display recommendations, we have to say that the end of the CRT era is upon us. No matter how much you like your 21" CRT running at 2048x1536 resolution with a high refresh rate, there's a very good chance that the next major display upgrade that you make will be to an LCD. Why? It's simply a matter of reduced profit margins. In fact, looking at the current CRT landscape, we can see that specifications have fallen off quite a bit in the past few years.

We used to look at 19" models that could run 1600x1200 at 85 Hz or higher, and quality 17" models frequently supported 1600x1200 at 75 Hz. Today, the best new 17" models support 1280x1024 at 67 Hz (which means that you'll run them at 60 Hz or else drop down to 1152x864 to get 75 Hz). 19" models still support 1600x1200 and sometimes higher resolutions, but only at 75 Hz or lower refresh rates. Even the 21" models have diminished in quality. The Mitsubishi Diamond Pro 2070 had a 140 kHz horizontal scan rate, allowing for 2048x1536 at 85 Hz or 1600x1200 at 115 Hz.

Unless you want to buy a refurbished display, you'll have difficulty finding a monitor that can beat those specs now. The NEC FE2111SB has a 115 kHz horizontal scan rate, limiting it to 85 Hz at 1600x1200 or 75 Hz at its maximum 1920x1440 resolution. Competing models are similar in specifications if not worse. In short, though the top CRTs still offer reasonable performance for the price, they're a dying breed. If you love CRTs - particularly the large models - we'd suggest that you try to find a Diamond Pro 2070 or NEC FP2141SB (the NEC model seems to be quite a bit more expensive, but specifications are nearly identical to the 2070). We've found the 2070 for around $650, but quantities are limited and you may not be purchasing a new display.

Unless we see a new CRT that actually boasts better specs than the older models, we're going to move on to recommending LCDs for the Mid-Range and High-End price segments. Prices have dropped to the point where most people will prefer an LCD to a CRT anyway. The displays have a perfectly flat surface and there are no geometry problems - no more worries about trying to adjust the pin-cushioning, convergence, rotation, etc. You also get to deal with a 10- to 20-pound display rather than a 40- to 85-pound display. There are still issues with pixel response times, color reproduction, and contrast ratios, but with CRTs devolving and LCDs improving, we expect that LCDs will dominate the market in the future.


Click to enlarge.

Mid-Range Display
19" LCD: Hyundai Imagequest L90D+
Price: $350 Shipped

People on a budget might still prefer a good 19" CRT, which can save about $100 on the cost of the display. We prefer working with LCDs, however, and we've selected one of the best LCDs currently available. (Hopefully, we'll get a review of one soon.) You can find cheaper 19" LCDs, but we're interested in quality as well, and the L90D+ delivers. With an advertised 8ms response time, even the worst case gray-to-gray transitions are fast enough to all but eliminate motion blur. The monitor also has a pivot function and reasonable cable management, and of course, it has a DVI connection. It has a standard VGA D-SUB input as well, though we wouldn't recommend using that, and the integrated speakers are present, but they're not very useful. The one major drawback: this is a 6-bit panel, so there is interpolation present to "mimic" 16.2 million colors. It's still the best 19" LCD that you'll find for gaming, however.

If you want alternatives, the Dell 1905FP is also a reasonable option, and sometimes it can be found for under $300. Motion blur is present on the 1905FP, but depending on your sensitivity to such things, it may or may not be useable for gaming. There are quite a few models selling for under $350, but we would stay away from anything with more than a 16ms response time, and DVI-D input is a must for LCDs. We would also try to get a true 8-bit panel rather than one that uses interpolation. That eliminates most of the other options, unfortunately. One thing that we always advise with LCDs is to try the display out in person if at all possible - if you purchase it at a local store, you can verify that there are no dead pixels present before leaving the premises, which may be more important than the savings offered by purchasing online.

Note: We've had several notes in this Guide, but we feel they're all important. The Hyundai L90D+ currently uses a Samsung panel. However, Hyundai could change panel providers at any time if they feel there is a benefit in doing so. The Samsung 915N uses this same panel, and you can now read our review. The L90D+ adds the DVI input we wanted, and hopefully they continue to use this panel.

Click images to enlarge.

