A Trio of Thermaltake Towers
by Joshua Buss on August 16, 2006 2:30 AM EST- Posted in
- Cases/Cooling/PSUs
Thermaltake Aguila - External and Internal
Making a welcome re-appearance, the famously easy to use Thermaltake "handscrews" show up again holding the side panel in place, but they're entirely optional given the decently strong keyed latches at the top and bottom of the panel. The back panel itself is actually two pieces which are each removable and re-configurable to allow BTX motherboards to work as well, keeping this case's prospective audience nice and large.
As for the bottom, the Aguila also has the telltale Thermaltake rotatable feet, and in addition to the area behind the door there is also ventilation holes on the bottom of the case. Now let's take a closer look at the inside of the Aguila.
In terms of overall size, the Aguila proves to be just big enough for a full ATX system, which will appeal to anyone who has only a small area to work or needs to transport the machine a lot.
Hard drives in the Aguila mount sideways like the Eureka's, but they're in a removable cage like the Eclipse's that first locks into place and is then secured with a single case screw. In practice the cage was easy to use and the drives stayed quiet thanks to the rubber grommet mounts.
Unlike many of the more compact cases, this cage holds four drives instead of three, but that's still one less than the Eclipse's five. The bay under the hard drive cage is great for tucking extra cables or putting in one of Thermaltake's 5.25" "accessory trays". Speaking of 5.25" drives, let's look a little closer at the optical drive installation.
The Aguila supplies plastic and steel rails that friction-mount to each optical drive to be installed. These rails helped our drive (which unfortunately has been missing its tray cover for a while now) slide in very easily and lock in place securely. While playing around with the different drive configurations, we decided to try moving the front door to the right hinge entirely, and this proved very simple.
In addition we tried the vertical 5.25" bay just for fit, and while it was a little tight it certainly worked. Note that this pretty much kills the usefulness of the hard drive cage, but there is one free 3.5" bay in the included power / reset bay, so if one only has a single hard drive they could certainly use the vertical mount if they chose.
Without the door attached at all, the Aguila still looks very nice, resembling the latest Mac computer with the similar perforated look, or the Armor with simply smaller flaps. Again though, these can be removed completely if desired with a standard Phillips screwdriver.
Making a welcome re-appearance, the famously easy to use Thermaltake "handscrews" show up again holding the side panel in place, but they're entirely optional given the decently strong keyed latches at the top and bottom of the panel. The back panel itself is actually two pieces which are each removable and re-configurable to allow BTX motherboards to work as well, keeping this case's prospective audience nice and large.
 |
| Click to enlarge |
As for the bottom, the Aguila also has the telltale Thermaltake rotatable feet, and in addition to the area behind the door there is also ventilation holes on the bottom of the case. Now let's take a closer look at the inside of the Aguila.
 |
| Click to enlarge |
In terms of overall size, the Aguila proves to be just big enough for a full ATX system, which will appeal to anyone who has only a small area to work or needs to transport the machine a lot.
 |
| Click to enlarge |
Hard drives in the Aguila mount sideways like the Eureka's, but they're in a removable cage like the Eclipse's that first locks into place and is then secured with a single case screw. In practice the cage was easy to use and the drives stayed quiet thanks to the rubber grommet mounts.
 |
| Click to enlarge |
Unlike many of the more compact cases, this cage holds four drives instead of three, but that's still one less than the Eclipse's five. The bay under the hard drive cage is great for tucking extra cables or putting in one of Thermaltake's 5.25" "accessory trays". Speaking of 5.25" drives, let's look a little closer at the optical drive installation.
 |
| Click to enlarge |
The Aguila supplies plastic and steel rails that friction-mount to each optical drive to be installed. These rails helped our drive (which unfortunately has been missing its tray cover for a while now) slide in very easily and lock in place securely. While playing around with the different drive configurations, we decided to try moving the front door to the right hinge entirely, and this proved very simple.
 |
| Click to enlarge |
In addition we tried the vertical 5.25" bay just for fit, and while it was a little tight it certainly worked. Note that this pretty much kills the usefulness of the hard drive cage, but there is one free 3.5" bay in the included power / reset bay, so if one only has a single hard drive they could certainly use the vertical mount if they chose.
 |
| Click to enlarge |
Without the door attached at all, the Aguila still looks very nice, resembling the latest Mac computer with the similar perforated look, or the Armor with simply smaller flaps. Again though, these can be removed completely if desired with a standard Phillips screwdriver.
Facebook
Twitter
RSS
43 Comments
View All Comments
cbuchach - Wednesday, August 16, 2006 - link
I have been looking to upgrade my case for some time now with my planned new build and really think the Aguila may fit the bill. Unfortunately the windowless version that I would be interested seems to be very hard to come by in the US at this time. We'll see.imaheadcase - Wednesday, August 16, 2006 - link
Yah been hard to find windowless one in the states, I found one but they inflated the price to like $300. lame.Budman - Wednesday, August 16, 2006 - link
One word. YUCKKalessian - Wednesday, August 16, 2006 - link
I don't understand why you would say that. The Eureka is very plain... what kind of cases do you like?I think a black Aguila would look great.
imaheadcase - Wednesday, August 16, 2006 - link
The agila is the only decent case, the others look like rejects from Voltron casting.Frumious1 - Wednesday, August 16, 2006 - link
There's a law on AnandTech case reviews: no matter what they might review, a bunch of people have to show up and grouse about how the cases look like crap, or they're nice looking but too expensive, or some other opinion followed by the statement that "no one would ever buy these...." Luckily, AnandTech seems to do a reasonable job of just presenting the facts on the cases and letting people decide for themselves whether or not they like how the case looks and would be interested in purchasing one.Too bad the Eureka is loud and cools the HDD/mosfets so poorly. Of course, I prefer a bit smaller cases anyway, and the Aguila looks pretty decent.
Frumious1 - Wednesday, August 16, 2006 - link
Oh yeah - I still don't trust the big orange TT fans. Things spin pretty fast and make a decent racket in my experience. Maybe some of them are better now, but the older 120mm dayglo orange things were pretty mediocre. I'm actually surprised any of these cases can manage to come in under 40 dB! Guy I know bought an Armor last year; freakin' turbine that thing is! Doesn't need to blow dry his hair if he angles the fans properly....tk109 - Wednesday, August 16, 2006 - link
I agree. They are ugly as butt.I saw the first one and I thought that maybe the rest will be better. But nope. One of them isn't too bad but I'd still not want to own it even if it was given to me. Like most of the case trends in recent years I think you have to be one of those super nerds to like em or something. They try way to hard on cases. Clean, straight, and simple is the way to go.
GoatMonkey - Wednesday, August 16, 2006 - link
Get yourself an iMac and be done with it then.
KorruptioN - Wednesday, August 16, 2006 - link
Or a Lian-Li.