High-End Display
20" LCD: Dell 2001FP/2005FPW
Price: About $530

Dell offers both their widescreen and standard 20" diagonal LCDs for around the same price, and while we prefer the 2001FP for computer work, some people like the 16:9 aspect ratio on the 2005FPW more. Gamers will probably have better luck with the 2001FP, although if you look around, there are tweaks to get widescreen support in many games these days. The problem is getting support for the uncommon 1680x1050 resolution of the 2005FPW. If you're not particularly interested in gaming, it's not as big of a concern. Just remember that the actual screen real-estate of the 2001FP is slightly larger than the 2005FPW: 1,920,000 vs. 1,764,000 pixels.

Other than those points, the monitors perform about the same and cost about the same. Note that on the price, we say "about $530" - if you're patient and look around, Dell often comes out with some great rebates that can drop the cost to below $500. Still, $530 is a great deal for such a display. With 16ms advertised response times, most people will be able to play games, watch movies, etc. without noticing too much "motion blur" (i.e. blurriness caused by delays in the pixels switching between varying color levels). If you're really picky about such issues, try before you buy, as even the fastest LCDs don't update as fast as a good CRT. Over time, you'll probably grow accustomed to the LCD display - most of us have, and we really like many of the other benefits that LCDs offer.

We'd like to see some 21" and larger LCDs with good resolutions at an affordable price, but so far, most models above 20" other than the Dell are extremely expensive, offer lesser specs, or both. Dell offers their 24" widescreen 2405FPW with a native resolution of 1920x1200 for around $1200, which is probably the best price that you'll find for specs like that. Dell has become the 800 lbs. gorilla of the LCD market, after all. Most people would love to have such a display, or perhaps even a couple Apple 23" or 30" Cinema Displays, but reality prevents us from actually going that extreme.

Case and Power Recommendations Sound and Speakers
Comments Locked

60 Comments

View All Comments

  • arswihart - Monday, May 23, 2005 - link

    jarred,
    I know you put a lot of work into these articles, and I take back saying this article is bs. You obviously don't need someone like me telling you you have made good recommendations, but regardless, most of your recommendations are very good.
  • arswihart - Monday, May 23, 2005 - link

    btw, theres the Epox 9npa-sli for $158 shipped, not mentioned even while its been out for months

    if anandtech doesn't review it, it doesn't exist I guess
  • arswihart - Monday, May 23, 2005 - link

    jarred,
    hey man, re-reading my posts and your reply, I feel I was being an ass with some of my language and tone. But you really are ignoring Epox products and always focusing on Asus and MSI for unknown reasons, and I even wonder sometimes if your site is getting some compensation for these recommendations. Don't get me wrong, they make good products, but really I don't get how you are constantly ignoring, not even mentioning, and Epox products, why?
  • JarredWalton - Monday, May 23, 2005 - link

    arswihart - That article by Kris was the first I heard of the issues, and needless to say the Buyer's Guide was written early last week. I am in the process of editing the MSI Neo4 recommendation.
  • raskren - Monday, May 23, 2005 - link

    What's the deal with these gingerbread house cases? All the other computer peripherals look fairly sleek but I would be embarassed to have either one of those cases on or UNDER my desk.
  • arswihart - Monday, May 23, 2005 - link

    direct quote from today's CPU article:
    "On another side note, we have heard several reports about 90nm Athlon 64 processors performing poorly in MSI’s K8N Neo4 product line. We will have more details for you in the near future, but if you are in between motherboards and you are also planning a 90nm purchase, you may want to stay away from the K8N until we can either verify or dispute those K8N reports."
  • arswihart - Monday, May 23, 2005 - link

    oh, I neglected to notice they are focusing exclusively on nf4 boards now, as if nf3 has no merits at all at this point (and sli is "a must for high-end, yeah right).

    Well, there's the 9npaj for $94.50 shipped @ newegg, 5 bucks more than for a chaintech, you make the call
  • arswihart - Monday, May 23, 2005 - link

    amazing

    they continue to recommend msi neo4, even while their last article admits the boards have issues with 90nm AMD64's, truely amazing. And the Epox 9nda3j continues to be ignored, at $90 shipped from newegg, I'd much rather have it than either of the boards they recommend. Truly rediculous recommendations, this is a bs article no doubt about it.
  • Olaf van der Spek - Monday, May 23, 2005 - link

    > We feel that the integrated audio is sufficient for anyone who doesn't intend to do any recording of audio, so we don't feel that an actual sound card is really necessary.

    What's gonna do all the audio effects in games then? I doubt every effect can be simulated by software.
  • ghd nz - Monday, January 7, 2013 - link

    http://www.ghdhairstraighteners4nz.org

Log in

Don't have an account? Sign up now